Jump to content

Control engineering

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Andre Oliveira Junior (talk | contribs) at 00:31, 25 November 2022 (Burns, S. Roland. Advanced Control Engineering. Butterworth-Heinemann. Auckland, 2001. ISBN 0750651008). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Control systems play a critical role in space flight

Control engineering or control systems engineering is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments.[1] The discipline of controls overlaps and is usually taught along with electrical engineering and mechanical engineering at many institutions around the world.[1]

The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems.[2]

Overview

Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance F-16 fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem.

History

Control of fractionating columns is one of the more challenging applications

Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788.

In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis.

Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes.

Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the very first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today.

Control theory

Main article: Control theory

There are two major divisions in control theory, namely, classical and modern, which have direct implications for the control engineering applications.

Classical SISO System Design

The scope of classical control theory is limited to single-input and single-output (SISO) system design, except when analyzing for disturbance rejection using a second input. The system analysis is carried out in the time domain using differential equations, in the complex-s domain with the Laplace transform, or in the frequency domain by transforming from the complex-s domain. Many systems may be assumed to have a second order and single variable system response in the time domain. A controller designed using classical theory often requires on-site tuning due to incorrect design approximations. Yet, due to the easier physical implementation of classical controller designs as compared to systems designed using modern control theory, these controllers are preferred in most industrial applications. The most common controllers designed using classical control theory are PID controllers. A less common implementation may include either or both a Lead or Lag filter. The ultimate end goal is to meet requirements typically provided in the time-domain called the step response, or at times in the frequency domain called the open-loop response. The step response characteristics applied in a specification are typically percent overshoot, settling time, etc. The open-loop response characteristics applied in a specification are typically Gain and Phase margin and bandwidth. These characteristics may be evaluated through simulation including a dynamic model of the system under control coupled with the compensation model.

Modern MIMO System Design

Modern control theory is carried out in the state space, and can deal with multiple-input and multiple-output (MIMO) systems. This overcomes the limitations of classical control theory in more sophisticated design problems, such as fighter aircraft control, with the limitation that no frequency domain analysis is possible. In modern design, a system is represented to the greatest advantage as a set of decoupled first order differential equations defined using state variables. Nonlinear, multivariable, adaptive and robust control theories come under this division. Matrix methods are significantly limited for MIMO systems where linear independence cannot be assured in the relationship between inputs and outputs [citation needed]. Being fairly new, modern control theory has many areas yet to be explored. Scholars like Rudolf E. Kálmán and Aleksandr Lyapunov are well known among the people who have shaped modern control theory.

Control systems

Main article: Control system

Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering.

Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles.

In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a PID controller system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved.

Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors.

Control engineering education

At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering,[3] and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield [4] and the Department of Robotics and Control Engineering at the United States Naval Academy.[5]

Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which requires a thorough background in elementary mathematics and Laplace transform, called classical control theory. In linear control, the student does frequency and time domain analysis. Digital control and nonlinear control courses require Z transformation and algebra respectively, and could be said to complete a basic control education.

Control engineering careers

A control engineer's career starts with a bachelor's degree and can continue through the college process. Control engineer degrees are well paired with an electrical or mechanical engineering degree. Control engineers usually get jobs in technical managing where they typically lead interdisciplinary projects. There are many job opportunities in aerospace companies, manufacturing companies, automobile companies, power companies, and government agencies. Some places that hire Control Engineers include companies such as Rockwell Automation, NASA, Ford, and Goodrich.[6] Control Engineers can possibly earn $66k annually from Lockheed Martin Corp. They can also earn up to $96k annually from General Motors Corporation.[7]

According to a Control Engineering survey, most of the people who answered were control engineers in various forms of their own career. There are not very many careers that are classified as "control engineer," most of them are specific careers that have a small semblance to the overarching career of control engineering. A majority of the control engineers that took the survey in 2019 are system or product designers, or even control or instrument engineers. Most of the jobs involve process engineering or production or even maintenance, they are some variation of control engineering.[8]

Recent advancement

Originally, control engineering was all about continuous systems. Development of computer control tools posed a requirement of discrete control system engineering because the communications between the computer-based digital controller and the physical system are governed by a computer clock. The equivalent to Laplace transform in the discrete domain is the Z-transform. Today, many of the control systems are computer controlled and they consist of both digital and analog components.

