Jump to content

Morris Marina: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
RussBot (talk | contribs)
m Robot-assisted redirect bypass from sedan to sedan (car): disambiguation
Line 60: Line 60:


==Australia==
==Australia==
The Morris Marina, sold there as the '''Leyland Marina''' (in saloon and coupé forms only) instead used the OHC [[BMC E-Series engine|E-Series]] motors, in 1500 cc and 1750 cc forms, the 1750 in two different rates of tune. Additionally, as an ill-advised competitor to the [[Holden Torana]] and [[Ford Cortina]] 6 models, the Marina was also offered with a 121 hp (90 kW) 2600 cc engine.
The Morris Marina, sold there as the '''Leyland Marina''' (in saloon and coupé forms only) instead used the OHC [[BMC E-Series engine|E-Series]] motors, in 1500 cc and 1750 cc forms, the 1750 in two different rates of tune. Additionally, as an ill-advised competitor to the [[Holden Torana]] and [[Ford Cortina]] 6 models, the Marina was also offered with a 121 hp (90 kW) 2600 cc E-series six cylinder engine.


This indigenous Marina variant was capable of 0–60 mph in under nine seconds. The Australian Marinas were built from CKD kits sent from Cowley in England, but used high levels of local content, including different running gear, axle, interiors, seals, seats, uprated dampers and mounts, uprated wheels and a higher grade of fit and finish. The Marina Six used a separate front sub-frame to support the weight of the Big Red engine and different front struts to try and improve handling. Leyland Australia were known for their own development and a version of the Rover V8 was converted into a V6 and test fitted to a Marina saloon, allegedly running in a race at Mt Panorama. A replacement was in development in 1974.
This indigenous Marina variant was capable of 0–60 mph in under nine seconds. The Australian Marinas were built from CKD kits sent from Cowley in England, but used high levels of local content, including different running gear, axle, interiors, seals, seats, uprated dampers and mounts, uprated wheels and a higher grade of fit and finish. The Marina Six used a separate front sub-frame to support the weight of the Big Red engine and different front struts to try and improve handling. Leyland Australia were known for their own development and a version of the Rover V8 was converted into a V6 and test fitted to a Marina saloon, allegedly running in a race at Mt Panorama. A replacement was in development in 1974.

Revision as of 05:10, 5 August 2008

Morris Marina
1976 Morris Marina in England
Overview
ManufacturerBritish Leyland
Production1971–80
DesignerRoy Haynes
Body and chassis
Classmidsize car
Body style4-door saloon
5-door estate car
2 door coupé
2-door pick-up
2-door van
Powertrain
Engine1.3 L A-Series Straight-4
1.8 L B-Series Straight-4 (1971–1978)
1.7 L O-Series Straight-4 (1978–1980)
1.4 L Straight-4 Diesel
1.5 L E-Series Straight-4 (Australia)
1.75 L E-Series Straight-4 (Australia)
2.6 L E-Series Straight-6 (Australia/South Africa)
Dimensions
WheelbaseTemplate:Auto in
LengthTemplate:Auto in
WidthTemplate:Auto in
Chronology
PredecessorMorris Minor
SuccessorMorris Ital
1973 Morris Marina 4-door saloon in England
1973 Morris Marina 2-door coupé. This grill identifies the 1.3 litre version
1976 Morris Marina Estate in England
1971 Morris Marina 1.8 TC 4 door saloon. The 1.8 TC was marketed as the sporting version. The high visibility "safety colour" of this example was fashionable in the 1970s.

The Morris Marina was a car manufactured by the Morris division of British Leyland throughout the 1970s, a period of great turbulence and difficulty for the British car industry. It was known in some markets as the Austin Marina, Leyland Marina, and Morris 1.7.

The model has been widely identified as symptomatic of the problems facing the industry at that time, with poor build quality, handling likened to a "skip on wheels"[1] and outdated design. The 1980 replacement for the Marina, the closely related Ital, received similar criticism. The Marina has been described as one of the worst cars of all time, although it was one of the most popular cars in Britain throughout its production life.[2][3][4][5]

Development

The Marina was developed under the ADO 28 codename. It was in production from 1971 to 1980 and thereafter as the moderately face-lifted Ital until 1984 when the Morris name was consigned to history. In Australia, it was known as the Leyland Marina, in New Zealand as the Morris 1.7 (for 1979–81, in face-lifted O-Series form), and in South Africa and North America as the Austin Marina.

