Flowchart

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DevinCook (talk | contribs) at 23:36, 14 October 2014 (Undid revision 629591089 by 162.17.206.199 (talk) Good faith). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

For the music group, see Flowchart (band).
A simple flowchart representing a process for dealing with a non-functioning lamp.

A flowchart is a type of diagram that represents an algorithm, workflow or process, showing the steps as boxes of various kinds, and their order by connecting them with arrows. This diagrammatic representation illustrates a solution model to a given problem. Flowcharts are used in analyzing, designing, documenting or managing a process or program in various fields.[1]

Overview

Flowcharts are used in designing and documenting complex processes or programs. Like other types of diagrams, they help visualize what is going on and thereby help the people to understand a process, and perhaps also find flaws, bottlenecks, and other less-obvious features within it. There are many different types of flowcharts, and each type has its own repertoire of boxes and notational conventions. The two most common types of boxes in a flowchart are:

  • a processing step, usually called activity, and denoted as a rectangular box
  • a decision, usually denoted as a diamond.

A flowchart is described as "cross-functional" when the page is divided into different swimlanes describing the control of different organizational units. A symbol appearing in a particular "lane" is within the control of that organizational unit. This technique allows the author to locate the responsibility for performing an action or making a decision correctly, showing the responsibility of each organizational unit for different parts of a single process.

Flowcharts depict certain aspects of processes and they are usually complemented by other types of diagram. For instance, Kaoru Ishikawa defined the flowchart as one of the seven basic tools of quality control, next to the histogram, Pareto chart, check sheet, control chart, cause-and-effect diagram, and the scatter diagram. Similarly, in UML, a standard concept-modeling notation used in software development, the activity diagram, which is a type of flowchart, is just one of many different diagram types.

Nassi-Shneiderman diagrams and Drakon-charts are an alternative notation for process flow.

Common alternative names include: flowchart, process flowchart, functional flowchart, process map, process chart, functional process chart, business process model, process model, process flow diagram, work flow diagram, business flow diagram. The terms "flowchart" and "flow chart" are used interchangeably.

The underlying graph structure of a flow chart is a flow graph, which abstracts away node types, their contents and other ancillary information.

History

File:Flowchart-template.jpg
Template for drawing flowcharts (late 1970s) showing the different symbols.

The first structured method for documenting process flow, the "flow process chart", was introduced by Frank Gilbreth to members of the American Society of Mechanical Engineers (ASME) in 1921 in the presentation “Process Charts—First Steps in Finding the One Best Way”.[2] Gilbreth's tools quickly found their way into industrial engineering curricula. In the early 1930s, an industrial engineer, Allan H. Mogensen began training business people in the use of some of the tools of industrial engineering at his Work Simplification Conferences in Lake Placid, New York.

A 1944 graduate of Mogensen's class, Art Spinanger, took the tools back to Procter and Gamble where he developed their Deliberate Methods Change Program. Another 1944 graduate, Ben S. Graham, Director of Formcraft Engineering at Standard Register Industrial, adapted the flow process chart to information processing with his development of the multi-flow process chart to display multiple documents and their relationships.[3] In 1947, ASME adopted a symbol set derived from Gilbreth's original work as the "ASME Standard: Operation and Flow Process Charts."[4]

Douglas Hartree in 1949 explained that Herman Goldstine and John von Neumann had developed a flowchart (originally, diagram) to plan computer programs.[5] His contemporary account is endorsed by IBM engineers[6] and by Goldstine's personal recollections.[7] The original programming flowcharts of Goldstine and von Neumann can be seen in their unpublished report, "Planning and coding of problems for an electronic computing instrument, Part II, Volume 1" (1947), which is reproduced in von Neumann's collected works.[8] Besides describing the logical flow of control, flowcharts allowed programmers to lay out machine language programs in computer memory before the development of assembly languages and assemblers.[9]

Flowcharts used to be a popular means for describing computer algorithms and are still used for this purpose.[10] Modern techniques such as UML activity diagrams and Drakon-charts can be considered to be extensions of the flowchart. In the 1970s the popularity of flowcharts as an own method decreased when interactive computer terminals and third-generation programming languages became the common tools of the trade, since algorithms can be expressed much more concisely as source code in such a language, and also because designing algorithms using flowcharts was more likely to result in spaghetti code because of the need for gotos to describe arbitrary jumps in control flow. Often pseudo-code is used, which uses the common idioms of such languages without strictly adhering to the details of a particular one.

