Jump to content

Debug (command)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ghettoblaster (talk | contribs) at 17:02, 30 May 2020. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Debug
Original author(s)Tim Paterson
Developer(s)Microsoft, IBM, Digital Research, Novell, Caldera
Operating systemDOS, OS/2, Windows
TypeDebugger
WebsiteDEBUG

The line-oriented debugger DEBUG is an external command in operating systems such as DOS, OS/2 and Windows (only in 16-bit/32-bit versions[1]).

DEBUG can act as an assembler, disassembler, or hex dump program allowing users to interactively examine memory contents (in assembly language, hexadecimal or ASCII), make changes, and selectively execute COM, EXE and other file types. It also has several subcommands which are used to access specific disk sectors, I/O ports and memory addresses.

Overview

DEBUG.COM in IBM PC DOS 1.0
The Microsoft Windows 95 debug command

Traditionally, all computers and operating systems have included a maintenance function, used to determine whether a program is working correctly.[citation needed] DEBUG was originally written by Tim Paterson to serve this purpose in 86-DOS. When Paterson began working for Microsoft in the early 1980s he brought the program with him. DEBUG was part of DOS 1.00 and has been included in MS-DOS/PC DOS and certain versions of Microsoft Windows. Originally named DEBUG.COM, the executable was renamed into DEBUG.EXE with DOS 5.0[2].

Windows XP and later versions included DEBUG for the MS-DOS subsystem to maintain MS-DOS compatibility. The 16-bit DOS commands are not available on 64-bit editions of Windows.[3]

The MS-DOS/PC DOS DEBUG has several limitations:

Enhanced DEBUG packages include the DEBUG command in Novell DOS 7, OpenDOS 7.01 and DR-DOS 7.02 and higher, a reimplementation of Digital Research's former Symbolic Instruction Debugger SID/SID86,[4] which came with former versions of DR DOS.[5][6][7] It is fully compatible with the DEBUG command line syntax of MS-DOS/PC DOS, but offers many enhancements, including supporting 16-bit and 32-bit opcodes up to the Pentium, an extended mode (/X) with dozens of additional commands and sub-modes, a much enhanced command line syntax with user-definable macros and symbolic debugging facilities with named registers, loaded symbol tables, mathematical operations and base conversions, as well as a commenting disassembler.[8][7] Some versions also utilized DPMS to function as a "stealth mode" protected-mode debugger.[9]

The FreeDOS version of DEBUG was developed by Paul Vojta.[10]

A 32-bit clone "DEBUGX" version supporting 32-bit DPMI programs exists as well.[11] Andreas "Japheth" Grech, the author of the HX DOS extender, developed enhanced DEBUG versions 0.98 to 1.25, and former PC DOS developer Vernon C. Brooks added versions 1.26 to 1.32.[12]

Syntax

DEBUG [[drive:][path] filename [parameters]]

When DEBUG is started without any parameters the DEBUG prompt, a "-" appears. The user can then enter one of several one or two-letter subcommands, including "A" to enter the assembler mode, "D" to perform a hexadecimal dump, "T" to trace and "U" to unassemble (disassemble) a program in memory.[13] DEBUG can also be used as a "DEBUG script" interpreter using the following syntax. 

DEBUG < filename

A script file may contain DEBUG subcommands and assembly language instructions.[14] This method can be used to create or edit binary files from batch files.[2]

Using for non-debugging purposes

The DEBUG utility is useful for editing binary files in an environment where only DOS is installed without anything else. It can also be used to edit disk sectors, which is one method of removing boot-sector viruses.

DEBUG in other operating systems

The operating systems Intel ISIS-II[15] and iRMX 86,[16] DEC TOPS-10[17] and TOPS-20,[18] THEOS/OASIS,[19] Zilog Z80-RIO,[20] Stratus OpenVOS,[21] PC-MOS,[22] and AROS[23] also provide a DEBUG command.

