Jump to content

Lotus Mark IX

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Mark viking (talk | contribs) at 04:30, 4 February 2020 (Adding short description: "Aluminium-bodied sports racing car" (Shortdesc helper)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lotus Mark IX
1954 Lotus Mark IX, Coventry Climax 1098 cc
beside a Lotus Mark VI
Overview
ManufacturerLotus Cars
Production1954–1955
DesignerColin Chapman
Body and chassis
ClassSports racing car
Body styleRoadster
LayoutFront engine, rear drive
PlatformTubular space frame
RelatedLotus Mark VI
Powertrain
EngineCoventry Climax 1098 cc
TransmissionManual 4-speed (MGTF)
Dimensions
Wheelbase7 feet 3.5 inches (2.22 m)
Length11 feet 7.5 inches (3.54 m)
Width4 feet 8 inches (1.42 m)
Height2 feet 3 inches (0.69 m)
Curb weight1,080 pounds (490 kg)
Chronology
PredecessorLotus Mark VIII
SuccessorLotus Eleven

The Lotus Mark IX (1955) was an aluminium-bodied sports racing car manufactured by Lotus Engineering Ltd.. About thirty of the Mark IX sports racing cars were made. It was closely related to the Lotus model Mark VIII (1954), of which only about seven cars were made. These cars were largely based on the innovative space frame of the Lotus Mark VI (1952). The highly aerodynamic bodies were designed by Frank Costin and constructed by Williams & Pritchard Limited.

During this early era, of 1954–1955, Lotus Engineering was still a fledgling company, and cars were delivered in different states of completion on special orders. Similar to the Mark VIII, the Mark IX was available in various configurations and different engines, including the 1500 cc MG, 1500 cc Connaught and 2-litre Bristol were fitted. However, the Mark IX designation is most often powered by the 1100 cc Coventry Climax engine. Apparently two models of Mark IX were offered – the "Club" and the "Le Mans", the latter of which had larger drum brakes fitted.

Lotus IX at a modern vintage race

The chassis of the Mark IX was a new design, compared to that of the Mark VIII. Both were space frames of welded steel tube. The new chassis was an advance over the Mark VIII in terms of the efficiency of its design and avoiding the VIII's need for diaphragm-stiffening panels. However, both chassis still used an oversized lower rail of 1.8-inch (5 cm) tube, a hang-over from the original design of the first Mark VI space frame.[1] Compared to the Mark VIII, the Mark IX was shortened somewhat to a wheelbase of 7 feet 3.5 inches (2.22 m), and the body itself was about two feet (0.6 m) shorter than that of the Mark VIII.

A total of about thirty of the Mark IX sports racing cars were produced in various forms, and these were successfully raced in both Europe and the US. The first two examples of the Mark IX were apparently delivered to the US with the 1100 cc Coventry Climax engine to compete in the 1955 running of the 12 Hours of Sebring race and were beaten by a Porsche Spyder. These cars were actually entered as Lotus Mark VIII models in the G class by Frank Miller of Larchmont, NY and by Bobby Burns and Norman J. Scott of Houston TX in, respectively, car numbers 78 and 79. The Lotus Works Team entered at least one Mark IX in the Le Mans 24 hour race in 1955, driven by Chapman, which may have been equipped with disc brakes. However, the car was disqualified apparently due to his reversing the car to re-enter the race track after going off course.

References

  1. ^ Ludvigsen, Karl (2010). Colin Chapman: Inside the Innovator. Haynes Publishing. p. 155. ISBN 1-84425-413-5.