User:Graham.Fountain/sandbox
Triumph TR7 Sprint | |
---|---|
![]() Figure 1: TR7 Sprint | |
Overview | |
Manufacturer | Triumph Motor Company |
Production | 1977 59–61 made[1][2] |
Assembly | Speke, Liverpool, England |
Designer | Harris Mann, Spen King |
Body and chassis | |
Class | Sports car |
Body style | 2-door coupé |
Layout | FR layout |
Related | Triumph TR7 |
Powertrain | |
Engine | 1,998 cc (2.0 L) 16-valve Slant-4 |
Transmission | 5-speed manual |
Dimensions | |
Wheelbase | 85 in (2,159.0 mm) |
Length | 160 in (4,064.0 mm) |
Width | 62 in (1,574.8 mm) |
Height | 50 in (1,270.0 mm) |
Curb weight | 1,083 kg (2,387.6 lb) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/37/TR7_Sprint_engine_bay_left.jpg/290px-TR7_Sprint_engine_bay_left.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/76/TR7_Sprint_engine_bay_right.jpg/290px-TR7_Sprint_engine_bay_right.jpg)
The Triumph TR7 Sprint version of the Triumph TR7 sports car was produced by the Triumph Motor Company then part of British Leyland, in very limited numbers, probably a maximum of 61 in total, from about February to October 1977; where only 3 cars are recorded as being made after early July 1977, all 3 for specific motorshows.[2] It seems that at least 30 of the cars were built on the production line at BL's plant at Speke, Liverpool, but that possibly all of the rest were converted from finished, Speke built, TR7s at BL's plant at Canley, Coventry.[3] It used a 2-litre version of the 4-cylender Triumph slant-four engine, fitted with the 16-valve cylender head from the Triumph Dolomite Sprint, where the similar 2-litre engine gave 127 bhp DIN, but had originally been specified at 135 bhp SAE. This was instead of the TR7 base model's 105 bhp DIN, 8-valve, 2-litre version of the same slant-four engine. As the TR7 abd Sprint engines have almost identicle blocks, this required only a few additional parts not sourced from the TR7 or Dolomite Sprint: Notably the exhaust manifold and connecting exhaust section, a connection plate for the cabin heater, as well as some differences in the throttle cable connection and carburettor mounting. The TR7 Sprints were also fitted with larger front brake calipers, the same as used on the Triumph TR8 that began production at about the same time. Otherwise, apart from the decals, the TR7 Sprints were essentially identical to the TR7 (1977 and 1978) year models in production at that time. "There are a [comparatively] large number of privately built Sprint conversions about... Buyers should beware of this if they are asked a premium price for an alleged 'genuine' TR7 Sprint":[1] The factory produced TR7 Sprints have chassis numbers that are prefixed with letters ACH, with the chassis plates orignally fitted to the left door, just below the latch.
Why BL produced so few TR7 Sprints has been a matter of some debate, since at least most appear to have been built with the intention of being sold, as most were, rather than as development vehicles. However, the 16-valve TR7 was "never a catalogued model (why remains a mystery)".[4] It is, therefore, widely assumed that the TR7 Sprints must have been built as part of a planned 16-valve TR7 production model, which was then cancelled after only these few had been made. Whereas, author and Triumph TR enthusiast Bill Piggott points out a number of issues with the idea of BL's begining the production of a 16 valve TR7 Spint model in 1977, and suggests that, by then, "there was no need for it".[1] Also, engineer and author David Knowles quotes a senior source within BL stating that the model was "wiped out" when the engine intended for it "died"; identifying this engine as the electronic fuel injected (EFI), US emissions compliant, cost-reduced, 16-valve version of the slant-four engine from the Triumph SD2 programme.[3] However, the Triumph SD2 was officially cancelled in the spring of 1975,[5] after BLMC reached the brink of bankruptcy in December 1974, was effectively nationalized, and its model and engine lines rationalized.[6][7] It is also noted that the TR8, the relatively low production, uprated version of the TR7 that actually was a catalogued model in the US, needed to use the Rover V8 engine from the much larger production Rover SD1.[8][3][1]
Nevertheless, in 1977, BL still needed at least 50 TR7s fitted with Dolomite Sprint 16-valve engines, and suitable for sale. That was because, "[e]ffective from the end of 1977, the FIA banned alternative heads" from competition,[9][10] including the 16-valve Dolomite Sprint head on the Group 4 TR7 rally car,[11] and changed the rules for re-homologating them for continued use, from only requiring 100 kits of parts to be made available for sale, to needing actual production of cars fitted with the alternative heads.[10] The FIA also required such 'homologation specials' to be "meant for the normal sale", i.e. "distribution of cars to individual purchasers", and have published documentation for the model variant.[12][13] A second FIA homologation approval of the 16-valve Dolomite Sprint head for the Group 4 TR7 was then granted on 1 Feb. 1978;[11] where similar approvals are known to have been given on production of 50 cars.[14][15] This second approval for the 16-valve head was in time for the 16-valve TR7 to be used in competition several times in 1978, i.e. after the effective date of the ban, before its replacement, the TR7V8/TR8, was finally homologated in April 1978.[16] A set of 6 pictures in the BMIHT archives of one of the TR7 Sprints have the title "TR7 Sprint Homologation" and are dated 1 Nov. 1977.[17] BL then immediately began to dispose of the TR7 Sprints with the LHD cars being exported for sale in Europe on 2 Nov. 1977,[18] and, from 9 Nov. 1977, the majority of the RHD cars being transferred from Sales and Marketing to Power Train and Foundry Division, identified as the "Selling dealer".[19]
Technical specification
Engine: Triumph Slant Four 1,998cc 16 valve
Capacity: 1998 cc
Valves: 16
Compression ratio: 9.5:1[20]
Fuel system: Twin 1¾" choke SU HS6 carburettors[20]
Maximum Power: 127 bhp @ 5200 rpm (estimated)[20][note 1]
Maximum Torque: 122 lb ft @ 4500 rpm (estimated)[20][note 1]
Performance Data
0–60 mph: 8.5 seconds (estimated)[20]
Max speed: 120 mph (estimated)[20]
The improvements in the 0–60 time and top speed over the TR7's 9.6 seconds and 111 mph are not huge.[21] However, the figures for the 16 valve version of the TR7 are almost identical to those for the US specification carburettor version of the 3.5 litre 135 bhp V8 TR8,[1] which are 120 mph and 8.4 seconds.[22] Also, one of the then Triumph engine development engineers is quoted as saying "The real test was the 30–50, 50–70 [mph] times and here the Sprint was significantly superior to the 2V [2 valves per cylinder] engine and even challenged the TR8's abilities. Certainly, if we were going 'off site' the preferred vehicle to 'borrow' was a Sprint TR7 over all others and that includes the TR8."[3]
Also, The Sprint not only had more torque and power than the TR7, but peak values significantly higher in the rev range - presumably leading to a significant improved driver experience and the preference for this vehicle mentioned above. However, the production TR7 Sprints retained the gearbox and 3.9:1 final drive ratios of the TR7; where a number of converters of TR7s to TR7 Sprints suggests it benefits significantly from the use of the 6-cylender SD1's 3.45:1 final drive or, with tuned engines, even the SD1 3500 or TR8 3.09:1 ratio (which all fit the 5-speed TR7 axle). Hence, given a change in ratio, even to an available alternative value, the resulting figures might have been an even bigger improvement over the TR7's.
