DB Class 10

DB Class 10
Type and origin Builder Krupp Build date 1957 Total produced 2
Specifications Configuration: ​  • Whyte 4-6-2  • UIC 2´C1´ Gauge 1,435 mm (4 ft 8+1⁄2 in) Leading dia. 1,000 mm Driver dia. 2,000 mm Trailing dia. 1,000 mm Length: ​  • Over buffers 26,503 mm Axle load 22.4 t Adhesive weight 64.7 t Service weight 118.9 t Tender type 2'2' T 40 Water cap. 40.0 m² Firebox: ​  • Grate area 4.29 m² Boiler pressure 18 bar Heating surface 216.40 m² Superheater: ​  • Heating area 105.70 m² Cylinder size 480 mm Piston stroke 720 mm Train heating Steam train heating Train brakes Compressed-air brake
Performance figures Maximum speed 160 km/h Indicated power 1,839 kW
Career Numbers DB 10 001–002 Retired 1968

The steam locomotives of DB Class 10 were express train locomotives with the Deutsche Bundesbahn in Germany after the Second World War. They were nicknamed 'Black Swans' ('schwarze Schwäne') as a result of their elegant shape.

History

These newly designed locomotives were built by the firm of Krupp and delivered to the DB in 1957. The two examples of this class were given operating numbers 10 001 and 10 002. They had originally been seen as a replacement for the DRG Class 01 and Class 01.10. However, as a result of their late delivery, high axle load of over 22 tonnes (which restricted its use to only a few routes) and structural changes to rail operations, this plan did not come to fruition. Both engines were designed to greatly reduce maintenance and repair costs. They had a conical smokebox door and partial streamlining which protected the cylinders from dirt and from cooling too rapidly and, at the same time, was supposed to reduce wind resistance. The fully welded boiler was the same as the newly designed one used to re-equip the DRG Class 01.10 from 1953.

The two engines differed initially in their firing. Number 10 001 only had supplementary oil-firing to start with, thus relieving the stoker of up to 30% of his work, but was later converted so that it was fully oil-fired, as 10 002 had been from the outset.

Both vehicles were equipped with a newly designed tender of Class 2'2' T 40.

Locomotives 10 001 and 10 002 were only permitted to work on certain main lines as heavy express steam locomotives due to their axle load of 22 tonnes. Up to 1962 they were allocated to Bebra locomotive depot (Bahnbetriebswerk or Bw), before being transferred to Bw Kassel where they worked alongside the DRG Class 01.10s until 20 March 1967 heading fast-stopping and express trains to and from Gießen. Number 10 001 hauled the E 387/388 (E 687/688) fast-stopping services to and from Münster almost without a break from 21 March 1967 to the beginning of January 1968, and for one month even had special permission to continue as far as Rheine (which part of the route was only cleared for 20 tonne axle loads).

Locomotive 10 002 was retired after a side rod broke in January 1967 and number 10 001 was retired in June 1968.

File:Stamps of Germany (Berlin) 1975, MiNr 491.jpg

1975 stamp

No. 10 001 may be viewed at the German Steam Locomotive Museum (Deutsche Dampflokomotiv-Museum) in Neuenmarkt-Wirsberg. No. 10 002 was scrapped in 1972 at the Offenburg repair shop (Ausbesserungswerk or Aw).

The Class 10 was generally well-liked, especially by the staff at Kassel depot. Contrary to the claim commonly made in the literature that she was prone to damage, her long periods out of service were because spare parts were never available locally, unlike those of the Class 01.

See also

• List of preserved steam locomotives in Germany

Literature

• Jürgen-Ulrich Ebel: Baureihe 10. Die stärkste deutsche Schnellzugdampflok. In: Eisenbahn-Kurier. Nr. 306/Jahrgang 32/1998. EK-Verlag GmbH, ISSN 0170-5288, S. 28-32.
• Jürgen-Ulrich Ebel: "Die Baureihe 10"; EK-Verlag, Freiburg 1998, ISBN 978-3-88255-101-3

External links

• Technical data and photograph
• There is a relevant English-language forum at Railways of Germany