REST
![]() | This article may be too technical for most readers to understand.(October 2020) |
Representational state transfer (REST) is a software architectural style that describes a uniform interface between decoupled components in the Internet in a Client-Server architecture. REST defines a four interface constraints:
- Identification of resources
- Manipulation of resources
- Self-descriptive messages and
- hypermedia as the engine of application state
.[1]. Generally it describes a machine to machine interface and more specifically in web development it allows for an addition or replacement of server-side rendering to assist client-side rendering in web applications as client server model where the web browser acts as the client.
REST has been employed throughout the software industry and is a widely accepted set of guidelines for creating stateless, reliable web APIs. A web API that obeys the REST constraints is informally described as RESTful. RESTful web APIs are typically loosely based on HTTP methods to access resources via URL-encoded parameters and the use of JSON or XML to transmit data.
"Web resources" were first defined on the World Wide Web as documents or files identified by their URLs. Today, the definition is much more generic and abstract and includes every thing, entity, or action that can be identified, named, addressed, handled, or performed in any way on the Web. In a RESTful Web service, requests made to a resource's URI elicit a response with a payload formatted in HTML, XML, JSON, or some other format. For example, the response can confirm that the resource state has been changed. The response can also include hypertext links to related resources. The most common protocol for these requests and responses is HTTP. It provides operations (HTTP methods) such as OPTIONS, GET, POST, PUT, PATCH and DELETE.[2][3] By using a stateless protocol and standard operations, RESTful systems aim for fast performance, reliability, and the ability to grow by reusing components that can be managed and updated without affecting the system as a whole, even while it is running.
The goal of REST is to increase performance, scalability, simplicity, modifiability, visibility, portability, and reliability. This is achieved through following REST principles such as a client–server architecture, statelessness, cacheability, use of a layered system, support for code on demand, and using a uniform interface. These principles must be followed for the system to be classified as RESTful.
Etymology
The term representational state transfer was introduced and defined in 2000 by Roy Fielding in his doctoral dissertation.[1][4] The term is intended to evoke an image of how a well-designed Web application behaves: it is a network of Web resources (a virtual state machine) where the user advances through the application by selecting links (e.g. http://www.example.com/articles/21), resulting in the next resource's representation (the next application state) being transferred to the client and rendered for the user.
History
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d9/Roy_Fielding_at_OSCON_2008.jpg/220px-Roy_Fielding_at_OSCON_2008.jpg)
The Web began to enter everyday use in 1993–1994, when websites for general use started to become available.[5] At the time, there was only a fragmented description of the Web’s architecture, and there was pressure in the industry to agree on some standard for the Web interface protocols. For instance, several experimental extensions had been added to the communication protocol (HTTP) to support proxies, and more extensions were being proposed, but there was a need for a formal Web architecture with which to evaluate the impact of these changes.[6]
The W3C and IETF working groups together started work on creating formal descriptions of the Web’s three primary standards: URI, HTTP, and HTML. Roy Fielding was involved in the creation of these standards (specifically HTTP 1.0 and 1.1, and URI), and during the next six years he developed the REST architectural style, testing its constraints on the Web’s protocol standards and using it as a means to define architectural improvements — and to identify architectural mismatches. Fielding defined REST in his 2000 PhD dissertation "Architectural Styles and the Design of Network-based Software Architectures" at UC Irvine.
To create the REST architectural style, Fielding identified the requirements that apply when creating a world-wide network-based application, such as the need for a low entry barrier to enable global adoption. He also surveyed many existing architectural styles for network-based applications, identifying which features are shared with other styles, such as caching and client–server features, and those which are unique to REST, such as the concept of resources. Fielding was trying to both categorise the existing architecture of the current implementation and identify which aspects should be considered central to the behavioural and performance requirements of the Web.