Further, despite being specified at 127 bhp, Spen King related "how he went away on holiday and came back to find an engine running on the bed giving 150 bhp at the first build."[23] This would be very close to the 153 PS DIN (±5%)[24] that was given by the Rover V8 engine in the UK Specification TR8 (and higher in the rev range).[1] Hence, it is possible that had Triumph produced the TR7 Sprint and TR8 to UK specification, as was apparently planned at one time,[3][25] there likely would have been significant debate of their relative merits.
Production details
According to the British Motor Industry Heritage Trust (BMIHT) archives at the British Motor Museum, Gaydon, there are production records for chassis numbers ACH/4 to ACH/25, and ACH/00501 to ACH/00535 and ACH/00700: 58 cars.[2][note 2] Also, ACH 1 is identified by the TR Drivers Club, as UK registration WAC 274S, and that ACH 2 and ACH 3 existed might have been inferred from this: "One [unattributed] source states that there were three batches of Sprints, ACH 1 to ACH 25, ACH 501 to ACH 536 and ACH 700 on its own, a total of 62 vehicles."[1] However, following a requested search of the BMIHT records it was discovered that "the build records we have for ACH/000535 cover 4 separate sheets and there is no record or build card for chassis number 536 as the next vehicle is chassis number 700."[26]
While the 'A' in the ACH prefix to the commissioning numbers indicate that the factory TR7 Sprints were built at Speke, a Triumph engine development engineer is quoted as saying "Some if not all of these cars were definitely converted at Canley from 8-valve to 16-valve". The reason given for this is that "the Speke unions wanted added bonuses for dealing with 'non-standard' cars."[3] However, at least some were built on the production line at Speke: another Triumph employee, responsible for engineering liaison between Speke and Canley, is quoted as saying that "At the changeover in July 1977 (to the new common underframe) we built a batch of thirty TR7 Sprints."[3]
What production records there are at the BMIHT do not provide registration details from which cars might be traced; however, some further details of the cars known to have been produced are provided by the TR Drivers Club.([1]) The TR Drivers Club website gives details for only two of the first group of 25 chassis numbers: what was presumably the first prototype, WAC 274S, and one other, WAC 253S. Both known cars from this group were registered in Coventry in September 1977.[19] It is suggested that most of the other cars in this batch were LHD and sold abroad.[1] According to an inspection of the BMIHT archives, of the cars in this batch of 25 chassis numbers, at least were 11 LHD (some records have been lost) and 3 were UK specification - the remaining 11 are 'unknown' but assumed to be LHD.[2][3]
The second batch of chassis numbers begin at ACH/00501. The addition of two leading zeros to this second group of chassis numbers to make them five digits,[note 2] the same length as production TR7's chassis numbers, may indicate these were pre-production cars, not prototypes. However, the differences in where and by which division of BL they were registered (from their (V55) registration documents), indicates that they may still not have been manufactured as a single batch. Hence, it is possible that the press garage (SJW) cars were the "batch of thirty TR7 Sprints" built at "the changeover in July 1977", and the cars in the first group, and possibly some of the second, may have been those built as 8-valve cars at Speke, and converted to 16-valve at Canley.
