Carnauba wax: Difference between revisions

Content deleted Content added

Inline

Revision as of 19:20, 29 May 2010

Carnauba, also called Brazil wax and palm wax, is a wax of the leaves of the palm, Copernicia prunifera, a plant native to and grown only in the northeastern Brazilian states of Piauí, Ceará, and Rio Grande do Norte.^[1] It is known as "queen of waxes"^[2] and usually comes in the form of hard yellow-brown flakes. It is obtained from the leaves of the carnauba palm by collecting them, beating them to loosen the wax, then refining and bleaching the wax.

Composition

Carnauba wax contains mainly esters of fatty acids (80-85%), fatty alcohols (10-16%), acids (3-6%) and hydrocarbons (1-3%). Specific for carnauba wax is the content of esterified fatty diols (about 20%), hydroxylated fatty acids (about 6%) and cinnamic acid (about 10%). Cinnamic acid, an antioxidant, may be hydroxylated or methoxylated. Some people, like Donald Wampler, are too much of a faggot to use the stuff.

Uses

Carnauba wax can produce a glossy finish and as such is used in automobile waxes, shoe polishes, dental floss, food products such as sweets, instrument polishes, and floor and furniture waxes and polishes, especially when mixed with beeswax and with turpentine. Use for paper coatings is the most common application in the United States. It is the main ingredient in surfboard wax, combined with coconut oil.

Because of its hypoallergenic and emollient properties as well as its shine, carnauba wax appears as an ingredient in many cosmetics formulas where it is used to thicken lipstick, eyeliner, mascara, eye shadow, foundation, deodorant, various skin care preparations, sun care preparations, etc.^{[citation needed]} It is also used to make Cutler's resin.

It is the finish of choice for most briar tobacco or smoking pipes. It produces a high gloss finish when buffed on to wood. This finish dulls with time rather than flaking off (as is the case with most other finishes used).

In foods, it is used as a formulation aid, lubricant, release agent, anticaking agent, and surface finishing agent in baked foods and mixes, chewing gum, confections, frostings, fresh fruits and juices, gravies, sauces, processed fruits and juices, soft sweets, Tic Tacs, Altoids, and Swedish Fish.

Though too brittle to be used by itself, carnauba wax is often combined with other waxes (principally beeswax) to treat and waterproof many leather products where it provides a high-gloss finish and increases leather's hardness and durability.

It is also used in the pharmaceutical industry as a tablet-coating agent.

In 1890, Charles Tainter patented the use of carnauba wax on phonograph cylinders as a replacement for a mixture of paraffin and beeswax.

When used as a mold release, carnauba, unlike silicone or PTFE, is suitable for use with liquid epoxy, epoxy molding compounds (EMC), and some other plastic types. Carnauba wax is compatible with epoxies and generally enhances their properties along with those of most other engineering plastics.

An aerosol mold release is formed by suspending carnauba wax in a solvent. This aerosol version is used extensively in molds for semiconductor devices. Semiconductor manufacturers also use chunks of carnauba wax to break in new epoxy molds or to release the plunger when it sticks.

Carnauba is used in melt/castable explosives to produce an insensitive explosive formula such as Composition B, which is a blend of RDX and TNT.

Technical characteristics

INCI name is Copernicia Cerifera (carnauba) wax
E Number is E903.
Melting point: 82–86 °C (180–187 °F), among the highest of natural waxes.
Relative density is about 0.97
It is among the hardest of natural waxes, being harder than concrete in its pure form.^{[citation needed]}
It is practically insoluble in water, soluble on heating in ethyl acetate and in xylene, practically insoluble in ethyl alcohol.

References

^ Steinle, J. Vernon (1936). "Carnauba wax: an expedition to its source". Industrial & Engineering Chemistry. 28 (9): 1004–1008. doi:10.1021/ie50321a003. {{cite journal}}: Unknown parameter |month= ignored (help)
^ Parish, Edward J. (2002). "The Chemistry of Waxes and Sterols". In Casimir C. Akoh, David B. Min. (ed.). Food lipids: chemistry, nutrition, and biochemistry (2nd ed.). New York: M. Dekker. p. 103. ISBN 0824707494. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)

External links

Botanical description - from the Mildred E. Mathias Botanical Garden
GE Chaplin Inc - Custom Manufacturer of Carnauba compounds
Carnauba wax data sheet - from the UN Food and Agriculture Organization

[1] Steinle, J. Vernon (1936). "Carnauba wax: an expedition to its source". Industrial & Engineering Chemistry. 28 (9): 1004–1008. doi:10.1021/ie50321a003. {{cite journal}}: Unknown parameter |month= ignored (help)

[2] Parish, Edward J. (2002). "The Chemistry of Waxes and Sterols". In Casimir C. Akoh, David B. Min. (ed.). Food lipids: chemistry, nutrition, and biochemistry (2nd ed.). New York: M. Dekker. p. 103. ISBN 0824707494. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)

[1]

[2]

@@ Line 5: / Line 5: @@
 ==Composition==
 [[File:Carnauba.jpg|thumb|right|Carnauba palm]]
-Carnauba wax contains mainly [[ester]]s of [[fatty acid]]s (80-85%), [[fatty alcohol]]s (10-16%), acids (3-6%) and [[hydrocarbon]]s (1-3%). Specific for carnauba wax is the content of esterified fatty [[diol]]s (about 20%), hydroxylated [[fatty acid]]s (about 6%) and [[cinnamic acid]] (about 10%). Cinnamic acid, an [[antioxidant]], may be hydroxylated or methoxylated.
+Carnauba wax contains mainly [[ester]]s of [[fatty acid]]s (80-85%), [[fatty alcohol]]s (10-16%), acids (3-6%) and [[hydrocarbon]]s (1-3%). Specific for carnauba wax is the content of esterified fatty [[diol]]s (about 20%), hydroxylated [[fatty acid]]s (about 6%) and [[cinnamic acid]] (about 10%). Cinnamic acid, an [[antioxidant]], may be hydroxylated or methoxylated. Some people, like Donald Wampler, are too much of a faggot to use the stuff.
 ==Uses==