By their nature, architectural styles are independent of any specific implementation, and while REST was created as part of the development of the Web standards, the implementation of the Web does not obey every constraint in the REST architectural style. Mismatches can occur due to ignorance or oversight, but the existence of the REST architectural style means that they can be identified before they become standardised. For example, Fielding identified the embedding of session information in URIs as a violation of the constraints of REST which can negatively affect shared caching and server scalability. HTTP cookies also violated REST constraints because they can become out of sync with the browser's application state, making them unreliable; they also contain opaque data that can be a concern for privacy and security.
Architectural concepts
![An entity-relationship model of the concepts expressed in the REST architectural style.](http://upload.wikimedia.org/wikipedia/commons/thumb/8/83/REST_information_model.png/600px-REST_information_model.png)
The REST architectural style is designed for network-based applications, specifically client-server applications. But more than that, it is designed for Internet-scale usage, so the coupling between the user agent (client) and the origin server must be as lightweight (loose) as possible to facilitate large-scale adoption. This is achieved by creating a layer of abstraction on the server by defining resources that encapsulate entities (e.g. files) on the server and so hiding the underlying implementation details (file server, database, etc.). But the definition is even more general than that: any information that can be named can be a resource: an image, a database query, a temporal service (e.g. “today’s weather in London”), or even a collection of other resources. This approach allows the greatest interoperability between clients and servers in a long-lived Internet-scale environment which crosses organisational (trust) boundaries.
Clients can only access resources using URIs. In other words, the client requests a resource using a URI and the server responds with a representation of the resource. A representation of a resource is another important concept in REST; to ensure responses can be interpreted by the widest possible number of client applications a representation of the resource is sent in hypertext format. Thus, a resource is manipulated through hypertext representations transferred in messages between the clients and servers.
The strong decoupling of client and server together with the text-based transfer of information using a uniform addressing protocol provided the basis for meeting the requirements of the Web: robustness (anarchic scalability), independent deployment of components, large-grain data transfer, and a low-entry barrier for content readers, content authors and developers alike.
Architectural properties
The constraints of the REST architectural style affect the following architectural properties:[1][7]
- performance in component interactions, which can be the dominant factor in user-perceived performance and network efficiency;[8]
- scalability allowing the support of large numbers of components and interactions among components;
- simplicity of a uniform interface;
- modifiability of components to meet changing needs (even while the application is running);
- visibility of communication between components by service agents;
- portability of components by moving program code with the data;
- reliability in the resistance to failure at the system level in the presence of failures within components, connectors, or data.[8]
Architectural constraints
The REST architectural style defines six guiding constraints.[7][9] When these constraints are applied to the system architecture, it gains desirable non-functional properties, such as performance, scalability, simplicity, modifiability, visibility, portability, and reliability.[1] A system that complies with some or all of these constraints is loosely referred to as RESTful.
The formal REST constraints are as follows:
Client–server architecture
The client-server design pattern enforces the principle of separation of concerns: separating the user interface concerns from the data storage concerns. Portability of the user interface is thus improved. In the case of the Web, a plethora of web browsers have been developed for most platforms without the need for knowledge of any server implementations. Separation also simplifies the server components, improving scalability, but more importantly it allows components to evolve independently (anarchic scalability), which is necessary in an Internet-scale environment that involves multiple organisational domains.
Statelessness
In computing, a stateless protocol is a communications protocol in which no session information is retained by the receiver, usually a server. Relevant session data is sent to the receiver by the client in such a way that every packet of information transferred can be understood in isolation, without context information from previous packets in the session. This property of stateless protocols makes them ideal in high volume applications, increasing performance by removing server load caused by retention of session information.
Cacheability
As on the World Wide Web, clients and intermediaries can cache responses. Responses must, implicitly or explicitly, define themselves as either cacheable or non-cacheable to prevent clients from providing stale or inappropriate data in response to further requests. Well-managed caching partially or completely eliminates some client–server interactions, further improving scalability and performance. The cache can be performed at the client machine in memory or browser cache storage. Additionally cache can be stored in a Content Delivery Network (CDN).
