Beechcraft AT-10 Wichita
This article needs additional citations for verification. (January 2010) |
AT-10 Wichita | |
---|---|
![]() | |
Role | Military trainer aircraft |
Manufacturer | Beechcraft |
First flight | 1941 |
Introduction | 1942 |
Primary user | United States Army Air Forces |
Produced | 1942–1944 |
Number built | 2,371 |
The Beechcraft AT-10 Wichita was an American World War II trainer built for the United States Army Air Forces (USAAF) by Beechcraft and the Globe Aircraft Corporation. It was used to train pilots for multi-engined aircraft such as bombers.
Development
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/eb/The_flag_of_the_United_States_and_colors_of_the_AAF_Training_Command_Pilot_School%2C_George_Field%2C_Ill%2C_flying_overhead%2C_the_AT-10s_flown_by_cadets_taking_advanced_training.jpg/220px-thumbnail.jpg)
Beechcraft began designing the Model 25 early in 1940 in response to the requirement of the then-named United States Army Air Corps (USAAC) for a small twin-engined aircraft suitable for use in training student pilots in the handling of multi-engined retractable landing gear aircraft. As there were concerns at the time about a future possible shortage of aluminium, part of the requirement was that the aircraft be built of "non-strategic" materials. Beechcraft met this requirement by designing the aircraft to be built primarily from wood. The Model 25 prototype was given to the USAAC for evaluation, but it was destroyed in a crash on May 5, 1941. The following day Beechcraft began work on the Model 26, which was soon ready, making its first flight on July 19 the same year. The type was accepted and deliveries began to the USAAF under the designation AT-10 in February 1942 at a time when US military fortunes were at their nadir. The type was named "Wichita" after Wichita, Kansas, the location of the Beechcraft factory. By the end of 1942 748 had been delivered and were playing a part in training crews for the vast fleets of bomber and transport aircraft that were pouring off factory production lines all over the United States. Beechcraft production terminated in 1943 after it had delivered 1,771 AT-10s. Globe Aircraft built another 600 before production finally ceased the following year.
Operators
Specifications
Data from American Warplanes of World War II [1]
General characteristics
- Crew: Two
- Length: 34 ft 4 in (10.46 m)
- Wingspan: 44 ft 0 in (13.41 m)
- Height: 10 ft 4 in (3.15 m) [2]
- Wing area: 298 sq ft (27.7 m2)
- Empty weight: 4,750 lb (2,155 kg)
- Max takeoff weight: 6,130 lb (2,781 kg)
- Powerplant: 2 × Lycoming R-680-9 air-cooled radial engines, 295 hp (220 kW) each
Performance
- Maximum speed: 198 mph (319 km/h, 172 kn)
- Range: 770 mi (1,240 km, 670 nmi)
- Service ceiling: 16,900 ft (5,200 m)
Restoration
AirCorps Aviation is creating an airworthy Beech AT-10 from four remaining aircraft. The restoration progress can be found at: http://www.at10wichita.com/
See also
Aircraft of comparable role, configuration, and era
Related lists
References
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- Notes
- ^ Donald 1995, p.8.
- ^ Air Force Museum Fact Sheet. National Museum of the US Air Force. Retrieved 4 Dec 2016.
- Bibliography
- Donald, David (editor.) American Warplanes of World War II. London:Aerospace Publishing, 1995. ISBN 1-874023-72-7.
- Phillips, Edward H., Beechcraft - Pursuit of Perfection, A History of Beechcraft Airplanes. Eagan, Minnesota:Flying Books, 1992. ISBN 0-911139-11-7.
- Taylor, M. J. H. ed. Jane's American Fighting Aircraft of the 20th Century Mallard Press. ISBN 0-7924-5627-0