Active cable
![]() | This article contains wording that promotes the subject in a subjective manner without imparting real information. (June 2012) |
Active cables are copper cables for data transmission that use an electronic circuit to boost the performance of the cable. Without an electronic circuit a cable is considered a 'passive' cable. Passive cables are liable to degrade the data they carry, due to "channel impairments" including attenuation, crosstalk and group velocity distortion. In active cables, a circuit using one or several integrated circuits is embedded in the cable to compensate for some or all of these impairments. This active boosting allows cables to be more compact, thinner, longer and transmit data faster than their passive equivalents.
Active cables are used in enterprise networks which form the backbone of modern data communication systems, and also to interconnect consumer devices such as cameras, gaming consoles and HDTVs,
Embedding circuitry in cables can allow less copper to be used in cable production for the same performance, reducing the weight of the cable by as much as 80% and reducing size. Other benefits include longer reach and lower power consumption: active cables have demonstrated up to fivefold longer reach than simple passive cables, while consuming approximately 75% less power than comparable fiber-based interconnects.[1]
Technology
The active component in active cables is a semiconductor device which acts to boost the quality of the data signal. The most common technology used is equalization and de-skew,[citation needed] both forms of filtering and amplification which is applied to the signal before it leaves the connector at the end of the cable. In some cases, chips are used at both ends of an active cable where the first device actively boosts the signal before it is transmitted over the copper lines and the second chip improves the signal integrity before it leaves the end connector.
Consumer electronics
Consumer electronics trends are leaning towards miniaturization and connectivity. Because active cables are more compact and portable than passive cables, they are ideal for use with products such as smartphones, HDTVs, gaming consoles and DV cameras. DisplayPort is the latest consumer electronics standard that has enabled support for active cables by allocating power supply pins inside the connector. Active DisplayPort cables enable ultra-thin (32 AWG and thinner) and long-reach interconnects which are particularly valuable for the use with the miniature Mini DisplayPort form-factor.[2]
Enterprise and storage applications
Active cables play an important role in enterprise and storage applications due to the confined space and air-flow requirements in data centers and long reaches (up to 30 meters) required to make some of the rack-to-rack connections. Because active cables can facilitate thin cable gauges, a tighter bend radius results, which can give cables in these applications better routability and improved airflow.
Active cable adoption in data centers has been growing steadily. For example, as of 2010, half of SFP+ interconnect volume is in active cables (as opposed to passive copper cables and optical transceiver modules).[3] The advent of QSFP (Quad SFP) interconnects for 40 Gigabit Ethernet and InfiniBand is driving the widespread adoption of active cables in this form-factor as well.
Standards
Criticism
Opponents of active cable technology often criticize the fact that the electronics in an active cable design could be placed inside the connected devices instead, and an inexpensive passive cable used to connect the devices. Digital alternatives to using analog equalizers and impedance matching circuits to improve cable performance also exist, such as channel estimation or link adaptation.
Another criticism of active cables is that manufacturers may patent the electronics inside an active cable or even utilize on-chip cryptography to prevent competitors or consumers from producing their own replacement cables, and therefore enable manufacturers to monopolize the market for cables and charge consumers exorbitant prices. Active cables typically cost 5 to 10 times more than their passive counterparts.[4] Some active cables are only produced by a single manufacturer, and sold through a single distributor. Low cable cost and high availability is desirable because cables are often inadvertently lost or damaged.
Some opponents of active cables also believe that active cables do not provide power savings for signal processing reasons, because in an active cable design, there is at least one extra integrated circuit compared to passive cable designs. This extra IC must be powered separately, when in a passive cable design, the signal processing can be integrated onto a single chip.
Benefits
Active cables offer benefits over their passive equivalents:
- Cables support much longer reach[5]
- Cables become thinner, lighter, more flexible and more compact[citation needed]
- Cables have a tighter bend radius[citation needed]
- Cables can be more easily routed[citation needed]
- Cable conduits are smaller, allowing for better air flow[citation needed]
- An overall improvement in signal integrity[citation needed]
- Cables require less signal processing by the host system, leading to savings in power consumption[citation needed] and cost.[citation needed]
See also
- Thunderbolt
- Parallel optical interface
- Interconnect bottleneck
- Optical communication
- Optical cable
- Green computing
- InfiniBand
- Fibre Channel
- HDMI
- PCI Express
- Small form-factor pluggable transceiver
- Terabit Ethernet
- 100 Gigabit Ethernet
- 10 Gigabit Ethernet
- Optoelectronics
- Data center
- High-performance computing
- Cloud computing
- CXP (connector)
- C Form-factor Pluggable
- Fiber-optic communication
- Optical link
- List of device bandwidths
References
- ^ G. Oganessyan, Active Cable Interconnects for High-Speed Serial Communications, DesignCon Conference proceedings, February 2010
- ^ Intersil Unveils Long-Haul Mini DisplayPort Video HyperWall Interconnects, January 2010
- ^ Where will the Chips Land? – Future of Active Copper and Active Optical Networking Cable Assemblies, archived from the original on 2010-08-16
- ^ Apple Thunderbolt Cable
- ^ DisplayPort Alt Mode 2.0 Spec Released