Jump to content

British C-class submarine

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Lyndaship (talk | contribs) at 19:18, 3 October 2019 (correct year of publication, replaced: title=Conway's All the World's Fighting Ships: 1906–1921|year=1984 → title=Conway's All the World's Fighting Ships: 1906–1921|year=1985). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

HMS C38
HMS C38
Class overview
NameC class
BuildersVickers, Barrow; HM Dockyard Chatham
Operators Royal Navy
Preceded byB class
Succeeded byD class
Subclasses
  • Group 1 : C-1C-18
  • Group 2 : C-19C-38
In commission30 October 1906–1922
Completed38
Lost10
Retired28
General characteristics
TypeSubmarine
Displacement
  • Group 1 :
  • 287 long tons (292 t) surfaced
  • 316 long tons (321 t) submerged
  • Group 2 :
  • 290 long tons (295 t) surfaced
  • 320 long tons (325 t) submerged
Length143 ft 2 in (43.64 m)
Beam13 ft 6 in (4.11 m)
Propulsion600 hp (450 kW) Vickers petrol engine, 200 hp electric motor, single propeller
Speed
  • Group 1 :
  • 12 kn (22 km/h; 14 mph) surfaced
  • 7 kn (13 km/h; 8.1 mph) submerged
  • Group 2 :
  • 13 kn (24 km/h; 15 mph) surfaced
  • 8 kn (15 km/h; 9.2 mph) submerged
Range
  • Group 1 :
  • 1,500 nmi (2,800 km) at 7 kn (13 km/h; 8.1 mph) surfaced
  • 50 nmi (93 km) at 4.5 kn (8.3 km/h; 5.2 mph) submerged
  • Group 2:
  • 2,000 nmi (3,700 km) at 7 kn (13 km/h; 8.1 mph) surfaced
  • 55 nmi (102 km) at 5 kn (9.3 km/h; 5.8 mph) submerged
Complement16
Armament2 × 18-inch (450 mm) torpedo tubes (2 torpedoes)

The British C-class submarines were the last class of petrol engined submarines of the Royal Navy and marked the end of the development of the Holland class in the Royal Navy. Thirty-eight were constructed between 1905 and 1910 and they served through World War I.

With limited endurance and only a ten percent reserve of buoyancy over their surface displacement, they were poor surface vessels, but their spindle shaped hull made for good underwater performance compared to their contemporaries.

Service history

Three (C36, C37 and C38) had been sent to Hong Kong in 1911 and during the war the remainder were mainly used for coastal defence, based at the east coast ports of Leith, Harwich, Hartlepool, Grimsby and Dover, some operating with Q-ships which were decoying U-boats. The technique was for a trawler to tow the submarine and communicate with it by telephone. When a U-boat surfaced to attack the trawler with its deck gun, the British submarine would slip its tow and attempt to torpedo the U-boat.

C3, the first boat commissioned, was employed during the Zeebrugge raid on 23 April 1918. Packed with explosives it was blown up in an attempt to destroy a viaduct, for which her commander Lieutenant Richard Sandford was awarded the Victoria Cross.

Four operated in the Baltic Sea, based at Tallinn as part of the blockade of Germany trying to prevent the import of iron ore from Sweden. They were sent there in September 1915 via a tortuous route — towed around the North Cape to Arkhangelsk and taken by barge to Kronstadt. Three of these boats were destroyed (along with the British E class submarines E1, E8, E9, E19) outside Helsinki in 1918 to prevent capture by German troops of the Baltic Sea Division who had landed nearby.[1]

Ten of the submarines were lost during the war, including C16 which was mistakenly rammed by HMS Melampus. The surviving boats were disposed of at the end of the war with the exception of C4, which was retained for trials until being scrapped in 1922.

Japan also used their own version of the C-class, which they had bought from Vickers, this was the Template:Sclass-, two almost-identical designs came from Ha-1, these were the Template:Sclass- and Template:Sclass-es.

C-class boats

38 C-class boats were built in total for the RN:

Column-generating template families

The templates listed here are not interchangeable. For example, using {{col-float}} with {{col-end}} instead of {{col-float-end}} would leave a <div>...</div> open, potentially harming any subsequent formatting.

Column templates
Type Family
Handles wiki
table code?
Responsive/
mobile suited
Start template Column divider End template
Float "col-float" Yes Yes {{col-float}} {{col-float-break}} {{col-float-end}}
"columns-start" Yes Yes {{columns-start}} {{column}} {{columns-end}}
Columns "div col" Yes Yes {{div col}} {{div col end}}
"columns-list" No Yes {{columns-list}} (wraps div col)
Flexbox "flex columns" No Yes {{flex columns}}
Table "col" Yes No {{col-begin}},
{{col-begin-fixed}} or
{{col-begin-small}}
{{col-break}} or
{{col-2}} .. {{col-5}}
{{col-end}}

Can template handle the basic wiki markup {| | || |- |} used to create tables? If not, special templates that produce these elements (such as {{(!}}, {{!}}, {{!!}}, {{!-}}, {{!)}})—or HTML tags (<table>...</table>, <tr>...</tr>, etc.)—need to be used instead.

See also

Notes

  1. ^ "C 26" (in Finnish).

References