||It has been suggested that this article be merged with Carrier-to-noise ratio. (Discuss) Proposed since September 2013.|
In information theory and telecommunication engineering, the signal-to-interference-plus-noise ratio (SINR) (also known as the signal-to-noise-plus-interference ratio (SNIR)) is a quantity used to give theoretical upper bounds on channel capacity (or the rate of information transfer) in wireless communication systems such as networks. Analogous to the SNR used often in wired communications systems, the SINR is defined as the power of a certain signal of interest divided by the sum of the interference power (from all the other interfering signals) and the power of some background noise. If the power of noise term is zero, then the SINR reduces to the signal-to-interference ratio (SIR). Conversely, zero interference reduces the SINR to the signal-to-noise ratio (SNR), which is used less often when developing mathematical models of wireless networks such as cellular networks.
The complexity and randomness of certain types of wireless networks and signal propagation has motivated the use of stochastic geometry models in order to model the SINR, particularly for cellular or mobile phone networks.
SINR is commonly used in wireless communication as a way to measure the quality of wireless connections. Typically, the energy of a signal fades with distance, which is referred to as a path loss in wireless networks. Conversely, in wired networks the existence of a wired path between the sender or transmitter and the receiver determines the correct reception of data. In a wireless network ones has to take other factors into account (e.g. the background noise, interfering strength of other simultaneous transmission). The concept of SINR attempts to create a representation of this aspect.
The definition of SINR is usually defined for a particular receiver (or user). In particular, for a receiver located at some point x in space (usually, on the plane), then its corresponding SINR given by
where P is the power of the incoming signal of interest, I is the interference power of the other (interfering) signals in the network, and N is some noise term, which may be a constant or random. Like other ratios in electronic engineering and related fields, the SINR is often expressed in decibels or dB.
To develop a mathematical model for estimating the SINR, a suitable mathematical model is needed to represent the propagation of the incoming signal and the interfering signals. A common model approach is to assume the propagation model consists of a random component and non-random (or deterministic) component.
The deterministic component seeks to capture how a signal decays or attenuates as it travels a medium such as air, which is done by introducing a path-loss or attenuation function. A common choice for the path-loss function is a simple power-law. For example, if a signal travels from point x to point y, then it decays by a factor given by the path-loss function
where the path-loss exponent α>2, and |x-y| denotes the distance between point y of the user and the signal source at point x. Although this model suffers from a singularity (when x=y), its simple nature results in it often being used due to the relatively tractable models it gives. Exponential functions are sometimes used to model fast decaying signals.
The random component of the model entails representing multipath fading of the signal, which is caused by signals colliding with and reflecting off various obstacles such as buildings. This is incorporated into the model by introducing a random variable with some probability distribution. The probability distribution is chosen depending on the type of fading model and include Rayleigh, Rician, log-normal shadow (or shadowing), and Nakagami.
The propagation model leads to a model for the SINR. Consider a collection of 'n' base stations located at points x1 to xn in the plane or 3D space. Then for a user located at, say x=0, then the SINR for a signal coming from base station, say, xi, is given by
where Fi are fading random variables of some distribution. The SINR is can be re-written as
which under the simple power-law path-loss model becomes
Stochastic geometry models
In wireless networks, the factors that contribute to the SINR are often random (or appear random) including the signal propagation and the positioning of network transmitters and receivers. Consequently, in recent years this has motivated research in developing tractable stochastic geometry models in order to estimate the SINR in wireless networks. The related field of continuum percolation theory has also been used to derive bounds on the SINR in wireless networks.
- M. Haenggi, J. Andrews, F. Baccelli, O. Dousse, and M. Franceschetti. Stochastic geometry and random graphs for the analysis and design of wireless networks. IEEE JSAC, 27(7):1029--1046, september 2009.
- M. Franceschetti and R. Meester. Random networks for communication: from statistical physics to information systems, volume 24. Cambridge University Press, 2007.
- J. G. Andrews, R. K. Ganti, M. Haenggi, N. Jindal, and S. Weber. A primer on spatial modeling and analysis in wireless networks. Communications Magazine, IEEE, 48(11):156--163, 2010.
- F. Baccelli and B. Blaszczyszyn. Stochastic Geometry and Wireless Networks, Volume I --- Theory, volume 3, No 3--4 of Foundations and Trends in Networking. NoW Publishers, 2009.
- F. Baccelli and B. Blaszczyszyn. Stochastic Geometry and Wireless Networks, Volume II --- Applications, volume 4, No 1--2 of Foundations and Trends in Networking. NoW Publishers, 2009.
- R. Meester. Continuum percolation, volume 119. Cambridge University Press, 1996.