Variable refrigerant flow

Variable refrigerant flow (VRF) is an HVAC technology invented in Japan by Daikin company in 1982. Like ductless minisplits VRFs use refrigerant as the cooling and heating medium. This refrigerant is conditioned by a single outdoor condensing unit, and is circulated within the building to multiple fan-coil units (FCUs).

VRFs are typically installed with an Air conditioner inverter which adds an DC inverter to the compressor in order to support variable motor speed and thus variable refrigerant flow rather than simply on/off operation. By operating at varying speeds, VRF units work only at the needed rate allowing for substantial energy savings at partial-load conditions. Heat recovery VRF technology allows individual indoor units to heat or cool as required, while the compressor load benefits from the internal heat recovery. Energy savings of up to 55% are predicted over comparable unitary equipment. This also results in greater control of the building's interior temperature by the building's occupants.

VRFs come in two system format, two pipe and three pipe systems. In a 2 pipe system all of the zones must either be all in cooling or all in heating. A three pipe Heat Recovery (HR) systems has the ability to simultaneously heat certain zones while cooling others. In this case the heat extracted from zones requiring cooling is put to use in the zones requiring heating. This is made possible because the heating unit is functioning as a condenser, providing sub-cooled liquid back into the line that is being used for cooling. While the 3 pipe system has a greater initial cost, it allows for better zoned thermal control of a building and overall greater efficiencies.

Japan

VRF systems have been used in Japan since the 1980s. Currently, in Japan, VRFs are used in 50% of mid size office buildings (up to 70,000 ft² or 6,500 m²) and 33% large commercial buildings (more than 70,000 ft² or 6,500 m²).

External links

• An article on VRF from the American Institute of Architects