In the early 1970s, BL decided that conservative, traditionally-engineered cars would be released under the Morris name, while more adventurous cars would be released as Austins or even as new marques — such as the Austin Allegro and Leyland Princess. As a result, the Marina was unadventurous, making use of tried and trusted BMC components derived from the Morris Minor and MGB, and using mainly Triumph Dolomite transmission and running gear. Intended as a stop-gap design until new products were ready later in the 1970s, it was designed by Roy Haynes, the same man who designed the Ford Cortina Mark II, with which it shares some stylistic similarities. Roy Haynes attempted to put forward a system that many manufacturers now use, that of the common floor pan shared between models; the Marina was designed to be the first car utilising this idea. It was looked on as too radical by the management of British Leyland and after a short while Triumph designer Harry Webster was drafted in to push the project forward, Roy Haynes soon leaving the company. This protracted development period and the numerous changes made to the design by the various people working on it had a major effect on the Marina. It meant that the Marina (a car intended to be basic and conventional) cost more to develop than the Austin Allegro, its technically and aesthetically advanced stablemate. This is often held up as a prime example of British Leyland's poor project and cost management. The engines were the venerable A-Series and B-Series units in 1.3 and 1.8 litre capacities, respectively, with rear wheels being driven through a live axle. It featured torsion bar suspension at the front and leaf-spring suspension at the rear, and five body styles, saloon, estate, coupé, pickup and van, the estate coming about almost one and a half years later in late 1972. The TC versions were equipped with a twin carburettor engine similar to that found in the MG MGB for extra performance. These could be fitted with a body kit from BL Special Tuning comprising front and rear spoilers, alloy wheels, extra lighting and other details. A 1.5-litre diesel version, using an engine developed from the B-Series, was offered in Europe.

The car was popular with families and undemanding car buyers, and was available in the typical BL colours of the day — brown, beige, dark limeflower green, dark blue and a characteristically 1970s purple. It was intended to be a competitor to the generally similar Ford Cortina (and to some extent the smaller Escort); the Vauxhall Viva and later Vauxhall Cavalier; and the Hillman Avenger and Hunter. It shared its basic styling with all these cars, adopting a 'trans-atlantic' look that took elements of car styling from contemporary American cars (especially the front-end treatment in the Marina's case) and offered them at a scale acceptable to the European market. As with its mechanics, the Marina was not intended to be visually innovative or particularly interesting — its Austin Allegro stablemate was the entry in that area of the market.

BL was beset with problems including industrial action throughout the period, and the Marina was one of a number of models that suffered. While the BL workers gradually eroded their own employment, manufacturers in Europe and Japan introduced innovative designs (such as the VW Golf) that the Marina and its like were never likely to compete with. The problems were compounded as the cars which were to replace the Marina and BL's other mid-size offerings were delayed again and again (eventually appearing as the Austin Maestro and Austin Montego only in 1983/4). By this point, the idea of separate Austin and Morris ranges had been abandoned: there was not enough money to develop a full range of rear-wheel-drive Morris cars and an equivalent front-wheel-drive (FWD) Austin range and FWD was becoming increasingly acceptable across the market.

There were changes however, albeit small ones. A facelift in 1975 gave the Marina new radiator grilles, dashboard, seats, suspension modifications and increased soundproofing. The overhead camshaft O-Series engine (that also was also used for Leyland Princess) appeared in 1.7 litre form in 1978 to replace the larger B-Series 1.8 models. A changed grille, including driving lights, a front spoiler and redesigned bumpers and rear lights were added to all models.

Under severe financial strain, BL was bailed out by the government in the late 1970s, and Sir Michael Edwardes was brought in to oversee the company. Under his leadership, BL made an attempt to update the Marina, by enlisting the help of Giorgetto Giugiaro's ItalDesign. ItalDesign, however, did not design the car, which was an in-house product—it merely productionized it. The result of this exercise, the 1980 Morris Ital features large rear lamp clusters and a new front end, but the 1971 vintage of the design was obvious. The Ital lasted four years and was replaced by the Austin Montego in early 1984, thus bringing to an end use of the Morris name on passenger cars.

Popularity

The car's lack of technical sophistication permitted it to be keenly priced. Despite heavy criticism from the media and motoring press, the Morris Marina was a very popular car in Britain and was among the country's best selling cars throughout its production life, peaking at second place – only surpassed by the Ford Cortina – in 1973. In many ways the car fulfilled its design brief of being an unpretentious, high volume, mass-market car for average-income families and business people.

