Gaffer
 |
A gaffer in the motion picture industry is the head of the electrical department, responsible for the execution (and sometimes the design) of the lighting plan for a production. In British English the term gaffer is long established as meaning an old man, or the foreman of a squad of workmen. The term was also used to describe men who adjusted lighting in English theatre and men who tended street lamps, after the "gaff" they used, a pole with a hook on its end.
Gaffers in the motion picture industry
Sometimes the gaffer is credited as Chief Lighting Technician (CLT). In television the term Lighting Director is often used, but sometimes the Technical Director (T.D.) will light the studio set.
Experienced gaffers can coordinate the entire job of lighting, given knowledge of the time of day and conditions to be portrayed, managing resources as broad as electrical generators, lights, cable, and manpower. Gaffers are responsible for knowing the appropriate color of gel (plastic sheeting) to put on the lights or windows to achieve a variety of effects, such as transforming midday into a beautiful sunset. They can re-create the flicker of lights in a subway car, the motion of light inside a turning airplane, or the passage of night into day.
Usually, the gaffer works for and reports to the director of photography (the DP or DOP). The DP is responsible for the overall lighting design, but he or she may give a little or a lot of latitude to the gaffer on these matters, depending on their working relationship. The gaffer works with the key grip, who is in charge of some of the equipment related to the lighting. The gaffer will usually have an assistant called a best boy and, depending on the size of the job, crew members who are called "electricians", although not all of them are trained as electricians in the usual sense of the term.
Many gaffers are expected to own a truck complete with most basic lighting equipment and then rent extra lighting equipment as needed.
Derivation
The exact origin of gaffer remains obscure. There are, however, a few hypotheses:
Early studios were "available light" only, so there were articulated mirrored panels in the roof of the studio buildings that could be pushed from the floor by long "gaff" poles to bounce the sunlight to where it was needed on the set. Because the Earth moves continuously these hinged panels would need to be gaffed after each take. Once electric lighting instruments became the standard equipment, the light operators were known as electricians while the older, more experienced lighting technicians were still known as gaffers. Eventually it came to mean someone in charge of lighting.
Also posited: early films used mostly natural light, which stagehands controlled with large tent cloths using long poles called gaffs (stagehands were often beached sailors or stevedores, and a gaff is a type of boom on a sailing ship), or a pole with a hook on the end to assist in bringing nets or large fish aboard.
It should also be noted that gaff tape, an adhesive tape used on the theatrical stage and the film set may have its name derived from the job of gaffer. It is known for having many uses, and its wide-spread utilitarian use could be easily likened to duct tape.
Gaffer as an old man or foreman
In colloquial British English gaffer means a foreman, and is used as a synonym for "boss". In the UK the term is commonly used to refer to sports coaches (football, rugby, etc).
The term is also sometimes used colloquially to refer to an old man, an elderly rustic, and can be used as a prefix to the name (as in Gaffer Gamgee in The Lord of the Rings). The word is probably a shortening of "godfather", with "ga" from association with "grandfather". The female equivalent was "Gammer", which came to colloquially refer to an old lady or gossip.[1]
In 16th Century English, the term "gaffer" denoted a man who was the head of any organized group of labourers. In 16th and 17th century rural England it was used as a title slightly inferior to "Master", similar to "Goodman", and was not confined to elderly men. The chorus of a famous Australian shearer's song, The Backblocks' Shearer (also known as Widgegoeera Joe), written by W. Tully at Nimidgee, NSW (c.1900), refers to a gaffer:
- Hurrah, me boys, my shears are set,
- I feel both fit and well;
- Tomorrow you’ll find me at my pen
- When the gaffer rings the bell.
- With Hayden's patent thumb guards fixed
- And both my blades pulled back;
- Tomorrow I go with my sardine blow
- For a century or the sack!
- In glassblowing, a gaffer is the central figure in the creation of a piece of art. For example, At the Corning Glass Works in Corning, New York, a gaffer is a skilled artisan who blows through a long tube to shape molten glass into a variety of useful and/or artistic objects. A business district of Corning has been named "The Gaffer District" in honor of these artisans.
References
- ^ The Concise Oxford Dictionary, 5th Edition, OUP 1964