Cessna 140

From Wikipedia, the free encyclopedia
  (Redirected from Cessna 120)
Jump to: navigation, search
Cessna 120
& 140
Cessna C 140 NC-1872V OTT 2013 01.jpg
Cessna 140
Role Light utility aircraft
Manufacturer Cessna Aircraft Company
Introduction 1946
Produced 1946-1951
Number built 7,664
Unit cost
US$3495 (Cessna 140 in 1946)[1]

The Cessna 120, Cessna 140, and the Cessna 140A are single-engine, two-seat, conventional landing gear (tailwheel), light general aviation aircraft that were first produced in 1946, immediately following the end of World War II. Production ended in 1951, and was succeeded in 1959 by the Cessna 150, a similar two-seat trainer which introduced tricycle gear. Combined production of both aircraft was 7,664 units in five years.[1][2]

Development[edit]

Cessna 140[edit]

Cessna 140 on takeoff

The Cessna 140 was originally equipped with a Continental C-85-12 or C-85-12F horizontally-opposed, aircooled, four-cylinder piston engine of 85 hp (63 kW). The Continental C-90-12F or C-90-14F of 90 hp (67 kW) was optional, as was the 108 hp (81 kW) Lycoming O-235-C1 engine, an aftermarket installation authorized in the type certificate. This model had a metal fuselage and fabric wings with metal control surfaces. The larger Cessna 170 was a four-seat 140 with a more powerful engine.[1][2][3]

Restored 1946 Cessna 140

Cessna 120[edit]

Cessna 120, built 1947

The Cessna 120 was an economy version of the 140 produced at the same time. It had the same engine as the 140, but lacked wing flaps. The rear-cabin "D" side windows and electrical system (radios, lights, battery and starter) were optional.[1][2][3] A 120 outfitted with every factory option would be nearly equivalent to a 140, but the International Cessna 120/140 Association believes that no 120s were originally built this way. Despite this, many decades' worth of owner-added options have rendered many 120s almost indistinguishable from a 140 aside from the absence of wing flaps. The 120 was dropped from production upon introduction of the 140A in 1949.[4]

Cessna 140A[edit]

Cessna 140A with the single wing strut

In 1949, Cessna introduced the 140A, a new variant with aluminum-covered wings and single wing struts instead of the fabric wing covering, dual "V" struts, and jury struts fitted on earlier models. Standard engines were the Continental C-90-12F or C-90-14F of 90 hp (67 kW), with the 85 hp (63 kW) Continental C-85-12, C-85-12F, or C-85-14F engines optional. The spring-steel gear had been swept 3 in (8 cm) forward on 120 and 140 models in late 1947 so wheel extenders were no longer necessary to counter nose-over tendencies during heavy application of brakes; all 140A models had the improved gear legs.[1][2][5][6][7] Despite these improvements, sales of the 140 lineup faltered, and the 140A comprised only seven percent of overall 120/140 production.[4]

Modifications[edit]

Common modifications to the Cessna 120 and 140 include:

  • "Metalized" wings, where the fabric is replaced with light-gauge sheet aluminum, eliminating the need to periodically replace the wing fabric.[1][4]
  • The installation of landing gear extenders to reduce the tendency of the aircraft to nose-over on application of heavy braking. These were factory-optional equipment.[4][8]
  • Installation of rear-cabin "D" side windows on 120s that were not originally so equipped.[4]
  • Installation of electrical systems on 120s that were not originally so equipped, allowing owners to install an electric starter, more sophisticated avionics and/or lights for night flying.[1][4]
  • Installation of a more powerful engine. A popular conversion today is to replace the original C-85 or C-90 with a 100 hp (75 kW) Continental O-200. A kit is available to install a Lycoming O-320 but this conversion is less prevalent due to a roughly 100 lb (45 kg) weight penalty and a sharp increase in fuel consumption.[4]

Specifications (Cessna 140)[edit]

A typical Cessna 140 cockpit.
1946 Cessna 140 Interior

Data from The Complete Guide to the Single-Engine Cessnas,[1] AOPA Pilot,[4] and Aircraft Specification No. A-768.[3]

General characteristics

  • Crew: one
  • Capacity: one passenger
  • Length: 21 ft 6 in (6.55 m)
  • Wingspan: 33 ft 4 in (10.16 m)
  • Height: 6 ft 3 in (1.91 m)
  • Wing area: 159.3 sq ft (14.80 m2)
  • Empty weight: 890 lb (404 kg)
  • Gross weight: 1,450 lb (658 kg)
  • Fuel capacity: 25 US gallons (95 litres)
  • Powerplant: 1 × Continental C-85 four cylinder, four stroke, horizontally opposed aircraft engine, 85 hp (63 kW)
  • Propellers: 2-bladed Sensenich[4]

Performance

  • Maximum speed: 125 mph (201 km/h; 109 kn)
  • Cruise speed: 105 mph (91 kn; 169 km/h)
  • Stall speed: 45 mph (39 kn; 72 km/h) flaps down
  • Never exceed speed: 140 mph (122 kn; 225 km/h)
  • Range: 450 mi (391 nmi; 724 km)
  • Service ceiling: 15,500 ft (4,724 m)
  • Rate of climb: 680 ft/min (3.5 m/s)
  • Wing loading: 9.1 lb/sq ft (44 kg/m2)

See also[edit]

Related development
Aircraft of comparable role, configuration and era

References[edit]

  1. ^ a b c d e f g h Christy, Joe: The Complete Guide to the Single-Engine Cessnas - 3rd Edition, pages 12-17. TAB Books, 1979. ISBN 0-8306-2268-3
  2. ^ a b c d Plane and Pilot: 1978 Aircraft Directory, page 22. Werner & Werner Corp Publishing, 1978. ISBN 0-918312-00-0
  3. ^ a b c Federal Aviation Administration (March 2003). "AIRCRAFT SPECIFICATION NO. A-768". Retrieved 10 January 2011. 
  4. ^ a b c d e f g h i Twombly, Ian J. (October 2011). "Budget Buy: Drag your tail - cheaply!". AOPA Pilot 54 (10): 60–66. Retrieved 2011-10-27. 
  5. ^ International Cessna 120-140 Association, Landing Gear Legs and Extenders for the Cessna 120/140/140A Planes
  6. ^ Phillips, Edward H: Wings of Cessna, Model 120 to the Citation III, Flying Books, 1986. ISBN 0-911139-05-2
  7. ^ Federal Aviation Administration (March 2003). "AIRCRAFT SPECIFICATION NO. 5A2". Retrieved 10 January 2011. 
  8. ^ Cessna (1954). "Cessna Model 120 & 140 Parts Catalog". Retrieved 2009-08-08. 

External links[edit]