Jump to content

USNS Grapple

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Trappist the monk (talk | contribs) at 14:51, 28 June 2016 (External links: template for NVR urls; using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

USNS Grapple (ARS 53)
USS Grapple (ARS 53).
History
Name
  • USS Grapple (ARS 53)
  • USNS Grapple (T-ARS 53)
Ordered29 October 1982
BuilderPeterson Builders, Sturgeon Bay, Wisconsin
Laid down25 April 1984
Launched8 December 1984
Commissioned15 November 1986
Decommissioned13 July 2006
MottoReady to Serve
Honours and
awards
Marjorie Sterrett Battleship Fund Award (2000)
FateTransferred to MSC NFAF
Badge
General characteristics
Class and typeSafeguard-class salvage ship
Displacement
  • 2,633 long tons (2,675 t) light
  • 3,317 long tons (3,370 t) full load
Length255 ft (78 m)
Beam51 ft (16 m)
Draft17 ft (5.2 m)
Propulsion4 × Caterpillar 399 diesel engines
Speed15 kn (28 km/h; 17 mph)
Complement
  • 7 officers and 92 enlisted (USS)
  • 4 military and 26 civilian (USNS)
Armament

USS Grapple (ARS-53) is a Template:Sclass- in the United States Navy. Her home port is Norfolk, Virginia. On 13 July 2006 Grapple was decommissioned from US Navy service and converted to civilian operation by Military Sealift Command. She was redesignated as USNS Grapple (T-ARS 53).

Role

Rescue and salvage ships render assistance to disabled ships, provide towing, salvage, diving, firefighting and heavy lift capabilities.

The mission of the rescue and salvage ships is fourfold: to debeach stranded vessels, heavy lift capability from ocean depths, towing of other vessels, and manned diving operations. For rescue missions, these ships are equipped with fire monitors forward and amidships which can deliver either firefighting foam or sea water. The salvage holds of these ships are outfitted with portable equipment to provide assistance to other vessels in dewatering, patching, supply of electrical power and other essential service required to return a disabled ship to an operating condition.

The Navy has responsibility for salvaging U.S. government-owned ships and, when it is in the best interests of the United States, privately owned vessels as well. The rugged construction of these steel-hulled ships, combined with speed and endurance, make these rescue and salvage ships well-suited for rescue/salvage operations of Navy and commercial shipping throughout the world. The versatility of this class of ship enables the U.S. Navy to render assistance to those in peril on the high seas.

Capabilities

Grapple is designed to perform combat salvage, lifting, towing, off-ship firefighting, manned diving operations, and emergency repairs to stranded or disabled vessels.[1][2][3]

Salvage of disabled and stranded vessels

Disabled or stranded ships might require various types of assistance before retraction or towing can be attempted. In her 21,000 cubic feet (590 m3) salvage hold, Grapple carries transportable cutting and welding equipment, hydraulic and electric power sources, and de-watering gear. Grapple also has salvage and machine shops, and hull repair materials to effect temporary hull repairs on stranded or otherwise damaged ships.[1][2]

Retraction of stranded vessels

Stranded vessels can be retracted from a beach or reef by the use of Grapple's towing machine and propulsion. Additional retraction force can be applied to a stranded vessel through the use of up to six legs of beach gear, consisting of 6,000-pound (2,700 kg) STATO anchors, wire rope, chain, and salvage buoys. In a typical configuration, two legs of beach gear are rigged on board Grapple, and up to four legs of beach are rigged to the stranded vessel.[4]

In addition to the standard legs of beach gear, Grapple carries 4 spring buoys. The spring buoys are carried beneath the port and starboard bridge wings. Each spring buoy weighs approximately 3,100 pounds (1,400 kg), is 10 feet (3.0 m) long and 6 feet (1.8 m) in diameter, provides a net buoyancy of 7½ tons, and can withstand 125 tons of pull-through force.[4] The spring buoys are used with beach gear legs rigged from a stranded vessel when deep water is found seaward of the stranded vessel.