Layered system
A client cannot ordinarily tell whether it is connected directly to the end server or to an intermediary along the way. If a proxy or load balancer is placed between the client and server, it won't affect their communications, and there won't be a need to update the client or server code. Intermediary servers can improve system scalability by enabling load balancing and by providing shared caches. Also, security can be added as a layer on top of the web services, separating business logic from security logic.[10] Adding security as a separate layer enforces security policies. Finally, intermediary servers can call multiple other servers to generate a response to the client.
Code on demand (optional)
Servers can temporarily extend or customize the functionality of a client by transferring executable code: for example, compiled components such as Java applets, or client-side scripts such as JavaScript.
Uniform interface
The uniform interface constraint is fundamental to the design of any RESTful system.[1] It simplifies and decouples the architecture, which enables each part to evolve independently. The four constraints for this uniform interface are:
- Resource identification in requests - Individual resources are identified in requests, for example using URIs in RESTful Web services. The resources themselves are conceptually separate from the representations that are returned to the client. For example, the server could send data from its database as HTML, XML or as JSON—none of which are the server's internal representation.
- Resource manipulation through representations - When a client holds a representation of a resource, including any metadata attached, it has enough information to modify or delete the resource's state.
- Self-descriptive messages - Each message includes enough information to describe how to process the message. For example, which parser to invoke can be specified by a media type.[1]
- Hypermedia as the engine of application state (HATEOAS) - Having accessed an initial URI for the REST application—analogous to a human Web user accessing the home page of a website—a REST client should then be able to use server-provided links dynamically to discover all the available resources it needs. As access proceeds, the server responds with text that includes hyperlinks to other resources that are currently available. There is no need for the client to be hard-coded with information regarding the structure or dynamics of the application.[11]
Classification models
Several models have been developed to help classify REST APIs according to their adherence to various principles of REST design, such as the Richardson Maturity Model.[12]
Applied to web services
Web service APIs that adhere to the REST architectural constraints are called RESTful APIs.[13] HTTP-based RESTful APIs are defined with the following aspects:[14]
- a base URI, such as
http://api.example.com/
; - standard HTTP methods (e.g., GET, POST, PUT, and DELETE);
- a media type that defines state transition data elements (e.g., Atom, microformats, application/vnd.collection+json,[14]: 91–99 etc.). The current representation tells the client how to compose requests for transitions to all the next available application states. This could be as simple as a URI or as complex as a Java applet.[15]
Semantics of HTTP methods
The following table shows how HTTP methods are intended to be used in HTTP APIs, including RESTful ones.
HTTP method | Description |
---|---|
GET[2]: §4.3.1 | Get a representation of the target resource’s state. |
POST[2]: §4.3.3 | Let the target resource process the representation enclosed in the request. |
PUT[2]: §4.3.4 | Create or replace the state of the target resource with the state defined by the representation enclosed in the request. |
PATCH[3] | Partially update resource’s state. |
DELETE[2]: §4.3.5 | Delete the target resource’s state. |
OPTION[2]: §4.3.7 | Advertising the available methods. |
The GET method is safe, meaning that applying it to a resource does not result in a state change of the resource (read-only semantics).[2]: §4.2.1 The GET, PUT, and DELETE methods are idempotent, meaning that applying them multiple times to a resource results in the same state change of the resource as applying them once, though the response might differ.[2]: §4.2.2 The GET and POST methods are cacheable, meaning that responses to them are allowed to be stored for future reuse.[2]: §4.2.3
Discussion
Unlike SOAP-based web services, there is no "official" standard for RESTful web APIs. This is because REST is an architectural style, while SOAP is a protocol. REST is not a standard in itself, but RESTful implementations make use of standards, such as HTTP, URI, JSON, and XML. Many developers describe their APIs as being RESTful, even though these APIs do not fulfill all of the architectural constraints described above (especially the uniform interface constraint).[15]
See also
- Clean URL – URL intended to improve the usability of a website
- Content delivery network – Layer in the internet ecosystem addressing bottlenecks
- Domain Application Protocol (DAP)
- List of URI schemes – Namespace identifier assigned by IANA
- Microservices – Collection of loosely coupled services used to build computer applications
- Overview of RESTful API Description Languages
- OpenAPI Specification – A specification for machine-readable interface files
- Open Data Protocol – Open protocol for creating interoperable Web service APIs
- RAML
- RESTful Service Description Language (RSDL)
- Resource-oriented architecture (ROA)
- Resource-oriented computing (ROC)
- Service-oriented architecture (SOA)
- Web-oriented architecture (WOA)
References
- ^ a b c d e f Fielding, Roy Thomas (2000). "Chapter 5: Representational State Transfer (REST)". Architectural Styles and the Design of Network-based Software Architectures (Ph.D.). University of California, Irvine.
