Jump to content

Brookville BL36PH

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Oshwah (talk | contribs) at 20:12, 22 March 2020 (Not added correctly; this breaks a template. (HG) (3.4.9)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Brookville BL36PH
A BL36PH in service for Tri-Rail
Type and origin
Power typeDiesel-electric
BuilderBrookville Equipment Corporation
ModelBL36PH
Build date2012-present
Total produced12
Specifications
Configuration:
 • AARB-B
 • UICBo'Bo'
Gauge4 ft 8+12 in (1,435 mm)
Wheel diameter40 in (1,016 mm)
Length67 ft 3.5 in (20.511 m)
Width10 ft 0 in (3.05 m) Over Carbody
10 ft 7 in (3.23 m) Over Handrails
Height14 ft 8 in (4.47 m) Over Carbody
15 ft 6 in (4.72 m) Overall
Loco weight289,000 lb (131,000 kg)
Fuel typeDiesel fuel
Fuel capacity2,300 US gal (8,700 L; 1,900 imp gal)
Prime moverMTU 20V 4000 R43
Engine typeV20 diesel
AspirationTurbocharged
Displacement95.4 liters (5,820 cu in)[1]
AlternatorKato 8P6.5-3400
Traction motorsEMD D-87 BTR
Cylinders20
Loco brakePneumatic and Dynamic
Performance figures
Maximum speed82 mph (132 km/h) (Tri-Rail)
Power output3,620 hp (2.70 MW)
Tractive effort72,000 lbf (320 kN) (starting)
64,800 lbf (288 kN) (continuous) at 14 mph (23 km/h)

The Brookville BL36PH is a four-axle diesel-electric locomotive for commuter trains, designed by Brookville Equipment Corporation.[2] It is built with an MTU 20V4000 V20 engine rated at 3,619 horsepower (2,699 kW) to meet EPA Tier 3 emissions standards.[2] It was the first North American passenger locomotive designed with a 20-cylinder engine since the EMD SDP45 and EMD FP45, originally built in the 1960s.[3] Head end power is generated by a separate, smaller diesel (Caterpillar C-18) gen-set and is rated at 500 kW (670 hp). The outer shell of the locomotive has been designed by Cesar Vergara,[2] who has also designed the outer shells of several other North American passenger locomotives, including the MPI MPXpress, the GE Genesis, the MPI HSP46 and the EMD F59PHI.[4]

Tri-Rail, a Florida commuter rail service operated by the South Florida Regional Transportation Authority, is the launch customer,[2] with an initial order for 10 locomotives and later an option order of 2 more locomotives. These locomotives replaced their older F40PHL-2, F40PH-2C and F40PH locomotives. The order had an option for 17 additional (now 15) locomotives,[2] up to four of which may be sold to Sound Transit,[5] operator of Sounder commuter rail service in Washington.

References

  1. ^ "Detail: MTU Online". MTU. Archived from the original on October 6, 2015. Retrieved October 6, 2015.
  2. ^ a b c d e "Brookville Equipment gets SRFTA order". RailwayAge Magazine. March 1, 2011. Archived from the original on July 15, 2011. Retrieved March 2, 2011.
  3. ^ Guss, Chris (November 2015). "20 cylinders and passenger trains". Trains. 75 (11): 22.
  4. ^ "Motive Power Projects". Vergara Studio. Archived from the original on July 17, 2011. Retrieved March 9, 2011.
  5. ^ "SFRTA approves locomotive purchase for Tri-Rail". Progressive Railroading. March 2, 2011. Retrieved March 3, 2011.