Jump to content

PocketShip

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by BHGbot (talk | contribs) at 09:18, 15 November 2019 (BHGbot 4: remove links to deleted Portal:Nautical for topics without suitable alternative). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Development
DesignerJohn C. Harris
LocationAnnapolis
Year2008
RolePocket cruiser
Boat
Crew1–4
Draft16 inches (41 cm) (rowing)
36 inches (91 cm) (sailing)
Hull
TypeMonohull
ConstructionPlywood
Hull weight800 pounds (360 kg)
LOA14 feet 10 inches (4.52 m)
Beam6 feet 3 inches (1.91 m)
Hull appendages
Keel/board typeKeel and centerboard
Rig
Rig typeGaff
Sails
Mainsail area109 square feet (10.13 m2)
Jib/genoa area39 square feet (3.62 m2)
Spinnaker area90 square feet (8.36 m2)
Total sail area148 square feet (13.75 m2)

PocketShip is a stitch-and-glue pocket cruiser sailboat designed by John C. Harris of Chesapeake Light Craft.

History

Exterior diagram of PocketShip.

The first PocketShip hull was built by Geoff Kerr at Two Daughters Boatworks in Westford, Vermont. Commencing in mid-January 2008, it took Kerr 525 hours to complete the hull and spars. The hull was rigged at Chesapeake Light Craft in Annapolis, Maryland, and launched on May 10, 2008. Sailing trials were completed in various waters from Maine to Maryland with crews of 1–4 adults in winds of up to 20 knots.[1]

As of February 2010, PocketShips have been completed or are under construction in the United States, Canada, France, Australia, and Japan.[1]

Design

John C. Harris in the cuddy of the first PocketShip.

The PocketShip is a "refined model, meant to sail well on all points, provide dry camping accommodations for one or two adults, and tow behind a four-cylinder car."[1] The cockpit was designed for comfortable daysailing and can be used for sleeping if necessary. A portable head stows beneath the cockpit, sliding forward into the cuddy for use.[1]

Auxiliary propulsion can be provided with a pair of oars, a yuloh, or a small outboard motor.

Rigging

PocketShips are single-masted sloops set with a gaff-rigged mainsail and a roller-furled jib. A spinnaker may be set for flying downwind.

Notes

  1. ^ a b c d "PocketShip". Chesapeake Light Craft. February 24, 2010.

Further reading

  • Harris, John C. How to Build PocketShip. Matt Cordrey, ed. Annapolis: Chesapeake Light Craft, 2008.
– Manual for PocketShip construction; available from Chesapeake Light Craft.
  • Harris, John C. "Plan Study: PocketShip." Small Craft Advisor 55 (January/February 2008 [2009]): 52–53.
– Overview of PocketShip by the designer; available from Small Craft Advisor.
  • Segal, Dan. "Small and Simple Cruising: The PocketShip from Chesapeake Light Craft." WoodenBoat 207 (March/April 2009): 76–81.
– Review of PocketShip; available from WoodenBoat.