Therefore, at the design stage either digital components are mapped into the continuous domain and the design is carried out in the continuous domain, or analog components are mapped into discrete domain and design is carried out there. The first of these two methods is more commonly encountered in practice because many industrial systems have many continuous systems components, including mechanical, fluid, biological and analog electrical components, with a few digital controllers.

Similarly, the design technique has progressed from paper-and-ruler based manual design to computer-aided design and now to computer-automated design or CAD which has been made possible by evolutionary computation. CAD can be applied not just to tuning a predefined control scheme, but also to controller structure optimisation, system identification and invention of novel control systems, based purely upon a performance requirement, independent of any specific control scheme.[9][10]

Resilient control systems extend the traditional focus of addressing only planned disturbances to frameworks and attempt to address multiple types of unexpected disturbance; in particular, adapting and transforming behaviors of the control system in response to malicious actors, abnormal failure modes, undesirable human action, etc.[11]

See also

References

  1. ^ a b "Systems & Control Engineering FAQ | Electrical Engineering and Computer Science". engineering.case.edu. Case Western Reserve University. 20 November 2015. Retrieved 27 June 2017.
  2. ^ Burns, S. Roland. Advanced Control Engineering. Butterworth-Heinemann. Auckland, 2001. ISBN 0750651008
  3. ^ Zhang, Jianhua (2017). Mechatronics and Automation Engineering. doi:10.1142/10406. ISBN 978-981-320-852-0.
  4. ^ "ACSE - The University of Sheffield". Retrieved 17 March 2015.
  5. ^ "WRC Home". USNA Weapons, Robotics and Control Engineering. Retrieved 19 November 2019.
  6. ^ "Systems & Control Engineering FAQ | Computer and Data Science/Electrical, Computer and Systems Engineering". engineering.case.edu. 2015-11-20. Retrieved 2019-10-30.
  7. ^ "Control Systems Engineer Salary | PayScale". www.payscale.com. Retrieved 2019-10-30.
  8. ^ https://www.controleng.com/wp-content/uploads/sites/2/2019/05/Control-Engineering-2019-Career-and-Salary-Study.pdf [bare URL PDF]
  9. ^ Tan, K.C.; Li, Y. (2001). "Performance-based control system design automation via evolutionary computing" (PDF). Engineering Applications of Artificial Intelligence. 14 (4): 473–486. doi:10.1016/S0952-1976(01)00023-9.
  10. ^ Li, Yun; Ang, Kiam Heong; Chong, Gregory C. Y.; Feng, Wenyuan; Tan, Kay Chen; Kashiwagi, Hiroshi (2004). "CAutoCSD-evolutionary search and optimisation enabled computer automated control system design" (PDF). International Journal of Automation and Computing. 1: 76–88. doi:10.1007/s11633-004-0076-8. S2CID 55417415.
  11. ^ Rieger, Craig G.; Gertman, David I.; McQueen, Miles. A. (2009). "Resilient control systems: Next generation design research". 2009 2nd Conference on Human System Interactions. pp. 632–636. doi:10.1109/HSI.2009.5091051. ISBN 978-1-4244-3959-1. S2CID 6603922.

Further reading

  • Christopher Kilian (2005). Modern Control Technology. Thompson Delmar Learning. ISBN 978-1-4018-5806-3.
  • Bennett, Stuart (June 1986). A history of control engineering, 1800-1930. IET. ISBN 978-0-86341-047-5.
  • Bennett, Stuart (1993). A history of control engineering, 1930-1955. IET. ISBN 978-0-86341-299-8.
  • Arnold Zankl (2006). Milestones in Automation: From the Transistor to the Digital Factory. Wiley-VCH. ISBN 978-3-89578-259-6.
  • Franklin, Gene F.; Powell, J. David; Emami-Naeini, Abbas (2014). Feedback control of dynamic systems (7th ed.). Stanford Cali. U.S.: Pearson. p. 880. ISBN 9780133496598.
Wikibooks has a book on the topic of: Control Systems
Wikimedia Commons has media related to Control engineering.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Control_engineering&oldid=1123665400"