Jump to content

Consolidated PT-3

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Nigel Ish (talk | contribs) at 19:23, 5 November 2020 (Operators). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

PT-3
Consolidated PT-3
Role Trainer
Manufacturer Consolidated Aircraft Company
Introduction 1927
Primary user United States Army Air Corps
Produced September 1927
Number built 250
Variants Consolidated NY, Consolidated O-17
PT-3

The Consolidated Model 2 was a training airplane used by the United States Army Air Corps, under the designation PT-3 and the United States Navy under the designation NY-1.

Development

Seeing the success of the Navy's NY-1 modification of a PT-1 airframe, the USAAC came to the conclusion that a radial engine was indeed ideal for a trainer. It was reliable and offered a good power-to-weight ratio. Therefore, one PT-1 airframe was completed as XPT-2 with a 220 hp (164 kW) Wright J-5 Whirlwind radial engine.[1]

The XPT-3 was almost identical to the XPT-2 except for the tail, revised wing panels and different shape. 130 production PT-3 aircraft were ordered in September 1927,[1] with one being completed as the XO-17. These were followed by 120 PT-3A aircraft with minor changes. The XPT-3 became the XPT-5 when fitted with the Curtiss Challenger R-600 two-row six-cylinder radial engine, but was soon converted to PT-3 standard.[2]

The PT-3 aircraft were superseded by the Boeing PT-13 Stearman starting in 1937, but a number were still operational with the Spartan Flying School in Tulsa Oklahoma into the middle of World War II.[1]

Variants

XPT-2
one PT-1 airframe with a 220 hp (160 kW) Wright J-5 (R-790) radial engine, wingspan 34 ft 7 in (10.5 m), length 28 ft 4 in (8.6 m), gross weight 2,427 lb (1100 kg)[3]
XPT-3
one PT-1 airframe with revised wing panels (Clark "Y" wings) and a different vertical tail, wingspan 34 ft 6 in (10.5 m), length 28 ft 3 in (8.6 m), gross weight 2,439 lb (1106 kg)[3]
PT-3
130 ordered, one completed as the XO-17 prototype, gross weight 2,481 lb (1125 kg)[3]
PT-3A
120 ordered with minor updates, Wright J-5, gross weight 2,432 lb (1103 kg)[3]
XPT-4
unbuilt, was to be a development PT-3 with the experimental Fairchild-Caminez 447C engine[3]
XPT-5
the airframe of the XPT-3 was temporarily fitted with the Curtiss Challenger R-600-1 two-row six-cylinder radial engine in 1929, later converted to PT-3 standard[3]

Operators

 Cuba
 Argentina
 Brazil
 Peru
 Mexico
 United States

Specifications (PT-3)

Data from "United States Military Aircraft Since 1908" by Gordon Swanborough & Peter M. Bowers (Putnam Newy York, ISBN 0-370-00094-3) 1977, 675 pp.

General characteristics

  • Crew: two

Performance

See also

References

  1. ^ a b c "The Complete Encyclopedia of World Aircraft" cover Editors: Paul Eden & Soph Moeng, (Amber Books Ltd. Bradley's Close, 74-77 White Lion Street, London, NI 9PF, 2002, ISBN 0-7607-3432-1), 1152 pp.
  2. ^ "United States Military Aircraft Since 1909" by F. G. Swanborough & Peter M. Bowers (Putnam New York, ISBN 0-85177-816-X) 1964, 596 pp.
  3. ^ a b c d e f "U.S. Army Aircraft 1908-1946" by James C. Fahey, 1946, 64pp.
  4. ^ Hagedorn 1993, p. 10
  • Hagedorn, Daniel P. (1993). Central American and Caribbean Air Forces. Tonbridge, Kent, UK: Air-Britain (Historians) Ltd. ISBN 0-85130-210-6.

Media related to Consolidated PT-3 at Wikimedia Commons