The first two cars of the second group of chassis numbers were both white, and registered in Coventry as VVC 696S and VVC 697S in August 1977.[19] These were, according to an owner written article in the TR Driver's Club Magazine from 1991,([2]) used for reliability testing. While there are no reliable details for BL's use of these actual cars, according to one source the procedure used with the TR7 and TR8 was to run a test car on the Belgian pavé track at MIRA for 1000 miles, "effectively providing wear harder than a vehicle might experience in a lifetime of normal use". The same source also states that "A related assessment exercise for the TR7 was the '90 day corrosion test', for which a prototype was built without the usual zinc primer or anti-corrosion treatments and the body painted white, the best colour to show up any rust streaks." A Triumph engineer is quoted as saying, "this prototype was run around a variety of road surfaces under wet conditions and then the damp areas were checked. The vehicle was then fitted with a series of nozzles which sprayed salt solution into these same areas".[27]
Thirty cars from this second group of chassis numbers were sequentially registered SJW 521S to SJW 550S (see Figure 4) in Birmingham in three groups in November 1977.[19] Most of these cars have"UK PRESS VEHICLE" handwritten in felt-tip pen on their build cards, and it has been claimed that these cars went to the BL press garage at the Canley site, Coventry; presumably for publicity purposes.[28] There are transport stamps on their build records showing they left Speke in mid-July 1977.[2] However, there is no indication to where they were transported, only that they were in the keeping of the Sales and Marketing Dept., Longbridge, when they were registered and transferred to Power Train and Foundry Division, indicated as the "selling dealer" in November 1977.[19] It is also claimed that these cars were stripped and re-trimmed, and possibly also re-sprayed, as would have normally been the case with press cars; and that they would have had their turret tops smoothed over in that case.[3] However, the TR7 Sprint Homologation pictures show no evidence of this work, even though the pictures were taken only days before that car's disposal by Sales and Marketing Dept., and months after its production and departure from Speke in July 1977.[17][19][2] Many of these SJW cars do state on their build record search certificates from the BMIHT that they were for a press release. However, according the BMIHT archive staff, that note is only due to the "UK PRESS VEHICLE" notes on their build cards.
Another car of this second group of chassis numbers was registered in Coventry as ARW 181S in July 1978.[19] According to a letter from the then archivist, reporting the research of the BMIHT records, "This car was originally intended for display at the 1977 [ Daily Express ] Motorfair in Earls Court, London. We can not verify whether it was in fact displayed here."[29] This car was factory fitted with engine CH 2 HE which it still has as of September 2017. It seems that the last car built in October 1977, ACH/00700, was also intended for a motorshow in Scotland. However, again, it is not known if it was actually used for that.
Distinguishing features
"There are a [comparatively] large number of privately built Sprint conversions about... Buyers should beware of this if they are asked a premium price for an alleged 'genuine' TR7 Sprint":[1] all the essential parts to turn a TR7 into a functional copy of a TR7 Sprint, though not an identical one, can either be sourced from a Dolomite Sprint or remain available from suppliers; several companies sell conversion kits online; and several sources provide information and advice on this TR7 Sprint conversion.[30][31] One of which states, "this upgrade brings you into the same power band as an original TR8, but for a fraction of the cost, effort and time."[30] There are also a number of websites dedicated to the Sprint and Sprint conversions, ([3][4][5][6]) and at least one forum.[7]
It seems that there is no disagreement that "[a]ll [factory TR7 Sprint] cars were fixed-head coupes",[1] that the period over which they were built spans the changeover between the 1977 and 1978 year models,[note 3] and both right and left hand drive cars were produced.[1][3] Those TR7 Sprints that are known were fitted with the 5-speed gearbox mated to the 3.89:1 rear axle that was standard on the 5-speed TR7s. The pre-production cars had the alloy wheels that were optional for later TR7s and standard on Solihull built fixed-heads.[32]
Engine and interior
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/86/TR7_Sprint_Engine_number.jpg/240px-TR7_Sprint_Engine_number.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fa/TR7_Sprint_Engine_Information_Panel%2C_UKC_8605.jpg/240px-TR7_Sprint_Engine_Information_Panel%2C_UKC_8605.jpg)
The factory produced TR7 Sprints have chassis numbers that are prefixed with letters ACH; whereas, UK/Australian/European specification TR7s of the time were prefixed ACG:[1][3] Figure 5 shows a chassis or commissioning plate from a TR7 Sprint car, mounted on the left-hand door, below the door lock. The TR7 Sprint engines are also prefixed with CH, rather than GC on the TR7's and VA on Dolomite Sprint engines; however, the TR7 Sprint engine numbers can, at least in some cases, be very hard to read (see Figure 6).
There are a number of auxiliary engine parts specific to the TR7 Sprint, and not used on the Dolomite Sprint engine: the cast steel exhaust manifold (RKC2788),[1] the front pipe of the exhaust system (which has been remanufactured, RB7385), and a water transfer plate at the back of the cylinder head (also remanufactured, RB7240).
A number of parts in the throttle linkage are also unique to the TR7 Sprint, most obviously the (unused) air-conditioning full-throttle cut-off switch mounting plate between the two carburettors (just visible in Figure 2, and partially obscuring the inlet manifold in Figure 3), which was not fitted to the Dolomite Sprint; and the throttle lever/link rod (visible just over the air box in Figure 3), which looks the same as the TR7 part, but is longer to allow for the carbs being further apart.
The front disks were specific to the TR7 Sprint, although the callipers and dust shields, etc., were as those used on the TR8;[1] so TR8 disks fit.
There are also at least two different Engine information panels (UKC 8605 and TKC 5228), on the underside of the bonnet, some of which only indicate TR7, but provide slightly different information to that on the equivalent TR7 part (UKC 6246).
There are online photographs of some of these parts.([8])
At least some of the cars were fitted with the large semi-circular pad on the steering wheel from the US specification TR7 (RKC82) (see Figure 7).
There is one unsupported claim that "Having a higher-revving engine, the Sprint received a recalibrated rev counter".[1] However, this is incorrect: both engines had a rev limit of 6500 rpm indicated on the rev counter, though both owners' manuals give the "Maximum recommended engine speed (intermittent)" as 6,000 rpm.[33][34] Hence, the TR7 and TR7 Sprint shared a common rev counter.