Towing

Grapple's propulsion machinery provides a bollard pull (towing force at zero speed and full power) of 68 tons.[5][6]

The centerpiece of Grapple's towing capability is an Almon A. Johnson Series 322 double-drum automatic towing machine. Each drum carries 3,000 feet (910 m) of 2 14-inch-diameter (6.4 mm) drawn galvanized, 6×37 right-hand lay, wire-rope towing hawsers, with closed zinc-poured sockets on the bitter end. The towing machine uses a system to automatically pay in and pay out the towing howser to maintain a constraint strain.[5][6]

The automatic towing machine also includes a Series 400 traction winch that can be used with synthetic line towing hawsers up to 14 inches in circumference. The traction winch has automatic payout but only manual recovery.[5][6]

The Grapple's caprail is curved to fairlead and prevent chafing of the towing hawser. It includes two vertical stern rollers to tend the towing hawser directly aft and two Norman pin rollers to prevent the towing hawser from sweeping forward of the beam at the point of tow. The stern rollers and Norman pins are raised hydraulically and can withstand a lateral force of 50,000 pounds (23,000 kg) at mid barrel.[5]

Two tow bows provide a safe working area on the fantail during towing operations.[5]

Grapple tows Inflict, Fearless and Illusive.

USS Inflict (MSO-456), Fearless (MSO-442) and Illusive (MSO-448) were towed to the Gulf of Oman by USS Grapple (ARS-53), which departed Little Creek, Virginia on 6 September 1987. They traveled via the Suez Canal and arrived in the Gulf of Oman on 2 November 1987. At the time, the 9,000-nautical-mile (17,000 km) trip was the longest distance three ships were towed by one.[7]

Manned diving operations

Grapple has a several diving systems to support different types of operations. Divers descend to diving depth on a diving stage that is lowered by one of two powered davits.

The diving locker is equipped with a double-lock hyperbaric chamber for recompression after deep dives or for the treatment of divers suffering from decompression sickness.[8]

The MK21 MOD1 diving system supports manned diving to depths of 190 feet (58 m) on surfaced-supplied air. A fly-away mixed gas system can be used to enable the support of diving to a maximum depth of 300 feet (91 m).[8]

The MK20 MOD0 diving system allows-surface supplied diving to a depth of 60 feet (18 m) with lighter equipment.[8]

Grapple carries SCUBA equipment for dives that require greater mobility than is possible in tethered diving.[8]

Recovery of submerged objects

In addition to her two main ground tackle anchors (6,000-pound (2,700 kg) Navy standard stockless or 8,000-pound (3,600 kg) balanced-fluke anchors) Grapple can use equipment associated with her beach gear to lay a multi-point open water moor to station herself for diving and ROV operations.[2]

A typical four-point-moor consists of an X pattern with four Stato Anchors at the outside corners and Grapple at the center, made fast to a spring buoy for the close end of each mooring leg with synthetic mooring lines. Using her capstans, Grapple can shorten or lengthen the mooring line for each leg and change her position within the moor.[9]

Grapple has a 7.5-ton-capacity boom on her forward kingpost and a 40-ton-capacity boom on her aft kingpost.[6][8][10]

Heavy Lift

Grapple has heavy lift system that consists of large bow and stern rollers, deck machinery, and tackle. The rollers serve as low-friction fairlead for the wire rope or chain used for the lift. The tackle and deck machinery provide up to 75 tons of hauling for each lift. The two bow rollers can be used together with linear hydraulic pullers to achieve a dynamic lift of 150 tons. The stern rollers can be used with the automatic towing machine to provide a dynamic lift of 150 tons. All four rollers can be used together for a dynamic lift of 300 tons[8] or a static tidal lift of 350 tons.[11]

Grapple also has two auxiliary bow rollers, which can support a 75-ton lift when used together.[8]

