Jump to content

AEC Regal VI

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Dl2000 (talk | contribs) at 03:24, 12 January 2018 (en-GB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

AEC Regal VI
Preserved Metropolitan Transport Trust, Perth
AEC Regal VI
Overview
ManufacturerAEC
Production1962-1979
Body and chassis
Doors1 or 2
Floor typeStep entrance
Powertrain
EngineAEC AH690
Capacity11.3 litres
Dimensions
Length11.2 metres
Width2.5 metres
Height3.0 metres
Chronology
PredecessorAEC Regal IV
SuccessorLeyland National

The AEC Regal VI was an underfloor-engine single-decker bus chassis manufactured by AEC in the 1960s. It was unveiled at the 1960 Commercial Motor Show and was intended to be a purely export chassis.[1] It was an updated version of the underfloor-engined AEC Regal IV, having an 11.3-litre AH690 engine instead of the Regal IVs 9.6-litre AH590 engine.[2] It was available in both left and right hand drive versions, other options included power assisted steering and air suspension.

Operators

The Regal VI had a strong following, vehicles being exported to Argentina, Australia, Belgium, The Netherlands, Portugal and Uruguay.

The largest orders for the Regal VI, two orders totaling 150 were destined for the Montevideo area of Uruguay and a larger order of 500 came from Buenos Aires, Argentina.[3]

In Australia, the Regal VI was purchased by the Melbourne & Metropolitan Tramways Board (100), the Municipal Tramways Trust, Adelaide (30) and the Metropolitan Transport Trust, Perth (75).[4][5][6][7]

Regal VIs variant

In South Africa, AEC engineered its own style of Regal, the Kudu. This was made up of a Regal VI chassis, an AV690 (11.3-litre vertical engine) mounted on the front overhang instead of under the floor. This allowed a reliably clean flow of air to the engine. There was still sufficient space to allow a front entrance ahead of the front axle, allowing the driver to supervise passenger loadings as on the standard Regal VI.

The Kudu was assembled from complete knock down kits at the Durban factory which had recently been acquired by AEC. By 1964 AEC (South Africa) Ltd had followed up the order for 100 with a repeat order for another 100, to be sold to operators all over South Africa. By 1974 over 1,500 were in service.

References

  1. ^ "AEC bus developed for Australia" Railway Gazette 17 August 1962 page 203
  2. ^ New Passenger Model from AEC Commercial Motor 26 August 1960
  3. ^ Orders and Deliveries Commercial Motor 17 August 1962
  4. ^ Orders and Deliveries Commercial Motor 31 August 1962
  5. ^ AEC Regal 6 Australian Bus Fleet Lists
  6. ^ Recovering from the war Archived 5 March 2016 at the Wayback Machine Adelaide Tram Museum
  7. ^ AEC Regal VI Perth Bus Info

Media related to AEC Regal VI at Wikimedia Commons