Jump to content

Flume Formation

Coordinates: 53°10′N 117°55′W / 53.167°N 117.917°W / 53.167; -117.917 (Flume Formation)
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Tisquesusa (talk | contribs) at 14:01, 31 December 2020. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Flume Formation
Stratigraphic range: Frasnian
TypeFormation
Unit ofFairholme Group
UnderliesCairn Formation
OverliesCambrian or Ordovician formations, or Yahatinda Formation
ThicknessUp to 125 m (410 ft)
Lithology
PrimaryDolomite
OtherChert, limestone
Location
Coordinates53°10′N 117°55′W / 53.167°N 117.917°W / 53.167; -117.917 (Flume Formation)
Approximate paleocoordinates13°00′S 44°06′W / 13.0°S 44.1°W / -13.0; -44.1
Region Alberta
Country Canada
ExtentWestern Canada Sedimentary Basin
Type section
Named byP.E. Raymond
Year defined1930[1]
Flume Formation is located in Canada
Flume Formation
Flume Formation (Canada)
Flume Formation is located in Alberta
Flume Formation
Flume Formation (Alberta)

The Flume Formation is a geologic formation in the Western Canada Sedimentary Basin in Alberta, Canada. It was deposited as an extensive carbonate platform along the western edge of the basin during Late Devonian (Frasnian) time and the reefs of the Cairn Formation subsequently developed on it.[2][3]

Lithology

The Flume Formation was deposited as limestone, but it was strongly dolomitized during diagenesis, and it now consists primarily of dark grey, medium-to thick-bedded, fine to medium crystalline dolomite. It includes abundant dark grey chert nodules and stringers, as well as scattered stromatoporoids and Amphipora. It is distinguished from the overlying Cairn Formation by its higher chert content and lower fossil content. In areas where it is overlain by Cairn Formation reefs the Flume may be classified as the lower member of the Cairn Formation, but where the Cairn is absent the Flume has formation rank.[3]

Thickness and distribution

The Flume Formation reaches thicknesses of up to 125 m (410 ft).[3] It has been exposed by thrust faulting in the main and front ranges of the Canadian Rockies in a belt extending from the Kakwa Lakes area in northeastern British Columbia to south of the Bow River in Alberta.[2][3]

Relationship to other units

The Flume Formation rests unconformably on formations of late Cambrian to Ordovician age or, in parts of the mountains and foothills, on the Middle Devonian Yahatinda Formation. It is conformably overlain by the reefs of the Cairn Formation, or where they are absent, by the Southesk Formation. It is equivalent in part to the upper Beaverhill Lake Group farther to the east.[3][4]

Fossil content

The formation has provided fossils of:[5]

Brachiopods
Corals
Flora

See also

References

  1. ^ Raymond, P.E. 1930. The Paleozoic Formations in Jasper Park, Alberta. American Journal of Science, 5th series, vol. 20, p. 289-300
  2. ^ a b Mossop, G.D. and Shetsen, I., (compilers), Canadian Society of Petroleum Geologists and Alberta Geological Survey (1994). "The Geological Atlas of the Western Canada Sedimentary Basin, Chapter 12: Devonian Woodbend-Winterburn strata of the Western Canada Sedimentary Basin". Archived from the original on 2014-10-18. Retrieved 2014-10-17.{{cite web}}: CS1 maint: multiple names: authors list (link)
  3. ^ a b c d e Glass, D.J. (editor) 1997. Lexicon of Canadian Stratigraphy, vol. 4, Western Canada including eastern British Columbia, Alberta, Saskatchewan and southern Manitoba, p. 466-467. Canadian Society of Petroleum Geologists, Calgary, 1423 p. on CD-ROM. ISBN 0-920230-23-7.
  4. ^ Alberta Geological Survey. "Alberta Table of Formations, May 2019" (PDF). Alberta Energy Regulator. Retrieved 24 March 2020.
  5. ^ Flume Formation at Fossilworks.org