Exterior
It appears that the exterior of the pre-production TR7 Sprints was, and presumably the production cars would have been, indistinguishable from the TR7 of the day, apart from the decals and side stripes. However, it is reported that a number of different decal sets were being tried out on the prototype cars.[1][3]
There are a number of published photographs of TR7 Sprints bearing decals simply comprising the word "SPRINT" on the front panel and boot lid below the 'TR7' decal of Speke built TR7s,[1][3][8] and described as "The logo that appeared on the boot lid of most of the few TR7 Sprints that escaped from the factory."[1] These used the same font as the TR7 decal applied to Speke built TR7s and in the side stripes used later on the TR7 Premium edition. There is also a description of a car "with the word 'Sprint' written large on the right of the boot lid, the TR7 decal being on the left".[1] However, none of these photographs can be identified to cars that had not been owner modified. Whereas, these decals form part of the set displayed on the FHC TR8 shown in the TR8's homologation papers (FIA #654), identifying it as a "Sprint TR7 V8". These Sprint decals were at one time available (in three sizes) from Moss Europe (previously TriumphTune), though they were not catalogue items or identified to a BL part number or numbers.[35] One size is still available as supplier part No. RB7206BLACK/SILVER/GOLD.
There is also a published photograph of what appears to be a US Spec., 1977 year model car carrying side stripes with the word "Sprint" on the rear wings, the caption to which states "The sides of the TR7 Sprint were supposed to have received this striping treatment, designed by John Ashford, had the car gone into production."[3] These stripes were later reworked for the TR7 Premium edition after the TR7 Sprint was still born.[3] These side stripes were, at one time, listed by Moss Europe under BL part numbers YKC2082-2087.[35] They are also shown in a series of 6 "TR7 Sprint Homologation" photographs in the BMIHT Film and Picture Library, taken on 1 November 1977 before the car was sold-off by BL.[17] The car in these photographs from the BMIHT does not carry the "SPRINT" decals, described above, on either boot lid or front panel. The TR7 Sprint shown in figures 1 and 8 is, in this respect, identical with these photographs, except for the colours.
Publications
The BL TR7 Repair Operations Manual, AKM3079A, covers both the 4 and 2 valve (per cylinder) engines; however, an erratum stuck to the title page states "At the time of going to press the 4 valve engine referred to in this manual has not been fitted to the Triumph TR7".[36]
An owner's handbook, AKM 3967, was also produced for TR7 Sprint in 1977, but is apparently for the 1977 year model: it shows the interior light in the headlining not the doors. Also some of the information is incorrect for the TR7 Sprint, i.e. pictures show the 8 valve engine and the TR7's AC Delco distributor. However, it also lists only the 5 speed (LT77) gearbox, unlike the similar handbook for the TR7, RTC 9210, which lists the 4 speed, and the 5 speed as an option.[33]
The FIA's 1976 rules for homologation, which applied to the re-homologation of the 16-valve head for the group 4 TR7 rally car, approved in February 1978, state that in "checking of a model of car against its recognition form" the scrutineers may refer to "the maintenance booklet published for the use of the make's distributors". These two documents may have been intended to fulfil such a requirement, since the handbook is not intended for the distributor and the ROM is not well described as a booklet.[37][11]
Motorsports
The TR7s used by BL in Group 4 rallying, from their advent in the Welsh rally of 1976 to the Circuit of Ireland in 1978, also used (tuned) 16-valve 2 litre Sprint engines, which by 1977 was rated at "rated at 225 bhp at 8000 rpm".[16] These 16-valve TR7 rally cars proved competitive on asphalt, winning a number of events including the Belgian Boucles de Spa rally in 1977.[16] They were replaced by the Rover V8 3.5 litre engined TR7V8.[note 4]
Four of the later BL works rally cars carried the registrations of cars from the press garage, SJW 533S, SJW 540S, SJW 546S, and SJW 548S. SJW 533S was initially campaigned as a 4 cylinder 16 valve car, and later as a V8 3.5 Litre TR7V8 specification. The other three were only ever campaigned as TR8s.[citation needed] However, it is not clear whether or not the four rally cars bearing these registrations actually were, in any real sense, the TR7 Sprints from the press garage, or whether only the registrations were used. There is a story at one TR7 related website ([9]), and already current in the 1980s, that John Davenport, "needed white cars without sunrooves [sic] and these were the nearest four." However, Bill Price wrote "As I think is known, four of the [TR7] Sprint press release car registration numbers were 'inherited' by BL Motorsport and used to identify four TR7 V8 'works' rally cars."[38] Also, according to the press garage data (Figure 4), SJW 533S was russet, SJW 540S was java green, SJW 546S was brooklands green, and SJW 548S was carmine; though none had sun-roofs. While there are suggestions that the cars sent to the press garage were re-trimmed and even possibly re-sprayed,[3] there are no suggestions that their paint colours were changed, and the competitions department could, presumably, have managed that themselves, were it significant. Equally anecdotally, a more complete reproduction of the 1991 owner written article from the TR Driver's Club magazine states "Although the SJW TR7V8 rally cars began life as TR7 Sprints, the rally cars were scratch built using bodies taken off the line and prepared by Safety Devices. So only the registration numbers from the sprints were used."([10])
Homologation
Initial homologation
There is some confusion over exactly how the TR7 was homologated (for group 4) with the 16 valve engine, close ratio sprint gearbox and overdrive, and heavy duty rear axle before any TR7 Sprints were produced.[39] Rally journalist and historian Graham Robson refers to the "famous 'inventive homologation' skills" of Bill Price, then workshop manager at BL Special Tuning (ST) at Abingdon, and to him "perhaps, taking lessons from Ralph Broad, who was an old hand at the black art of 'reading the rules'", and states that "Bill [Price] managed to gain approval for a TR7 which was only loosely related to the production car." Bill Price himself wrote on this issue "Careful consideration was given to the existing specification with the result that we decided to list the 16-valve Sprint cylinder head to enable us to virtually transplant the Sprint rally engine into the car. The Sprint gearbox was homologated as the 77mm five-speed [LT77] gearbox was not yet available and it would take time to produce close ratio gears for it. The heavy duty axle which would be standard with the five-speed gearbox was also listed [for Group 3] as an [export] option".[39] However, Graham Robson quotes BL Motorsport director John Davenport remembering "that the '100-off' rule applied to alternative engines at the time (which explains why Ford was able to race 24-valve four-cam Capris in 1974), but this waiver never applied to transmissions."[16]
