Jump to content

Transparent wood composite

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Yapadaryko (talk | contribs) at 13:10, 26 September 2018 (added reference). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Transparent wood composites are novel wood materials which have up to 90% transparency and higher mechanical properties than wood itself, made for the first time in 1992.

When these materials are commercially available, a significant benefit is expected due to their inherent biodegradable properties since it is wood. These materials are significantly more biodegradable than glass and plastics.[1][2][3]. Transparent wood it is also shatterproof. On the other hand, concerns may be relevant due to the use of non-biodegradable plastics for long lasting purpose, such as in building.

History

A research group led by Professor Lars Berglund[4] from Swedish KTH University along with a University of Maryland research group led by Professor Liangbing Hu[5][6] have developed a method to remove the color and some chemicals from small blocks of wood, followed by adding polymers, such as Poly(methyl methacrylate) and epoxy, at the cellular level, thereby rendering them transparent.

As soon as released in between 2015 and 2016, see-through wood had a large worldwide impact, with articles in ScienceDaily,[7] Wired,[8] the Wall Street Journal,[9] the New York Times,[10] to name a few.

Actually those research groups rediscovered a work from Siegfried Fink, a German Researcher, from as early as 1992: with a process very similar to Berglund's and Hu's, the German Researcher turned wood transparent to reveal specific cavities of the wood structure for analytical purpose.[11]

The process

Transparent wood was made based on the idea of removing light-absorbing components (mainly lignin) followed by infiltration of a polymer with a refractive index matching the wood substrate [12].

One example is a three step process:

The first step consists of immersing the 4 or 5 inch block of wood in a solution of water, sodium hydroxide, and sodium sulfite at boiling temperature for two hours. This enables the lignin in the cell walls to be leached out. "Lignins are particularly important in the formation of cell walls, especially in wood and bark, because they lend rigidity and do not rot easily".

The second step of oxidation with hydrogen peroxide completes the leaching of the lignin.

The third step consists of immersing the material in epoxy and putting it under alternating vacuum and atmospheric pressure; this fills the wood's natural but now disused nutrient and hydrating microscopic channels. The epoxy-filled microscopic channels create a material that has transparent refractive properties.

The new material is rated stronger than plastic, but is only in the laboratory and experimental stage, and not yet ready for commercial use.[1][2]

The length of the process is determined by the size and species of the wood.

Future

Transparent wood could transform architecture because we could make transparent wood structures, or load-bearing windows, and much more. All the future buildings would be much more energy efficient because as it is known that wood is much better isolation material than glass.

Transparent wood could also be solution for making much more durable smartphones and other electronic devices that won't break as easily when dropped on the ground.

References

  1. ^ a b St. Fluer, Nicholas (13 May 2016). "Wood That Could be Mistaken for Glass". The New York Times. New York City. Retrieved 16 May 2016.
  2. ^ a b Scharping, Nathaniel (16 May 2015). "Transparent Wood Is a Surprisingly Versatile Material". Discover. Online. Retrieved 16 May 2015.
  3. ^ Mingwei Zhu, Jianwei Song, Tian Li; et al. (2016). "Highly Anisotropic, Highly Transparent Wood Composites". Advanced Materials. 28 (26): 5181–5187. doi:10.1002/adma.201600427. PMID 27147136. Retrieved 16 May 2015. {{cite journal}}: Explicit use of et al. in: |last= (help)CS1 maint: multiple names: authors list (link)
  4. ^ Li, Yuanyuan (2016). "Optically Transparent Wood from a Nanoporous Cellulosic Template: Combining Functional and Structural Performance". Biomacromolecules. 17 (4): 1358–1364. doi:10.1021/acs.biomac.6b00145. PMID 26942562.
  5. ^ Zhu, Mingwei; Song, Jianwei; Li, Tian; Gong, Amy; Wang, Yanbin; Dai, Jiaqi; Yao, Yonggang; Luo, Wei; Henderson, Doug (2016-05-04). "Highly Anisotropic, Highly Transparent Wood Composites". Advanced Materials. 28 (26): 5181–5187. doi:10.1002/adma.201600427. ISSN 0935-9648.
  6. ^ url =http://www.bingnano.com/
  7. ^ https://www.sciencedaily.com/releases/2016/03/160330085735.htm
  8. ^ https://www.wired.co.uk/article/transparent-wood-building-walls-solar-cells
  9. ^ https://www.wsj.com/articles/what-could-we-build-with-extra-strong-see-through-wood-1461254815
  10. ^ https://www.nytimes.com/2016/05/12/science/see-through-wood.html?_r=0
  11. ^ Fink, Siegfried (1992-01-01). "Transparent Wood – A New Approach in the Functional Study of Wood Structure". Holzforschung. 46 (5): 403–408. doi:10.1515/hfsg.1992.46.5.403. ISSN 1437-434X.
  12. ^ Li, Yuanyuan (2018). "Optically Transparent Wood: Recent Progress, Opportunities, and Challenges". Advanced Optical Materials. 6 (14): 1800059. doi:10.1002/adom.201800059.

Further reading

  • Fink, S. (1992). "Transparent Wood; A New Approach in the Functional Study of Wood Structure". Holzforschung-International Journal of the Biology, Chemistry, Physics and Technology of Wood. 46(5), 403-408. Chicago. doi:10.1515/hfsg.1992.46.5.403
  • Berglund, L., et al. (2018). "Bioinspired Wood Nanotechnology for Functional Materials". Advanced Materials, 30(19), 1704285. doi:10.1002/adma.201704285
  • Zhu, H., et al. (2014). "Transparent paper: fabrications, properties, and device applications". Energy & Environmental Science, 7(1), 269-287. doi:10.1039/c3ee43024c
Retrieved from "https://en.wikipedia.org/w/index.php?title=Transparent_wood_composite&oldid=861299435"