Off-ship fire-fighting

Grapple has three manually operated fire monitors, one on the forward signal bridge, one on the aft signal bridge, and one on the forecastle, that can deliver up to 1,000 gallons per minute of seawater or aqueous film forming foam (AFFF)[8] When originally built, Grapple had a fourth remotely controlled fire monitor mounted on her forward kingpost,[1] but this was later removed. Grapple has a 3,600 gallon foam tank.[6]

Emergency ship salvage material

In addition to the equipment carried by Grapple, the US Navy Supervisor of Salvage maintains a stock of additional emergency fly-away salvage equipment that can be deployed aboard the salvage ships to support a wide variety of rescue and salvage operations.[12][13]

Awards

In 2000, she won the Marjorie Sterrett Battleship Fund Award for the Atlantic Fleet.

Operations

Adriatic Sea (F-16 recovery)

Newfoundland's Botwood Harbor

USNS Grapple in Newfoundland's Botwood Harbor July 2014. Body recovery from a 1940s plane wreck.

Corsica (Calvi)

October 2012 research operation diving on a sea landing B-17 in WWII

Atlantic Ocean, 100km (62 miles) south of Nantucket

November 1999, participated in the salvage operation of EgyptAir Flight 990[14]

St. Magarets Bay, Nova Scotia, Canada

September 1998, helped in the recovery of Swissair Flight 111[15]

References

  1. ^ a b c http://www.history.navy.mil/shiphist/s/ars-52/1986.pdf USS Salvor Command History 1986
  2. ^ a b c http://www.history.navy.mil/shiphist/g/ars-53/2002.pdf USS Grapple Command History 2002
  3. ^ http://www.navy.mil/navydata/fact_display.asp?cid=4400&tid=800&ct=4 US Navy Fact File: Rescue and Salvage Ships T-ARS
  4. ^ a b http://www.everyspec.com/USN/NAVSEA/S0300-A7-HBK-010_1-04_4163/ US Navy Salvage Manual Volume 1: Strandings and Harbor Clearance
  5. ^ a b c d e https://www.procurement.msc.navy.mil/procurement/AttachmentViewer?sectionType=CommonDocumentSection&id=20000071&fileId=60004154 US Navy Towing Manual
  6. ^ a b c d e http://handle.dtic.mil/100.2/ADA483590" Naval Postgraduate School Thesis: Recapitalization of the Future Towing and Salvage Platform
  7. ^ Grapple ships history 1987
  8. ^ a b c d e f g h http://www.history.navy.mil/shiphist/s/ars-52/2003.pdf USS Salvor Command History 2003
  9. ^ http://safetycenter.navy.mil/afloat/articles/diving/Mooring.htm Naval Safety Center: "A Four-Point Moor is Taxing and Challenging"
  10. ^ http://www.supsalv.org/00c2_ars50.asp Supervisor of Salvage Towing Assets: T-ARS 50 Safeguard Class Salvage Vessel
  11. ^ http://www.supsalv.org/pdf/SALVORS_HANDBOOK_1-04.pdf US Navy Salvor's Handbook
  12. ^ http://www.supsalv.org/essm/ Emergency Ship Salvage Material
  13. ^ http://www.essmnavy.net/Salvage%20Catalog.pdf Emergency Ship Salvage Material (ESSM) Catalog Salvage Equipment Volume 1 (S0300-BV-CAT-010)
  14. ^ http://www.navysite.de/ars/ars53.htm
  15. ^ http://www.tsb.gc.ca/eng/rapports-reports/aviation/1998/a98h0003/01report/01factual/rep1_12_01.asp

Public Domain This article includes information collected from the Naval Vessel Register, which, as a U.S. government publication, is in the public domain. This article contains information from a United States Navy web site which is in the public domain.

  • Official site
  • NHC - USS Grapple ship's histories
  • DANFS - Grapple II (it also has Grasp ARS-51 material mixed into it making it misleading)
  • NVR - ARS-53