The 100-off rule, to which John Davenport referred, was a section of the FIA's rules for homologating Group 4 cars (actually, for homologating Group 2 cars, but also applicable to Group 4). It covered a list of "Optional equipment which may be recognized with a minimum production of 100 units per year to equip 100 cars". While John Davenport was correct that, in 1975, this list included alternative cylinder heads with different numbers of valves, it also did include alternative gearboxes with overdrives, flywheels, clutches and their housing, and many other engine, transmission, and suspension components. Such optional equipment could be recognized as "bolt-on option kits", which had to be "available freely at the manufacturer's or his dealers' for any one wishing to purchase it" - as would have been the case with the 16-valve head and its drive (pistons, carbs, and manifolds could be changed freely for Group 4), and for the overdriven gearbox, which would have been available as spare parts for the Dolomite Sprint (the heavy duty axle was homologated for Group 3, and thus 4, by a different means). But when the 16-valve TR7 was homologated for Group 4 in October 1975, the 100-off rule did not require the production of any 16-valve engined TR7 road cars, only the kits needed to equip them.[40][11]
A number of other modifications were listed in the amendment (1/1V) to the TR7's homologation for the Group 4 TR7, such as larger front callipers and rear disk brakes. These were allowed from a list of "Optional equipment which may be recognized without a minimum production".[41] Other modifications that are not listed in the papers, such as suspension components and axle locating arms, etc., were given as freely allowed to be changed or added without need of being specifically recognized as part of the homologation process.[42]
FIA Rule change for 1976
"Effective from the end of 1977, the FIA banned alternative cylinder heads",[9] and many other parts homologated in 1975, and also removed the 100-off rule (described above).[10] This issue is a little clouded by problems with the FIA's wording, at least in the English version of Appendix J 1976. The statement in the section relevant to Group 4 homologations is "[t]he mechanical elements recognised in Group 2 before 31.12.75 as well as the authorised modifications according to the prescriptions of Art 260 of former Appendix J may be used until 31.12.77 for rallies." While that only mentions Group 2, it is, as said, in the section on Group 4 homologations, which states the rules for the homologation of modifications for Group 4 were "[e]xactly the same as those authorised for Group 2 (Special Touring Cars) (see Art 261)" except for a scale of weights, and fewer cars needing to be produced to obtain approval.
However, two other points are worth noting in the FIA's wording: Firstly, the note does not restrict the use of these previously homologated parts to the cars for which they were approved. Secondly, it does not actually say that they could not be used after 31.12.77. It seems that Dealer Team Vauxhall managed, with legal argument, to take advantage of the first point, and in 1976-77 used the 16-valve head approved for the Magnum on the Chevette HS without having it re-approved for that car. However, the FIA did not accept the second point, presumably on the legal basis of the exception proving the rule - that if the use of the parts until the end of 1977 was exceptional, then the implied rule, which that exception proved, must be that they were not allowed afterwards. As a result, the FIA banned the Chevette HS fitted with that head, and some other parts homologated in 1975, at Rally Portugal in April 1978.[43]
Also, the FIA's note does not ban these mechanical elements as such. Rather, in effect, it revokes their 1975 approvals from the end of 1977. As a result, those cars fitted with alternative heads, etc., either had to return to the components of the cars used to homologate the model, or have the parts re-homologated under the new rules; and without the 100-off rule that meant producing cars fitted with them. Several teams are reported to have removed such multivalve heads from their cars, including the Toyota Celica, Vauxhall Chevette HS,[note 5] and Lancia Stratos. Ford, however, produced additional Ford Escort RS1800 (X0) cars in 1977 and were able to continue to use it (transferred to Group 4 as the Escort RS) with the BDG engine (a 16-valve Cosworth head on an aluminium alloy version of the Kent block) in 1978.[9][44][45][46]
This change to the FIA's rules was published in December 1975, soon after the TR7 was homologated for Group 4, and the ban would come into effect before the TR8 - which was intended to replace the TR7 in rallying -, would be ready: "John Davenport's team had not been certain it would be available to them until the very day that homologation was granted - on 1 April 1978."[16] Hence, BL had the Sprint 16-valve head recognized for use on the Group 4 TR7 a second time, which was granted in February 1978 in time for its use in the Mintex rally of that year.[11][16] Without the 100-off rule the new rules required the production of at least some 16-valve engined TR7s "meant for normal sale", i.e. "distribution of cars to individual purchasers through the normal commercial channels of the manufacturer".[12][13] While the rules did not specify that any of these cars actually had to have been sold for approval to be granted, it is noted that "[f]ollowing the cancellation of the project, normal practice might have been to dismantle the cars or convert them to normal TR7 power, but surprisingly most were sold off to private buyers."[1] This is supported by what happened to the 25 or so cars of the failed O-series engine TR7 development programme, which were either scrapped or converted to TR8s before sale.[note 6]
While the number of cars required by the FIA to homologate a modification to a Group 4 car does not appear to given, 50 cars are known to have been required for some similar modifications of the era,[note 7] such as the 1977 RS1800 X0 version, the Vauxhall Chevette HSR, and the Porsche 924 Carrera GTS.[14][15] The role of the TR7 Sprints in this process is shown by the series of 6 photographs of one of the press garage cars (later registered as SJW 530S), taken on 1 November 1977, listed in the BMIHT Film and Picture Library as "TR7 Sprint Homologation".[17][note 8]
It is also noted that the 50 Chevette HSRs used to re-homologate several of the parts approved in 1975, were Chevette HSs that had remained unsold, and were modified to the HSR specification. Hence, these cars were indeed, as has been claimed, "run past the homologating officials twice", just several years apart. This clearly shows that the cars needed to re-homologate parts from 1975 in 1977/8 did not have to be scratch-built especially for that role, and could be cars converted from another specification, even other homologation specials.
