.222 Remington

.222 Remington
Type	rifle
Place of origin	USA
Production history
Designer	Mike Walker
Manufacturer	Remington
Produced	1950
Specifications
Case type	rimless bottleneck
Bullet diameter	.224 in (5.7 mm)
Neck diameter	.253 in (6.4 mm)
Shoulder diameter	.357 in (9.1 mm)
Base diameter	.376 in (9.6 mm)
Rim diameter	.378 in (9.6 mm)
Case length	1.700 in (43.2 mm)
Rifling twist	1-12
Primer type	small rifle
Ballistic performance
Bullet mass/type Velocity Energy 40 gr (3 g) HP 3,583 ft/s (1,092 m/s) 1,141 ft⋅lbf (1,547 J) 50 gr (3 g) SP 3,168 ft/s (966 m/s) 1,115 ft⋅lbf (1,512 J) 55 gr (4 g) SP 3,095 ft/s (943 m/s) 1,170 ft⋅lbf (1,590 J) 60 gr (4 g) VMax 2,937 ft/s (895 m/s) 1,150 ft⋅lbf (1,560 J)
Source(s): Hodgdon Online Reloading data

The .222 Remington aka the Triple Deuce is a centerfire rifle cartidge introduced in 1950, and was the first commercial rimless .22 (5.56 mm) cartridge made in the United States. The .222 Remington was an entirely new design, not derived from any previously existing cartridge.

Introduction

The .222 Remington was introduced in the Remington Arms Model 722 bolt action rifle, and was an instant success. It was not unusual for factory rifles to produce groups of one minute of arc at 100 yards (91 m) with no tuning. The accuracy and flat trajectory of the cartridge meant that it was quickly adopted for varmint and benchrest rifles, and was the dominant cartridge in both disciplines for decades. While the faster .220 Swift and .22-250 provide more reach, it's at the expense of far more powder (roughly 50% more), muzzle blast, and barrel erosion. For example, maximum loads for a .222 Remington average 25.0 grains, the .22-250 averages 41.0, and the .220 Swift averages 46.0 for it's maximum.

The .222 Remington was also popular in Europe. Sako was one of the first European makers to introduce .222 Remington rifles and cartridges, and German and Austrian hunters quickly adopted the .222 Remington for hunting smaller deer sized game.

Obsolescence

The .222 Rem. was finally eclipsed in benchrest competition by the 6 mm PPC cartridge, a dedicated benchrest cartridge, chambered almost exclusively in single shot rifles. The 6mm PPC is still a top benchrest cartridge.

When the US military was looking for a new smallbore rifle cartridge, Remington started with the .222 Remington, and stretched it to increase powder capacity by about 20% in 1958 to make the .222 Remington Magnum. The greater powder capacity put the velocities between the standard .222 Remington and the 22-250. The cartridge was not accepted by the military, but it was introduced commercially. In 1964, the 5.56 x 45 mm, also based on a stretched .222 Rem. case, was adopted along with the new M-16 rifle. The 5.56 mm cartridge had a capacity only slightly less than the .222 Rem. Mag., about 5% less, so when Remington introduced the commercial variant of the new military cartridge, the .223 Remington, both the .222 Remington and the .222 Rem. Mag. faded quickly into obsolescence, being replaced by the .223 Remington.

While the .222 Remington is rarely found in current production, its derivative cartridges are among the most popular in the world. In addition to the .222 Rem. Mag. and .223 Remington, the .222 has also produced the .221 Fireball, the fastest production handgun cartridge, and the new .204 Ruger, the fastest production rifle cartridge.

See also

• .222 Remington Magnum
• .223 Remington
• 5.56 x 45 mm

References

• Speer Reloading Manual #11, Omark Industries, Inc. 1987
• Cartridge Dimensions

External Links

• .222 Remington and .222 Rem Mag. by Chuck Hawks