Flowchart building blocks

Symbols

FlowChart Symbols List A typical flowchart from older basic computer science textbooks may have the following kinds of symbols:

Start and end symbols
Represented as circles, ovals or rounded (fillet) rectangles, usually containing the word "Start" or "End", or another phrase signaling the start or end of a process, such as "submit inquiry" or "receive product".
Arrows
Showing "flow of control". An arrow coming from one symbol and ending at another symbol represents that control passes to the symbol the arrow points to. The line for the arrow can be solid or dashed. The meaning of the arrow with dashed line may differ from one flowchart to another and can be defined in the legend.
Generic processing steps
Represented as rectangles. Examples: "Add 1 to X"; "replace identified part"; "save changes" or similar.
Subroutines
Represented as rectangles with double-struck vertical edges; these are used to show complex processing steps which may be detailed in a separate flowchart. Example: PROCESS-FILES. One subroutine may have multiple distinct entry points or exit flows (see coroutine); if so, these are shown as labeled 'wells' in the rectangle, and control arrows connect to these 'wells'.
Input/Output
Represented as a parallelogram. Examples: Get X from the user; display X.
Prepare conditional
Represented as a hexagon. Shows operations which have no effect other than preparing a value for a subsequent conditional or decision step (see below).
Conditional or decision
Represented as a diamond (rhombus) showing where a decision is necessary, commonly a Yes/No question or True/False test. The conditional symbol is peculiar in that it has two arrows coming out of it, usually from the bottom point and right point, one corresponding to Yes or True, and one corresponding to No or False. (The arrows should always be labeled.) More than two arrows can be used, but this is normally a clear indicator that a complex decision is being taken, in which case it may need to be broken-down further or replaced with the "pre-defined process" symbol.
Junction symbol
Generally represented with a black blob, showing where multiple control flows converge in a single exit flow. A junction symbol will have more than one arrow coming into it, but only one going out.
In simple cases, one may simply have an arrow point to another arrow instead. These are useful to represent an iterative process (what in Computer Science is called a loop). A loop may, for example, consist of a connector where control first enters, processing steps, a conditional with one arrow exiting the loop, and one going back to the connector.
For additional clarity, wherever two lines accidentally cross in the drawing, one of them may be drawn with a small semicircle over the other, showing that no junction is intended.
Labeled connectors
Represented by an identifying label inside a circle. Labeled connectors are used in complex or multi-sheet diagrams to substitute for arrows. For each label, the "outflow" connector must always be unique, but there may be any number of "inflow" connectors. In this case, a junction in control flow is implied.
Concurrency symbol
Represented by a double transverse line with any number of entry and exit arrows. These symbols are used whenever two or more control flows must operate simultaneously. The exit flows are activated concurrently when all of the entry flows have reached the concurrency symbol. A concurrency symbol with a single entry flow is a fork; one with a single exit flow is a join.

All processes should flow from top to bottom and left to right.

Data-flow extensions

A number of symbols have been standardized for data flow diagrams to represent data flow, rather than control flow. These symbols may also be used in control flowcharts (e.g. to substitute for the parallelogram symbol).

  • A Document represented as a rectangle with a wavy base;
  • A Manual input represented by quadrilateral, with the top irregularly sloping up from left to right. An example would be to signify data-entry from a form;
  • A Manual operation represented by a trapezoid with the longest parallel side at the top, to represent an operation or adjustment to process that can only be made manually.
  • A Data File represented by a cylinder.