It is also the case that 400 or so Fixed Head Coupe TR8s (approx. 150 ACT and 250 TCT chassis numbered cars) were built for its homologation, which, is in line with the FIA requirements for a new model rather than a variant of one already homologated. It also noted that these were also sold off when that did not become a catalogued item. However, they would have been covered by the same FIA requirement to be "meant for the normal sale".[12] And while only about 150 of these had been built at the time the approval was granted, it is also noted (in relation to the approval of the Vauxhall Chevette HS) that "due to the recognised difficulties of producing 400 cars down a modern production line, there had arisen an understanding that some leeway was allowed. For instance, if the 400 cars were built within a few months of the homologation date then the car would normally be allowed through."[43]
It may also be noted that production of the TR7 Sprints began almost immediately after the homologation of the 5-speed TR7 for group 3 (in January 1977), when the specification of the 16-valve cars needed to re-homologate the head would have become clear, and that production basically stopped soon after 50 cars had been produced around the end of June 1977 (only 3 cars produced after that, probably all for specific purposes). It may also be noted that in mid-November 1977 (9th to 23rd), just after the homologation pictures had been taken, the 30 SJW cars, supposed to have gone to the press garage, were transferred out of the keeping Sales and Marketing Longbridge, into that of the Power Train and Foundry Division (listed as the "Selling Dealer"), which is identified in the process of the disposal of similar cars.[11][19]
Cancellation
There had been significant speculation regarding the possible production of a 16-valve version of the TR7 from the outset. This was because the two engines used the same block, etc., so it seemed an obvious development. It is even claimed that the 16-valve version of the TR7 was one of the most anticipated sports cars of the 1970s. As these cars were clearly built to be sold, and at least most were, it has been widely assumed that the TR7 Sprints were built as the start of full series production that was cancelled after only these few cars had been made.[3][1]
The usually suggested reason for this unusually timed cancellation is the 17-week-long strike at the BL Speke plant, where the TR7 and at least some of the TR7 Sprints were manufactured, which started on 1 November 1977. This resulted in the closure of the Speke plant in May 1978 and the move of production to Canley, Coventry. This caused major losses to production and so a significant loss of BL's market share. These issues, it is claimed, then led to the cancellation of the TR7 Sprint, and is why the production of the 16-valve TR7 Sprint module did not restart at Canley after the move.[1][3] However, these events all occur well after the main production of the TR7 Sprints ceased in early July 1977 (only 3 more were made after that, all for specific motor shows), and too late to be responsible for the change of status indicated by the export of the LHD cars on 2 Nov. 1977,[18] and the 9 November 1977 start of the transfer of the press garage cars out of the keeping of Sales and Marketing to Power Train and Foundry Division as the "Selling Dealer".[19] Neither do they address the question implied by Bill Piggott in stating "it could be argued that there was no need for it, especially as the TR8 was almost at production status in 1977 when the Sprints were manufactured." Nor yet is it explained why "surprisingly most were sold off to private buyers" when "[f]ollowing the cancellation of the project, normal practice might have been to dismantle the cars or convert them to normal TR7 power" - as happened to the 25 or so O-series engined TR7 version development cars when that programme was cancelled a few years later.[2][1][note 6] It was also noted in 2009 "One might imagine that for a vehicle built less than 35 years ago definitive records would still be available, but... this is not so."[1] Another possible reason given for the cancellation is that "the Marketing department killed it because the 0-60 acceleration times were identical to the 2V engine with little increase in top speed".[3] However, this lack of significant difference is also disputed, and no reason is given for why any TR7 Sprints should have been produced if Sales and Marketing did not want it.
Whereas, author and journalist David Knowles explains the cancellation with a quote from Mike Dale, then BL US VP of Sales and Marketing, stating that "The next shoe to fall was the four valve. It died and wiped out a model option for us." Knowles identifies this "four valve" as the electronic fuel injected (EFI), cost-reduced, slant-four engine from the Triumph SD2 programme, which was intended to be compliant with upcoming (1976) US emissions requirements:[3] this parallels the use of the V8 engine from the much larger production Rover SD1 in the TR8, the relatively small production uprated version of the TR7 that actually was produced for the US.[8] Triumph car enthusiast and author Bill Piggott also states "at the time the [TR7] Sprint was aborted, a fuel injected version of the 16-valve engine was under development for it".[1] There does not appear to be any evidence that this 16-valve EFI engine was intended to be used with the Dolomite Sprint, and no Dolomites are known to have been fitted with it - though it seems there was a black TR7 fitted with this engine and used by BL for development in the early 1970s.[3] Also, a prototype SD2 in the BMM at Gaydon is fitted with an EFI engine that appears identical with the Dolomite Sprint engine, other than the EFI system, ancillaries, additional connections for a smog pump, and manifolds. Note: while the exhaust manifold bears the same cast-in part number (with a separate letter "A") as that used on the TR7 Sprint, and appears to have the same fitting to the exhaust pipe. The engine in this SD2 also appears to have the same casting for the cabin heater at the back of the head, though the part number is not visible.
