User:GooNabO/sandbox

This is the user sandbox of GooNabO. A user sandbox is a subpage of the user's user page. It serves as a testing spot and page development space for the user and is not an encyclopedia article. Create or edit your own sandbox here.

Other sandboxes: Main sandbox | Template sandbox

Finished writing a draft article? Are you ready to request review of it by an experienced editor for possible inclusion in Wikipedia? Submit your draft for review!

Chemistry[edit]

Mercury batteries use either pure mercuric oxide or a mixture of mercuric oxide with manganese dioxide as the cathode. Mercuric oxide is a non-conductor so some graphite is mixed with it; the graphite also helps prevent collection of mercury into large droplets. The anode is made of zinc and separated from the cathode with a layer of paper or other porous material soaked with electrolyte. During discharge, zinc oxidizes to zinc oxide and mercuric oxide gets reduced to elemental mercury. A little extra mercuric oxide is put into the cell to prevent evolution of hydrogen gas at the end of life. Mercury batteries are very similar to silver-oxide batteries.^[1]

The overall reaction is: $Zn+HgO\rightarrow ZnO+Hg$ ^[1]

The cathode half-reaction is: HgO + H₂O + 2e^- → Hg + 2OH^-^[1]

with a [standard potential] of +0.0977 V vs. NHE

The 2 anode half-reaction consists of an electrochemical reaction step: Zn + 40H^- → Zn(OH)₄^-2 + 2e^-^[1]

followed by the chemical reaction step: Zn(OH)₄^-2 → ZnO + 2OH^- + H₂O^[1]

yielding an overall cathode half-reaction of: Zn + 2OH^- → ZnO + H₂O + 2e^{-^[1]}

Sodium hydroxide or potassium hydroxide are used as an electrolyte. Sodium hydroxide cells have nearly constant voltage at low discharge currents, making them ideal for hearing aids, calculators, and electronic watches. Potassium hydroxide cells, in turn, provided constant voltage at higher currents, making them suitable for applications requiring current surges, e.g. photographic cameras with flash, and watches with a backlight. Potassium hydroxide cells also have better performance at lower temperatures. Mercury cells have very long shelf life, up to 10 years.^[1]

A different form of mercury battery uses mercuric oxide and cadmium. This has a much lower terminal voltage around 0.9 volts and so has lower energy density, but it has an extended temperature range, in special designs up to 180 C.^[1] A 12 volt battery of this type was formerly used for residential smoke detectors, where the two-step voltage characteristic gave a useful warning for replacement.^[2]

^ ^a ^b ^c ^d ^e ^f ^g ^h Cite error: The named reference Linden02 was invoked but never defined (see the help page).
^ Thomas Roy Crompton Battery reference book page 5-23.

[Linden02-1] ^ ^a ^b ^c ^d ^e ^f ^g ^h Cite error: The named reference Linden02 was invoked but never defined (see the help page).

[2] Thomas Roy Crompton Battery reference book page 5-23.

[1]

[2]