Sarod: Difference between revisions
clean up the lead |
No edit summary |
||
Line 55: | Line 55: | ||
*{{col 1}} |
*{{col 1}} |
||
*[[Bidyut Khan]] |
*[[Bidyut Khan]] |
||
*[[Aniruddha Andrew Vasant Rai]] |
|||
*[[Anupam Shobhakar]] |
*[[Anupam Shobhakar]] |
||
*[[Apratim Majumdar]] |
*[[Apratim Majumdar]] |
Revision as of 20:53, 8 October 2007
The sarod or sarode (Hindi:सरोद, Bengali: সরোদ) is a string musical instrument, used mainly in Indian classical music. Along with the sitar, it is the most popular and prominent instrument in Hindusthani classical. The sarod is known for a deep, weighty, introspective sound (contrast with the sweet, extremely rich texture of the sitar). The tonal quality somewhat resembles the classical guitar, particularly at the lower notes, though in the higher ranges the sound is less rich than the guitar. It is a fretless instrument like almost all other Indian instruments, since Indian music depends extensively (in some cases almost entirely) on continuous slides between notes, known as meend (glissando).
Some of the most well-known sarod players are Allauddin Khan (universally considered the greatest classical music teacher of modern times), Ali Akbar Khan and Amjad Ali Khan.
Origins
Many scholarly and anecdotal accounts consider the ancestral source of the sarod to be the rebab, a similar instrument originating in Afghanistan and Kashmir. The sarod is essentially a bass rebab.[1] The rebab was modified by Amir Khusru in the 13th century. Dr Lalmani Misra opines in his Bharatiya Sangeet Vadya that the sarod is an amalgamation of the ancient chitra veena, the medieval rebab and modern sursingar.
However, there are speculations among the sarod community, notably from Ali Akbar Khan, that a similar instrument might have existed almost two thousand years ago in ancient India. They refer to instruments which resemble the sarod found in carvings of the 1st century in the Champa temple, as well as in paintings in the Ajanta Caves.
Amjad Ali Khan’s ancestor Mohammad Hashmi Khan Bangash, a musician and horsetrader, who came to India with the Afghan rebab in the mid-1700s and became a court musician to the Maharajah of Rewa (now in Madhya Pradesh). It was his descendants, and notably his grandson Ghulam Ali Khan Bangash who became a court musician in Gwalior, who gradually transformed the rabab into the sarod we know today.[2]. A parallel, but equally credible theory credits descendants of Madar Khan (1701-1748), and Niyamatullah Khan in particular, with the same innovation circa 1820. It is possible that Ghulam Ali Khan and Niyamatullah Khan came to the similar design propositions either independently or in unacknowledged collaboration. The sarod in its present recognizable form dates back to c.1820, when it started gaining recognition as a serious instrument in Rewa, Shahjahanpur, Gwalior and Lucknow. In the twentieth century, the sarod received some finishing touches from Allauddin Khan, the performer-pedagogue from Maihar best known as Ravi Shankar's guru. None of the three theories of the origin of the Sarod have credible historic documentation, and are more speculative than concrete theories.
Design
The design of the instrument depends on the school (gharana) of playing. There are three distinguishable types, discussed below.
- The conventional sarod is an 18 to 19-stringed lute-like instrument — four to five main strings used for playing the melody, one or two drone strings, two chikari strings and ten to eleven sympathetic strings. The design of this early model is generally credited to Niyamatullah Khan of the Lucknow Gharana as well as Ghulam Ali Khan of the Gwalior-Bangash Gharana. Among the contemporary sarod players, this basic design is kept intact by two streams of sarod playing. Amjad Ali Khan and his disciples play this model, as do the followers of Radhika Mohan Maitra. Both Amjad Ali Khan and Buddhadev Dasgupta have introduced minor changes to their respective instruments which have become the design templates for their followers. Both musicians use sarods made of teak wood. Buddhadev Dasgupta prefers a polished stainless steel fingerboard for the ease of maintenance while Amjad Ali Khan uses the conventional chrome or nickel-plated cast steel fingerboard. Visually, the two variants are similar, with six pegs in the main pegbox, two rounded chikari pegs and 11 (Amjad) to 15 (Buddhadev) sympathetic strings. The descendants of Niyamatullah Khan (namely Irfan Khan and Ghulfam Khan) also play similar instruments. The followers of Radhika Mohan Maitra still carry the second resonator on their sarods. Amjad Ali khan and his followers rejected the resonator altogether.
- Another type is that designed by Allauddin Khan and his brother Ayet Ali Khan. This instrument, referred by David Trasoff (Trasoff, 2000) as the 1934 Maihar Prototype, is larger and longer than the conventional instrument, though the fingerboard is identical to the traditional sarod described above. This instrument has 25 strings in all. These include four main strings, four jod strings (tuned to Ni or Dha, R/r, G/g and Sa respectively), two chikari strings (tuned to Sa of the upper octave) and fifteen tarab strings. The main strings are tuned to Ma ("fa"), Sa ("do"), lower Pa ("so") and lower Sa, giving the instrument a range of three octaves. The Maihar sarod lends itself extremely well to the presentation of alap with the four jod strings providing a backdrop that helps usher in the ambience of the raga.
Sarod strings are made either of steel or phosphor bronze. Most contemporary sarod players use Roslau, Schaff or Precision brand music wire. The strings are plucked with a triangular plectrum (java) made of polished coconut shell, ebony, Delrin (TM) or other materials such as bone.
Playing
The lack of frets and the tension of the strings makes it very technically demanding to play, as the strings must be pressed hard against the fingerboard.
There are two schools of sarod playing. One involves using the tip of one's fingernails to stop the strings; certain strength and stiffness of the fingernails is a prerequisite for accuracy of pitch. The other uses a combination of the nail and the fingertip to stop the strings against the fingerboard.[2] The technique which uses the fingernails produces a ringing tone, while the fingertip technique produces a flatter tone.
Well known sarod players
Senior performers
Notes
- ^ Courtney, David. "Sarod". David and Chandrakantha Courtney. Retrieved 2006-12-02.
- ^ a b Broughton, Simon. "Tools of the Trade: Sarod". Retrieved 2006-12-02.