See also

References

  1. ^ According to Microsoft Macro Assembler Reference, inline assembly is not supported for x64.
  2. ^ a b Sedory, Daniel B. "A Guide to DEBUG". Retrieved 2014-11-29.
  3. ^ MS-DOS subsystem commands
  4. ^ SID-86 User's Guide for CP/M-86 (2 ed.). Digital Research. August 1982 [March 1982]. SID86UG.WS4. Archived from the original on 2019-10-20. Retrieved 2020-02-06. [1] (NB. A retyped version of the manual by Emmanuel Roche with Q, SR, and Z commands added. This manual is for the CP/M-86 version, but the DR DOS version is similar.)
  5. ^ Born, Günter [in German] (1993). DOS 6 Tuning (in German) (1 ed.). Markt & Technik. ISBN 3-87791-495-0. (NB. Has several pages on MS-DOS DEBUG.EXE as well as on the Symbolic Instruction Debugger SID.EXE in DR DOS 5.0/6.0.)
  6. ^ Paul, Matthias R. (1997-05-24) [1991]. DRDOSTIP.TXT — Tips und Tricks für DR DOS 3.41 - 5.0 (in German) (47 ed.). Archived from the original on 2016-11-07. Retrieved 2016-11-07. {{cite book}}: |work= ignored (help) (NB. Has some information on Symbolic Instruction Debugger (SID86.EXE in DR DOS 3.41 and SID.EXE in DR DOS 5.0/6.0), the predecessor of the DR-DOS DEBUG.EXE.)
  7. ^ a b Paul, Matthias R. (2002-01-09). "SID86". Newsgroup: comp.os.cpm. Retrieved 2018-04-08. […] Since the DR-DOS 7.03 DEBUG is still based on the old SID86.EXE, I suggest to run DEBUG 1.51 and enter the extended help system with ?? from the debug prompt. This will give you eight screens full of syntax and feature help. Some of these features were also supported by older issues. […]{{cite newsgroup}}: CS1 maint: url-status (link)
  8. ^ Paul, Matthias R. (1997-07-30). "Kapitel II.5. Allgemeines: Undokumentierte Möglichkeiten von DEBUG" [Undocumented features of DEBUG]. NWDOS-TIPs — Tips & Tricks rund um Novell DOS 7, mit Blick auf undokumentierte Details, Bugs und Workarounds. Release 157 (in German) (3 ed.). Archived from the original on 2017-09-10. Retrieved 2014-09-06. {{cite book}}: |work= ignored (help) (NB. NWDOSTIP.TXT is a comprehensive work on Novell DOS 7 and OpenDOS 7.01, including the description of many undocumented features and internals. It is part of the author's yet larger MPDOSTIP.ZIP collection maintained up to 2001 and distributed on many sites at the time. The provided link points to a HTML-converted older version of the NWDOSTIP.TXT file.)
  9. ^ Paul, Matthias R. (2001-04-09). NWDOS-TIPs — Tips & Tricks rund um Novell DOS 7, mit Blick auf undokumentierte Details, Bugs und Workarounds. Release 183 (in German) (3 ed.). {{cite book}}: |work= ignored (help)
  10. ^ http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/1.2/repos/pkg-html/debug.html
  11. ^ Vojta, Paul. "DEBUG README". Archived from the original on 2007-08-24. Retrieved 2007-06-25.
  12. ^ Brooks, Vernon C. (2014-04-08). "Enhanced DEBUG for PC DOS and MS-DOS". PC DOS Retro. Archived from the original on 2020-02-21. Retrieved 2014-05-08.
  13. ^ "Microsoft TechNet Debug article". Retrieved 2008-04-23.
  14. ^ Irvine, Kip R. (2010). "Using Debug". Assembly language for Intel-based computers (PDF) (6th ed.). Prentice Hall. ISBN 978-0-13602212-1. Retrieved 2014-03-18.
  15. ^ ISIS II Users Guide
  16. ^ iRMX 86 Introduction And Operator's Reference Manual For Release 6
  17. ^ TOPS-10 Operating System Commands Manual (pdf). Digital Equipment Corporation. August 1980. Retrieved 2019-02-17.
  18. ^ "TOPS-20 Command manual" (PDF).
  19. ^ THEOS/OASIS User′s Handbook
  20. ^ Z80-RIO Operating System User's Manual
  21. ^ http://stratadoc.stratus.com/vos/19.1.0/r098-19/wwhelp/wwhimpl/common/html/r098-19.pdf
  22. ^ PC-MOS User Guide
  23. ^ http://aros.sourceforge.net/documentation/users/shell/index.php
Wikibooks has a book on the topic of: Guide to Windows Commands
Retrieved from "https://en.wikipedia.org/w/index.php?title=Debug_(command)&oldid=959790854"