It is also widely noted that the SD2 programme was cancelled in 1975 as a result of the 1975 Ryder report. That report followed the effective bankruptcy of BLMC in December 1974, and provided the nearly £3 billion[note 9] rescue plan for BL through ownership by the National Enterprise Board, and identified BL’s critical need for rationalization of the range of competing models and engine types produced by BLMC.[5][6] It also appears that the 16-valve TR7 was to be aimed very much at the US market, like the TR7 itself and, even more so, the TR8 uprated version of the TR7 that did go into production for that market. It would therefore have been produced in such small numbers that it needed a US emissions compatible engine from a car of much larger production numbers, just as the TR8 used the Rover V8 engine from the Rover SD1, which not even the Ryder plan was able to stop. In which case, the US emissions compatible engine would have been cancelled with SD2, and that would mean the 16-valve TR7 model was cancelled in 1975, well before the TR7 Sprints were built.
However, even with the catalogued 16-valve TR7 production model cancelled, the TR7 Sprint still needed to be built for the re-homologation of the 16-valve head for use on the Group 4 TR7 rally car, as is described above. Their being built solely for that reason then explains why they were built when "the TR8 was almost at production status", and the reported lack of documentation for the production of the model in 1977. It also explains why they were sold to private buyers rather than dismantled or returned to normal TR7 power,[12][1] the timing of the start of that production in Feb. 1977 with the Group-3 homologation of the 5-speed gearbox and heavy-duty back axle, and the timing of the end of main production in July 1977 when just over 50 properly documented cars needed for the homologation and the model type approval had been built. The FIA requirement for supporting documentation for the model to be made available to scrutineering also explains the publication of the owners handbook and a version of the TR7 repair operations manual covering the 16-valve engine.
See also
Notes
- ^ a b The power and torque figures given are for the 16 valve, 2 litre, slant four engine in a Dolomite Sprint. The TR7 Sprint had a different exhaust manifold - as the Dolomite one interfered with the bulkhead -, which may have been less restrictive and given more power/torque.
- ^ a b This chassis number format is taken from BMIHT Production Record Trace Certificate Number 90/5959 for VVC 697S, dated 25th April 1990, which indicates it as being "RHD, Home Market" Specification. The leading zeros are also visible on the chassis plate shown in Figure 5 and on one shown at '5'.
- ^ The significant differences between 1977 and 1978 year model cars are in the sizes of the filler cap, the 1977 year model having a very large one and the 1978 model having a smaller one; and in the positioning of the interior lights, the 1977 having a light in the headlining and a map light behind and between the seats, and the 1978 having rocking-switch lights in both doors. These modifications were necessary for the TR7 convertible, which was also in design/prototype/pre-production in 1977-8.
- ^ According to Graham Robson, "by April 1978 [when it was homologated] the TR8 had not been launched, so as a compromise to keep BL marketing people happy, it was called TR7V8 instead."
- ^ The Vauxhall Chevette HS rally cars used the 16-valve Lotus head on the GM block, though the road cars with which it was homologated used the GM 16-valve head. During scrutineering at Rally Portugal in early 1978, it was discovered (among some other issues) that the rally cars were still using the Lotus head, despite the rule change making it illegal. As a result, the Chevette was withdrawn, until the GM 16-valve heads were fitted to the rally cars (and the other issues resolved as well).
- ^ a b An article about the TR7 and TR8 experimental records on Canley Classics website suggests the O-series TR7 development fleet cars were scrapped or converted to TR8 specification before disposal in 1981.
- ^ There is speculation that the requirement was 10 percent of the number needed for full homologation into Group 4; however, while that would have been 50 prior to 1976, it would only have been 40 thereafter.
- ^ Given the few cars available at the time, these pictures can only have applied to either the homologation of a Group 4 modification or variant needing 50, or a new Group 4 homologation needing 400, but possibly allowed on a promise to manufacture the remainder within a few months. However, given also the sell-off of the TR7 Sprints that began within days of these pictures being taken, and the approval of the 16-valve head for the second time, as Group 4 variant 8 in amendment 10 to the TR7's form of recognition, it appears that the latter option is unlikely.
- ^ £2,090 million of capital expenditure, allowing for expected inflation from 1975 to 1982, plus £750 million working capital, also allowing for inflation.
References
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z Piggott B., Clay S., Collector's Originality Guide Triumph TR2 TR3 TR4 TR5 TR6 TR7 TR8, page 312-5, 2009, MotorBooks International Company, ISBN 9780760335765.
- ^ a b c d e f g British Motor Industries Heritage Trust Archives, Heritage Motor Centre, Gaydon, Warwickshire, England: accessed June 2013.
- ^ a b c d e f g h i j k l m n o p q r s t u v Knowles D., Triumph TR7 The Untold Story, 2007, pages 110–5, Crowood Press, ISBN 978-1-86126-891-4.
- ^ Bonhams, Sales brochure for KDU 367N
- ^ a b AROnline, (1971-1975)Concepts and prototypes : Triumph SD2
- ^ a b Sir Don Ryder, R. A. Clarke, S. J. Gilen, F. S. McWhirter, C. H. Urwhin. "British Leyland: the next decade" (PDF).
{{cite web}}
: CS1 maint: multiple names: authors list (link) - ^ AROnline, Ryder Report
- ^ a b c Hardcastle D., The Rover V8 Engine, J H Haynes & Co Ltd; 2nd Revised edition (15 May 1995), ISBN 978-0854299614.
- ^ a b c Robson G., "Lancia Stratos" Rally Giants, Veloce Publishing Ltd, 2007, ISBN 1845840410, 9781845840419.
- ^ a b c FIA, Appendix J to the International Sporting Code 1976: Classification, definition and specifications of cars, December 11, 1975, Article 261, paragraph dd.
- ^ a b c d e f RAC TR7 Homologation papers number 3071.
- ^ a b c d FIA, Appendix J to the International Sporting Code 1976: Classification, definition and specifications of cars, December 11, 1975, Article 252, paragraph a.
- ^ a b FIA, Appendix J to the International Sporting Code 1976: Classification, definition and specifications of cars, December 11, 1975, Article 252, paragraph e.
