|This article relies on references to primary sources. (November 2012)|
The Omnibot is a toy robot originally manufactured by Tomy in the mid-1980s. The name then came to apply to the successful line of robots manufactured by the company. The initial Omnibot was announced with expectations of restoring popular interest in robots, at a time when it was becoming obvious that robots with advanced AI such as R2-D2 were still a long way away. A more advanced version of the Omnibot was called the Omnibot 2000 and did not have a plastic bubble over its head. With the success of the Omnibots, the Omnibot range quickly expanded. After the North American video game crash of 1983 and its debilitating effect on the entire nascent home electronics industry, the Omnibot faded away but it was revived in the early 2000s. The latest version of the Omnibot is the i-SOBOT,".
Both the Omnibot and the more advanced Omnibot 2000 had a cassette tape player built into the chest area of the robot, which slid out like a drawer to reveal the cassette and could record and playback sequences of commands, as well as regular audio recordings. The built in digital clock with timers and alarms allowed the playback of movement recordings at specified times, such as moving into the bedroom in the morning. Both robots were able to broadcast speech from the remote control handset through a speaker on the robot, and both were shipped with a cardboard "home" base which was suggested to be taped to the floor and used as a reference point for programming.
Both Omnibot and the Omnibot 2000 could carry light objects. The Omnibot carried a specially made tray which slotted into its claws, and the Omnibot 2000 had a tray which slotted into its motorised 'accessory panel', allowing the tray to revolve cups and glasses into the reach of the arm.
The Omnibot 2000 was 25 inches tall, powered by a 6-Volt lead–acid battery and two AA batteries. Its right arm was controllable. The user could control its shoulder, elbow, wrist and fingers, the left arm being a poseable "dummy".
Unfortunately, losing the remote control unit for an Omnibot meant that the robot could no longer be used.
Two lesser known robots in the Omnibot range were the Omnibot OOM and the Omniwagon. The Omnibot OOM was shaped like a standard Omnibot except with the addition of a spherical head, its remote controller including a basic form of voice-control. The Omniwagon was merely a remote controlled drive unit and wheels from an omnibot with a flat surface on top to carry objects.
 Related Robots
 Omnibot OOM / Hearoid
The Omnibot OOM (later released in North America as the "Hearoid") was closely based on the standard Omnibot. Changes included a more anthropomorphic head design, remotely controlled light-up eyes that acted rather like headlights, and a more sophisticated remote controller that included primitive voice control.
 Robie Sr.
Radio Shack retailed a version of the Omnibot named the Robie Sr.. Made by Tomy in Japan, these were essentially a standard Omnibot, but with the dome-shaped head replaced by the more anthropomorphic head of the Omnibot OOM / Hearoid.
 Omnibot Jr. "Charmmy"/Robie Jr.
The Omnibot Jr., also known as the "Charmmy", was a 10.5 inches tall remote controlled robot with an attachable tray, featuring styling reminiscent of the original Omnibot. Simultaneously released by Radio Shack as the Robie Jr., Omnibot Jr. included a microphone on either side of the robot's head that allowed it to hear an ultrasonic sound emitted by the remote controller. The dual microphones allowed Charmmy to determine the rough direction of the controller, and navigate to its location - sometimes even around corners. The Omnibot Jr. was also equipped with a bump sensor that allowed it to navigate around objects, and this sensor was also used along with sensors in the arms to trigger several recorded announcements should the robot bump into an object or an item be placed on the tray.
The classic Omnibot had a cheaper, smaller cousin known as the Verbot, known in its native Japan as the KI*KU*ZO. It was somewhat similar to the Omnibot in appearance but was much more limited in features. The Verbot also came with a remote control. Verbot was able to pick up small objects, a feature many toy robots of the era lacked. Disadvantages common to the Verbot were that it was quite noisy, reprogramming was necessary every time the robot was powered up again, and as with all of the Omnibot series its white plastic body would turn yellow if left in the sun. The Verbot was actually quite complex, utilizing a single motor for all its movements and an intricate set of gears for picking up objects. Programming Verbot was accomplished by pushing one of the buttons on its front panel and holding it down while the corresponding action was spoken into the remote control's microphone and then releasing the button. As with most Omnibots, losing the remote meant the robot could not be used to full capacity, but some hobbyists have modified cheap 1980s walkie-talkies for inputting voice commands.
 In popular media
- An Omnibot with modded leg extensions appears in The Night They Saved Christmas (1984).
- An Omnibot named "Melvin" was the co-host of the Australian children's version of the game show Now You See It.
- An Omnibot 2000 can be seen in music video "Let's Go to the Mall" on the television show How I Met Your Mother as well as in the follow-up Robin Sparkles episodes "Sandcastles in the Sand" and "Glitter".
- An Omnibot is featured in the Christmas episode of "It's Always Sunny in Philadelphia" titled "A Very Sunny Christmas" as a "gift" for Mac stolen by his family at Christmas time.
- An Omnibot 2000-like robot appears as the character "80s Robot" in the film The Muppets, released in 2011.
- An Omnibot is a featured item for sale in "Auction Kings"
 Omnibots today
In recent times, many hobbyists have turned to hacking, tweaking and improving their Omnibots. Commonly added features are IR Sensors, video cameras, speech recognition chips, stronger motors, microcontrollers, sonars and other advanced enhancements that would not have been possible in the 80s.
In the early 2000s, a gutted Omnibot was used as part of a contestant on the US television show Battlebots. The robot, named Dr. Inferno Jr. (an updated version of another combat robot that used a gutted Omnibot) won several awards in the competition's "Lightweight Division". The Omnibot on top of the drivetrain had no dome on top, and its arms were replaced with twin saws.
|This article does not cite any references or sources. (October 2009)|
In 2006, shortly after the merger of Tomy and Takara, the company first unveiled a prototype for a new Omnibot, initially called "Omnibot 2007: i-SOBOT" but which has since been officially named, "Omnibot 17μ: i-SOBOT." ("μ" is the Greek letter "mu" symbolizing micron, referring to the specs of the servo motors) in Japan and simply "i-SOBOT" in the U.S. market. i-SOBOT is scheduled to go on sale in Japan in October 2007 (Japanese language with blue and white color), but an English language, black and grey version went on sale first in the U.S., in September, 2007. Reportedly, a European version will go on the market in 2008.
i-SOBOT, which has been certified by Guinness World Records as "the world's smallest humanoid robot in production" is equipped with 17 proprietary servo-motors and can be controlled by an IR remote controller and also via voice commands. It is copapable of speaking hundreds of words and phrases and has nearly 200 pre-programmed actions, plus allows additional programming by the user via the remote control. The retail price is approximately ¥30,000 in Japan and $350 in the U.S. i-SOBOT is fully bi-pedal. In 2013 the new robot i-SODOG will come out from Tomy.
 See also
|Wikimedia Commons has media related to: Omnibot|