- ^ a b c d e f g h i Fielding, Roy (June 2014). "Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content, Section 4". IETF. Internet Engineering Task Force (IETF). RFC 7231. Retrieved 2018-02-14.
- ^ a b Dusseault, Lisa (March 2010). "PATCH Method for HTTP". IETF. Internet Engineering Task Force (IETF). RFC 5789. Retrieved 2022-06-25.
- ^ "Fielding discussing the definition of the REST term". groups.yahoo.com. Archived from the original on November 5, 2015. Retrieved 2017-08-08.
- ^ Couldry, Nick (2012). Media, Society, World: Social Theory and Digital Media Practice. London: Polity Press. p. 2. ISBN 9780745639208.
- ^ Fielding, Roy Thomas (2000). "Chapter 6: Experience and Evaluation". Architectural Styles and the Design of Network-based Software Architectures (Ph.D.). University of California, Irvine.
- ^ a b Erl, Thomas; Carlyle, Benjamin; Pautasso, Cesare; Balasubramanian, Raj (2012). "5.1". SOA with REST: Principles, Patterns & Constraints for Building Enterprise Solutions with REST. Upper Saddle River, New Jersey: Prentice Hall. ISBN 978-0-13-701251-0.
- ^ a b Fielding, Roy Thomas (2000). "Chapter 2: Network-based Application Architectures". Architectural Styles and the Design of Network-based Software Architectures (Ph.D.). University of California, Irvine.
- ^ Richardson, Leonard; Ruby, Sam (2007). RESTful Web Services. Sebastopol, California: O'Reilly Media. ISBN 978-0-596-52926-0.
- ^ Lange, Kenneth (2016). The Little Book on REST Services. Copenhagen. p. 19. Retrieved 18 August 2019.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ "REST HATEOAS". RESTfulAPI.net. 2 June 2018.
- ^ Ivan Salvadori, Frank Siqueira (June 2015). "A Maturity Model for Semantic RESTful Web APIs". Conference: Web Services (ICWS), 2015 IEEE International Conference OnAt: New York - USA – via Researchgate.
- ^ "What is REST API". RESTful API Tutorial. Retrieved 29 September 2016.
- ^ a b Richardson, Leonard; Amundsen, Mike (2013), RESTful Web APIs, O'Reilly Media, ISBN 978-1-449-35806-8
- ^ a b Roy T. Fielding (2008-10-20). "REST APIs must be hypertext driven". roy.gbiv.com. Retrieved 2016-07-06.
Further reading
- Pautasso, Cesare; Wilde, Erik; Alarcon, Rosa (2014), REST: Advanced Research Topics and Practical Applications, Springer, ISBN 9781461492986
- Pautasso, Cesare; Zimmermann, Olaf; Leymann, Frank (April 2008), "RESTful Web Services vs. Big Web Services: Making the Right Architectural Decision", 17th International World Wide Web Conference (WWW2008)
- Ferreira, Otavio (Nov 2009), Semantic Web Services: A RESTful Approach, IADIS, ISBN 978-972-8924-93-5
- Fowler, Martin (2010-03-18). "Richardson Maturity Model: steps towards the glory of REST". martinfowler.com. Retrieved 2017-06-26.