The purposely simple and 'old-fashioned' design of the Marina was intended mainly to appeal to company car and corporate fleet buyers. This market was dominated by Ford with the Escort and Cortina. BL's Austin products, with their advanced front-wheel drive and suspension systems were more expensive to buy and more costly to maintain, and so suffered poorer sales in these crucial markets. The Marina's front engined, rear-wheel drive, live rear axle layout was identical to the Ford products (and most other mass-production saloons of the day). The Marina did succeed in capturing a larger share of the fleet/hire market from Ford (although the American company remained dominant by a large margin), and this contributed to the Marina's high sales but also its image as a rather dull, 'work-a-day' vehicle.

Marina production lasted almost 10 years, and in that time no less than 807,000 were sold across Britain, though it was less popular on export markets. Whilst intended to be a 'stop gap' design until a more up-to-date replacement could be developed, the problems faced by British Leyland in the mid-to-late 1970s meant that the Marina remained in production essentially unchanged other than some light facelifting and interior changes, as the competition moved ahead. Coupled to the continuing quality problems suffered by the car and the increasingly poor perception of BL cars as a whole, this sealed the Marinas' poor reputation despite its high sales. The relaunching of the then decade-old design as the Morris Ital only added to the image of an outdated, outclassed, and poor-performing vehicle.

A survey conducted by Auto Express magazine in August 2006 revealed that just 745 of the 807,000 Marinas sold in Britain are still on the road — fewer than one in a thousand. This made it officially the most-scrapped car to have been sold in Britain over the previous 30 years.[6][citation needed]

Engines

North America

The Marina was available in the United States as the Austin Marina from 1973–75 in 2- and 4-door form. It was marketed as an Austin because Morris was a virtually unknown brand in the US and to capitalise on the success of the Austin-Healey marque.[citation needed] The 1973 model still had the normal small bumpers, but the 1974/5 models had large bumpers to comply with new US regulations. It was only produced with the 1800 cc engine and was soon strangled by the emissions equipment required by US law, being fitted with an air pump and exhaust air injection. The US Government soon accused BL of "dumping" cars in the US which – combined with tales of poor quality – made it a very poor seller, and they were not exported to the US after 1975.

The Marina was also marketed in Canada as the Austin Marina, in 2-door coupé and 4-door saloon form, from 1973–78, using only the 1800 engine, fitted with US-style heavier bumpers and emissions equipment. Sales stopped when the 1.8 L engine was replaced by the 1.7 L engine, which was not emissions-certified in Canada. While its simple rear-wheel drive layout and mechanicals appealed to many Canadian drivers, the Marina's body was prone to extremely fast rust-out on the salted winter roads of eastern Canada, which limited sales in later years.[citation needed]

Denmark

In Denmark, the Morris Marina name was used for a badge-engineered version of the Morris 1100 in the early- to mid-1960s.

Australia

The Morris Marina, sold there as the Leyland Marina (in saloon and coupé forms only) instead used the OHC E-Series motors, in 1500 cc and 1750 cc forms, the 1750 in two different rates of tune. Additionally, as an ill-advised competitor to the Holden Torana and Ford Cortina 6 models, the Marina was also offered with a 121 hp (90 kW) 2600 cc E-series six cylinder engine.

This indigenous Marina variant was capable of 0–60 mph in under nine seconds. The Australian Marinas were built from CKD kits sent from Cowley in England, but used high levels of local content, including different running gear, axle, interiors, seals, seats, uprated dampers and mounts, uprated wheels and a higher grade of fit and finish. The Marina Six used a separate front sub-frame to support the weight of the Big Red engine and different front struts to try and improve handling. Leyland Australia were known for their own development and a version of the Rover V8 was converted into a V6 and test fitted to a Marina saloon, allegedly running in a race at Mt Panorama. A replacement was in development in 1974. Production of the Marina in Australia was between 1972 and 1974, when Leyland Australia's Zetland factory (home of the Leyland P76) closed.

New Zealand

The Morris Marina was a popular car on the New Zealand market, imported by the New Zealand Motor Corporation. Imports began with built-up British sourced saloons (in 1.3 and 1.8L forms) in 1971, but local assembly of Australian sourced (E-Series engines) models began in 1972 after the release of the Marinas there. In 1974, before the demise of Leyland Australia's manufacturing operations, local assembly switched to British sourced models again in saloon, estate, van and pick-up forms. Batches of fully-built UK-sourced cars also came in in 1973 and 1974 when the government allowed additional import licences due to the inability of local assembly plants to keep pace with demand for new cars.

