Jump to content

Flagg Coal Company 75

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 2600:1000:b056:8ca0:3969:c2a2:3660:32e2 (talk) at 04:00, 18 November 2022. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Flagg Coal Company 75
Flagg Coal at Train Festival 2009 in Owosso, Michigan
Type and origin
Power typeSteam
BuilderVulcan Iron Works, Wilkes Barre, PA
Serial number3972
Build dateDecember 1930
Rebuild date1991–2002
Specifications
Configuration:
 • Whyte0-4-0ST
 • UICB
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.38 in (965 mm)
Adhesive weight82,000 lb (37.2 metric tons)
Loco weight82,000 lb (37.2 metric tons)
Fuel typeCoal
Boiler pressure150 lbf/in2 (1.03 MPa)
CylindersTwo, outside
Cylinder size14 in × 22 in (356 mm × 559 mm)
Valve typeSlide valves
Performance figures
Tractive effort18,325 lbf (81.51 kN)
Career
OperatorsFlagg Coal Company,
Solvay Process Quarry
NumbersFCC 75
FCC 2
Solvay Process Quarry 75
LocaleMichigan
Retired1954
Restored2002
Current ownerJohn and Barney Gramling
DispositionOperational

Flagg Coal Company 75 is a 0-4-0 saddletank steam locomotive built for the Flagg Coal Company in 1930. Restored and owned by John and Byron Gramling, the engine was loaned in 2002 to the Steam Railroading Institute in Owosso, Michigan where it is used for demonstrations and for powering train rides and excursions. Originally numbered Flagg Coal Company 2, the locomotive's number was changed to 75 when it was sold to the Solvay Process Quarry in 1935. It never actually wore "Flagg Coal Company 75" during its service life.

History

FCC No. 75 went into service in December 1930 as No. 2 for the Flagg Coal Company of Avoca, Pennsylvania, where it was used as a switch engine. In 1935 it was sold to the Solvay Process Co. in Jamesville, New York, and renumbered No. 75. It was then used to push 4-wheel hopper cars from the steam shovel to the crusher at the rock quarry. In the early 1950s the Solvay Process Co. replaced the 0-4-0s like No. 75 with trucks and dieselized the handling of finished crushed stone with two GE 80 tonners, No. 5 and No. 6. (#6 now belongs to the Central NY Chapter, NRHS along with former Solvay Process Co. Alco 0-4-0 # 53). In 1954, No. 75 and twelve other locomotives were sold to Dr. Groman and his planned Rail City Museum in Sandy Pond, New York. The locomotive sat there untouched until 1991 when John and Barney Gramling purchased it with the intent to restore it to operating condition. The father-son duo painstakingly disassembled the locomotive, moved it to their shop in Ashley, Indiana and over the course of the following ten years returned it to service. In 2002 John and Barney loaned the locomotive to the Steam Railroading Institute where it was used for demonstrations and to power steam excursions.

Demonstrations

Flagg Coal Company 75 has traveled around the country to operate, give demonstrations and educate the public about steam locomotive operation and history. The locomotive has made a few historic appearances, such as being the first steam locomotive to operate in Port Huron, Michigan, since the early 1960s.

References

  • "Have Engine, Will Travel". Flagg Coal Company 75.
  • "Flagg Coal Company #75". Steam Railroading Institute. Archived from the original on October 21, 2008.
  • "Home". Steam Railroading Institute. Archived from the original on February 4, 2009.