Jump to content

Dornier Aerodyne

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Cydebot (talk | contribs) at 04:21, 8 May 2019 (Robot - Moving category German experimental aircraft 1970–1979 to Category:1970s German experimental aircraft per CFD at Wikipedia:Categories for discussion/Log/2019 April 19.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Aerodyne
The Aerodyne on display at the Deutsches Museum Flugwerft Schleissheim
Role VTOL Experimental aircraft
National origin West Germany
Manufacturer Dornier Flugzeugwerke
Designer Alexander Lippisch
First flight 18 September 1972
Retired 30 November 1972
Primary user BMVg
Number built 1

The Dornier Aerodyne was the designation of a "wingless" VTOL unmanned aircraft. Conceived by Alexander Lippisch, it was developed and built by Dornier on behalf of the Federal German Ministry of Defense. Lippisch was part of the team. The first flight took place on 18 September 1972. The development ended on 30 November 1972 after successful hovering-flight testing with the aircraft. Experimentation did not continue due to lack of interest in the Bundeswehr (German Armed Forces), and/or the desire to undertake plans for manned helicopters.

Description

The principle behind the Aerodyne is the combination of lift and thrust production in a single construction unit and flow channel, i.e. a ducted fan. Flaps at the end of the fan divert the outflowing air to produce lift, thrust, or a combination of both. As a result, the Aerodyne could be steered and flown in the entire range between hovering and full-forward flight.

For forward flight, the Aerodyne had a conventional tail unit at the rear, which allowed for pitch and yaw control. The equipment was unmanned and operated by remote control.

It was intended to be a land- or ship-supported drone (UAV) for aerial reconnaissance.

Specifications

  • Length: 5.5 metres (18 ft)
  • Width: 1.9 metres (6 ft 3 in)
  • Fan Diameter: 1.1 metres (3 ft 7 in)
  • Engine: 1 MTU 6022 A-3, 370 shaft horsepower (280 kW)
  • Total Weight: 435 kilograms (959 lb)

References

"Eine Dokumentation zur Geschichte des Hauses Dornier", Ed. Dornier GmbH, 1983, bound, 214 pp.