In 1979 the Marina received a facelift and the BL O-Series OHC 1.7L engine, however at the time the Marina name was perceived as negative by the New Zealand public — hence the Marina name was dropped completely, the car being renamed Morris 1.7. The Morris 1.7 had high equipment levels and included front spoilers and driving lights on all models. The related van and pickup models were renamed Morris 575.

Production of this car ceased in 1981, and the car was replaced locally by an expanded range of NZMC Honda products.

Rallying

In 1970, Donald Stokes ordered the BMC Competitions Department closed and disbanded. By the time the Marina appeared, it was becoming obvious that Stage Rallying was gaining popularity and in early 1971 it was decided to used the new model in the 1971 RAC rally, the following November. Luckily for BL, Special Tuning had a rally driver on its books by the name of Brian Culcheth and so with no team, no mechanics, no funding and initially no sponsorship a team of talented engineers developed a 1.3 Coupe into a rally car, funded purely by sales of performance parts from Special Tuning.

Knowing that the 1.8 engine would be too heavy for the handling, they concentrated on the 1.3 engine and using Mini components got good horsepower figures from it; then they played a flanker to pen the field in the 1.3 classes. All rally teams used one particular course to test, so the car was fitted with a full-race 1.8 and blasted around the track in front of the Ford rally team — consequently they withdrew from the 1.3 class allowing the car to claim 1st in Class for the 1971 Rally.

Subsequently, the car was entered in seventeen more national and international rallies until 1975, either being placed or winning class honours in twelve of them, the others being crashes/failures.

For 1976, BL management decided to move to the Triumph Dolomite Sprint for its main rallying weapon.[citation needed]

In 1974 Foden commissioned a Rover V8-engined Marina to compete in the London-Sahara-Munich rally. This stormed through several stages before suffering rear-axle failure in the desert. The rear axle had been the only part sourced from outside the BL parts bin.

Post-demise

During the early 1970s, George Turnbull was retired from BL and took two Marinas, one saloon and one coupé to a small car producing company in Korea who were interested in developing their own car, instead of making other peoples cast-offs. Hyundai took the Marinas and developed the Hyundai Pony from them, in three and five door variants and a pick-up, kick-starting the company's ascendancy in car manufacturing.[7]

The Marina lived on in many smaller ways: many parts from the Marina were used in other British Leyland vehicles. The door handles from the Marina were utilized in the Austin Allegro, Range Rover, Triumph TR7, and the first series of Land Rover Discovery, until 1998.[8][9] They were also used by some models of the Reliant Scimitar, and by various Lotus cars, including some versions of the Lotus Esprit.[9] The indicator switchgear, also used on the Triumph Stag, eventually became part of the Lamborghini Diablo.[8] Marina-sourced gearboxes were used in the MG Midget.[10]

References

  1. ^ Kennedy, Carol (2003). From Dynasties to Dotcoms: The Rise, Fall and Reinvention of British Business in the Past 100 Years. Kogan Page. p. p. 115. ISBN 0-7494-4127-5. {{cite book}}: |page= has extra text (help)
  2. ^ Fourth, according to "VW Beetle is named 'crappest car'". BBC News. 2004-09-14. Retrieved 2007-07-14.
  3. ^ Wheeler, Brian (2005-04-07). "The politics of building cars". Retrieved 2007-07-14. [T]he cars produced in that era, such as the Austin Allegro and the Morris Marina, are now widely regarded as some of the worst ever built.
  4. ^ Dowling, Joshua (2000-06-30). "First among the worst". Sydney Morning Herald. The failed Morris Marina was a close runner-up [to being the worst car ever sold in Australia].
  5. ^ "Porsche's Cayenne caned". The Sun Online. Retrieved 2007-07-14.
  6. ^ Reuters (2006-09-01). "Marina and Cortina vie for "rarest" car". Retrieved 2007-07-14. {{cite news}}: |author= has generic name (help)
  7. ^ "The Korean Connection". Retrieved 2007-07-14.
  8. ^ a b Bremner, Richard (1995-06-24). "Only £634,500, car included". The Independent. Retrieved 2007-07-14.
  9. ^ a b Brabyn, John. "Range Rover Parts Sources". Retrieved 2007-07-14. The Range Rover door handles are the same as the ones on the Morris Marina and the early 1980s Lotus Esprit Turbo. Very early Range Rovers did not use these door handles, though.
  10. ^ Horler, Terry (2003). Original Sprite & Midget: The Restorer's Guide. MotorBooks. ISBN 0760314497.

See also