- ^ a b J. W. (?), For Chevette HS 2300 read HSR 2300 . . ., Motorsport, May 1980, p36-7.
- ^ a b Roy Smith, The Porsche 924 Carrera: – evolution to excellence, 2014, Veloce Publishing Ltd, ISBN 1845846451, 9781845846459.
- ^ a b c d e f Robson G., The Works Triumphs: 50 Years in Motorsport, 1993, J H Haynes & Co Ltd, ISBN 978-0854299263.
- ^ a b c d Negatives from number T105512 to T105517 (6 negatives), "TR7 Sprint Homologation", British Motor Industries Heritage Trust Film & Picture Library.
- ^ a b James Johnson, First ACH Built TR7 Sprint 40th Anniversary Year, TR Driver, Jan 2018.
- ^ a b c d e f g h i DVLA Vehicle Enquiry Service (Beta)
- ^ a b c d e f Retrocaricons, Triumph TR7 Sprint Retrieved 3 January 2013
- ^ Retrocaricons, Triumph TR7 Retrieved 16 December 2014
- ^ Classic and Performance Car, "TRIUMPH TR8 | Car Specs | Octane". Archived from the original on 18 October 2013. Retrieved 13 September 2013., Retrieved 13 September 2013
- ^ "Triumph Dolomite Sprint", Auto Car, 21 June 1973, Vol 138 No 4021, pages 36-40
- ^ Department of Transport Type Approval No. 377
- ^ Robson G., Langworth R., Triumph Cars : The Complete Story, 2005, Motor Racing Publications, Limited, ISBN 9781899870721.
- ^ Jan Valentino, BMIHT Web Research request, Log No 161576, 19 April 2017.
- ^ Knowles D., Triumph TR7 The Untold Story, 2007, page 51, Crowood Press, ISBN 978-1-86126-891-4.
- ^ Thoroughbred & Classic Cars, January 1979 edition
- ^ Clausager, A. D. (BMIHT Archivist), untitled letter detailing BMIHT records research on ARW 181S, ref "PRI Triumph", dated 24 February 1989.
- ^ a b Williams R., How to Improve Triumph TR7, TR7-V8, TR8; 2007, Veloce, ISBN 9781845840457
- ^ Moss Europe LTD, MOSS Performance Manual, MGL 9800, no date given
- ^ Bill Piggott, Original Triumph TR7 & TR8, Motorbooks International, ISBN 978-0760309728, 2000, page 61.
- ^ a b Leyland Cars, Triumph TR7 Sprint Handbook, Leyland International, Publication Part No AKM 3967.
- ^ British Leyland UK Ltd., Triumph TR7 Handbook, Publication Part No RTC 9210.
- ^ a b Moss Europe LTD, MOSS Parts Catalogue, MGL 6900, September 1993
- ^ British Leyland, Triumph TR7 Repair Operation Manual, 1978, Leyland Cars, Publication Part No AKM 3079A.
- ^ FIA, Appendix J to the International Sporting Code 1976: Classification, definition and specifications of cars, December 11, 1975, Article 252, paragraph g.
- ^ TR Register, TR Action, Issue 297, April 2017
- ^ a b Bill Price, B.M.C./B.L. Competitions Department: 25 Years in Motorsport - The Cars, the People, the Events, 1989, J H Haynes & Co Ltd, ISBN 978-1859604397.
- ^ FIA, Appendix J to the International Sporting Code 1975: Classification, definition and specifications of cars, January 27, 1975, Article 260, paragraph bb.
- ^ FIA, Appendix J to the International Sporting Code 1975: Classification, definition and specifications of cars, January 27, 1975, Article 260, paragraph cc.
- ^ FIA, Appendix J to the International Sporting Code 1975: Classification, definition and specifications of cars, January 27, 1975, Article 260, "paragraphs c to y.
- ^ a b Saunders R.(Ed.), Chevette 2300 HS-what went wrong, Autosport magazine, April 27, 1978
- ^ Jeff Whitten, Feature car: Vauxhall Chevette, 2007, "RallySport Mag - Feature car: Vauxhall Chevette". Archived from the original on 12 March 2017. Retrieved 10 March 2017., Retrieved 24 October 2016.
- ^ Robson G., "Ford Escort RS1800" Rally Giants, page 16, Veloce Publishing Ltd, 2008, ISBN 1845841409, 9781845841409.
- ^ Robson G., "Ford Escort RS1800" Rally Giants, page 30, Veloce Publishing Ltd, 2008, ISBN 1845841409, 9781845841409.
Cite error: A list-defined reference named "Marren2009" is not used in the content (see the help page).
Cite error: A list-defined reference named "Classic Monthly" is not used in the content (see the help page).
Cite error: A list-defined reference named "FIA1975260Z" is not used in the content (see the help page).
Cite error: A list-defined reference named "TM1" is not used in the content (see the help page).
External links
- TriumphTR7.co TR7 Sprint Conversion Page
- Mike Jeffreys' TR7 Sprint Conversion Page
- Copy of owner written TR Drivers Club article TR7 Sprint Conversion from 1991 issue 2
- Club Triumph TR7-8 Forum thread covering TR7 Sprint Alt. Water Transfer Plate
- Yorkshire TR Drivers page on specific TR7 Sprint parts
- TR Drivers Club List of known TR7 Sprints
- Copy of owner written TR Drivers Club article TR7 16 Valve Sprint from 1991 issue 2
- TR7 Sprint Internet forum
- TR7 & TR7 V8 Rally cars
- More complete reproduction of owner written TR Drivers Club article TR7 16 Valve Sprint from 1991 issue 2
- Club Triumph TR7-8 Forum thread covering TR7 Sprint sidestripes and decals