MV Walla Walla

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by RevelationDirect (talk | contribs) at 19:55, 29 February 2020 (removed Category:Ships built in Washington (state); added Category:Ships built in Seattle using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The MV Walla Walla in Rich Passage
History
NameMV Walla Walla
OwnerWSDOT
OperatorWashington State Ferries
Port of registrySeattle, Washington, US
RouteEdmonds-Kingston
BuilderTodd Shipyard, Seattle
Completed
  • 1972
  • Refurbished: 2005[1]
In service1972
Identification
StatusIn Service
General characteristics
Class and typeJumbo-class auto/passenger ferry
Tonnage
  • 3,246 gross-tonnage
  • 1,198 net-tonnage
Displacement4860 (in long tons)
Length440 ft (134 m)
Beam87 ft (27 m)
Draft18 ft (5 m)
Decks4
Deck clearance15 ft 6 in (4.7 m)
Installed powerTotal 11,500 hp from 4 x Diesel-Electric engines
PropulsionDiesel Electric (DC)
Speed18 kn (33 km/h)
Capacity
  • 2,000 passengers
  • 188 vehicles (max 60 commercial)[2]
The MV Walla Walla, underway from Edmonds to Kingston

The MV Walla Walla is a Jumbo-class ferry operated by Washington State Ferries.

History

The Walla Walla was originally assigned to the San Juan Islands, however in its first year of service it was reassigned to the Seattle-Bainbridge route for which ridership better aligned with the high capacity of the Jumbo-class vessels.

After being replaced on the Seattle–Winslow route by the Jumbo Mark II-class ferry, the ship began serving as a fill-in vessel for whenever one of the larger ferries goes into scheduled maintenance periods; usually she can be found on either the SeattleBremerton or EdmondsKingston routes.[1] Occasionally the Walla Walla will still end up filling in on the Seattle–Bainbridge Island run where it spent its early years. In late July 2014, the Jumbo Mark II class ferry, MV Wenatchee went up to Vancouver, BC for repairs. Since Washington State Ferries had no large backup vessels, the Walla Walla once again found herself on her old run, the Seattle–Winslow route. As a result, she was the other vessel on the route on the day the MV Tacoma suffered her massive electrical failure.

November 2012 incident

In early November 2012, during routine maintenance, one of the ship's four drive motors was damaged and failed after it overheated. The ferry was removed from service while a replacement was installed. WSDOT announced that if the damaged motor could be replaced with a spare already in its warehouse, the ferry could be back into service within several months.[3][4] The spare motor was refurbished by General Electric in Los Angeles and then installed at Vigor Shipyards.[5] The Walla Walla returned to service in April 2013.[5]

References

  1. ^ a b c The Walla Walla, evergreenfleet.com
  2. ^ MV Walla Walla vessel info from WSDOT
  3. ^ Walla Walla ferry out of service indefinitely – Seattle Times, retrieved November 9, 2012
  4. ^ Electrical Accident Puts Walla Walla Ferry Out Of Service – KGMI, retrieved November 12, 2012
  5. ^ a b Frame, Susannah (March 11, 2013). "Report: Human error was cause of ferry maintenance accident". King5.com. Archived from the original on March 13, 2013.

External links