Types of flowchart

Sterneckert (2003) suggested that flowcharts can be modeled from the perspective of different user groups (such as managers, system analysts and clerks) and that there are four general types:[11]

  • Document flowcharts, showing controls over a document-flow through a system
  • Data flowcharts, showing controls over a data-flow in a system
  • System flowcharts showing controls at a physical or resource level
  • Program flowchart, showing the controls in a program within a system

Notice that every type of flowchart focuses on some kind of control, rather than on the particular flow itself.[11]

However there are several of these classifications. For example Andrew Veronis (1978) named three basic types of flowcharts: the system flowchart, the general flowchart, and the detailed flowchart.[12] That same year Marilyn Bohl (1978) stated "in practice, two kinds of flowcharts are used in solution planning: system flowcharts and program flowcharts...".[13] More recently Mark A. Fryman (2001) stated that there are more differences: "Decision flowcharts, logic flowcharts, systems flowcharts, product flowcharts, and process flowcharts are just a few of the different types of flowcharts that are used in business and government".[14]

In addition, many diagram techniques exist that are similar to flowcharts but carry a different name, such as UML activity diagrams.

Software

Diagramming

Main article: Diagramming software § Flowchart

Any drawing program can be used to create flowchart diagrams, but these will have no underlying data model to share data with databases or other programs such as project management systems or spreadsheet. Some tools offer special support for flowchart drawing. Many software packages exist that can create flowcharts automatically, either directly from a programming language source code, or from a flowchart description language. On-line web-based versions of such programs are available.

Programming

Flowgorithm

There are several applications that use flowcharts to represent and execute programs. Generally these are used as teaching tools for beginner students.

These include:

See also

Template:Multicol

Related diagrams

Template:Multicol-break

Related subjects

Template:Multicol-end

References

  1. ^ SEVOCAB: Software and Systems Engineering Vocabulary. Term: Flow chart. Retrieved 31 July 2008.
  2. ^ Frank Bunker Gilbreth, Lillian Moller Gilbreth (1921) Process Charts. American Society of Mechanical Engineers.
  3. ^ Graham, Jr., Ben S. (10 June 1996). "People come first". Keynote Address at Workflow Canada. {{cite web}}: Italic or bold markup not allowed in: |work= (help)
  4. ^ American Society of Mechanical Engineers (1947) ASME standard; operation and flow process charts. New York, 1947. (online version)
  5. ^ Hartree, Douglas (1949). Calculating Instruments and Machines. The University of Illinois Press. p. 112. {{cite book}}: External link in |title= (help) Hartree stated:
    "Von Neumann and Goldstine (40) have proposed a method of indicating the structure of the sequence of operating instructions by means of a "flow diagram" representing the control sequence. This is in the form of a block diagram, in which the blocks represent operations or groups of operations, and are joined by directed lines representing the sequence of these operations..."
  6. ^ Bashe, Charles (1986). IBM's Early Computers. The MIT Press. p. 327.
  7. ^ Goldstine, Herman (1972). The Computer from Pascal to Von Neumann. Princeton University Press. pp. 266–267. ISBN 0-691-08104-2.
  8. ^ Taub, Abraham (1963). John von Neumann Collected Works. Vol. 5. Macmillan. pp. 80–151.
  9. ^ Akera, Atsushi; Frederik Nebeker (2002). From 0 to 1: An Authoritative History of Modern Computing. Oxford University Press. p. 105. ISBN 0-19-514025-7.
  10. ^ Bohl, Rynn: "Tools for Structured and Object-Oriented Design", Prentice Hall, 2007.
  11. ^ a b Alan B. Sterneckert (2003) Critical Incident Management. p. 126
  12. ^ Andrew Veronis (1978) Microprocessors: Design and Applications. p. 111
  13. ^ Marilyn Bohl (1978) A Guide for Programmers. p. 65.
  14. ^ Mark A. Fryman (2001) Quality and Process Improvement. p. 169.

Further reading

External links

Wikimedia Commons has media related to Flow chart.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Flowchart&oldid=629642356"