Jump to content

ABISMO

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Yobot (talk | contribs) at 21:44, 5 March 2016 (WP:CHECKWIKI error fixes / ISSN syntax fixes using AWB (11964)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

[[File:Click here to see an image of ABISMO and its launcher, as well as RV Kairei, the support ship.|300px|upright=1]]
ABISMO
History
Japan
NameABISMO
OwnerThe Japan Agency for Marine-Earth Science and Technology (JAMSTEC)
OperatorJAMSTEC
BuilderJAMSTEC
Maiden voyage2007
In service2007
HomeportYokosuka, Kanagawa, Japan
General characteristics
Typeremotely operated underwater vehicle
Tonnage300kg in the air[1]
Displacement100kg in the water[1]
Length1.3 m (4 ft 3 in)[1]
Height1.1 m (3 ft 7 in)[1]
Installed powerelectrical (Lithium-ion batteries)
PropulsionThrusters (Longitudinal direction: 400W×4 sets, Transverse direction: 400W×2 sets), Crawler (Longitudinal direction 400W×2sets)[1]
Test depth11,000 meters
Complementunmanned
Sensors and
processing systems
side-scan sonar, NTSC type color TV×1channel & search lights[1]

ABISMO (Automatic Bottom Inspection and Sampling Mobile) is a remotely operated underwater vehicle (ROV) built by the Japan Agency for Marine-Earth Science and Technology (JAMSTEC) for exploration of the deep sea. It is the only remaining ROV rated to 11,000-meters (after Nereus, built and operated by the Woods Hole Oceanographic Institution was lost at sea in 2014), ABISMO is intended to be the permanent replacement for Kaikō, a ROV that was lost at sea in 2003.

Kaikō

Between 1995 and 2003, Kaikō conducted more than 250 dives, collecting 350 biological species (including 180 different bacteria), some of which could prove to be useful in medical and industrial applications.[2] Kaikō reached a maximum depth of 10,911.4 meters at the Challenger Deep on 24 March 1995, during its initial sea trials.[3][4][5] Kaikō returned to Challenger Deep in February 1996, this time reaching a maximum depth of 10,898 meters.[6][7] Kaikō made its last visit to Challenger Deep in May 1998. On 29 May 2003, Kaikō was lost at sea off the coast of Shikoku Island during Typhoon Chan-Hom, when a steel secondary cable connecting it to its launcher at the ocean surface broke.[8] In May 2004, JAMSTEC resumed its research operations, using a converted ROV as its vehicle. This ROV, formerly known as UROV 7K, was rechristened Kaikō7000II. The 7000 designation indicates that this vessel is rated for diving to a maximum depth of 7,000 meters.

RV Kairei

RV Kairei

RV Kairei (かいれい) is a deep sea research vessel that served as the support ship for Kaikō, and for its replacement ROV, Kaikō7000II. It now serves as the support ship for ABISMO. Kairei uses ABISMO to conduct surveys and observations of oceanic plateaus, abyssal plains, oceanic basins, submarine volcanoes, hydrothermal vents, oceanic trenches and other underwater terrain features to a maximum depth of 11,000 meters. Kairei also conducts surveys of the structure of deep sub-bottoms with complicated geographical shapes in subduction zones using its on-board multi-channel reflection survey system.[9]

Development of ABISMO

While the temporary replacement ROV (Kaikō7000II) has a remarkable performance record, it is only rated to 7,000 meters and cannot reach the deepest oceanic trenches. For this reason, JAMSTEC engineers began work on a new 11,000-meter class of ROV in April 2005.[8][10] The project is called ABISMO (Automatic Bottom Inspection and Sampling Mobile), which translates to abyss in Spanish and Portuguese.

Like Kaikō, ABISMO consists of 4 major parts:[10]

  1. electronic instruments aboard RV Kairei, the support ship
  2. Launcher (a sampling station)
  3. Vehicle (a sediment probe)
  4. Samplers (a gravity corer or Smith Macintyre type sampler)

Except for the sampler and the smaller size of the ROV itself, the system configuration is the same as for Kaikō. The launcher launches and recovers the ROV along with its sampler. Click here to see a photograph of ABISMO and its launcher, as well as RV Kairei, the support ship.

The lower part of the launcher is constructed of a stainless steel framework, within which the vehicle is stored. Pressure hulls for electronic devices, a winch, a secondary cable drum and two electric transformers are located in the upper part of the launcher. The samplers include a gravity core sampler and a bottom grab sampler. There is also a docking system and an acoustic positioning system in the lower part of the launcher. The vehicle is hung in the launcher by the docking system. When the system detaches it and the cable drum feeds the secondary cable, the vehicle can dive down, and its position is measured by the acoustic positioning system. The position of the launcher is measured by RV Kairei, the support ship. The launcher also has a high-definition television (HDTV) camera with pan and tilt functions.[8]

Initial sea trials of ABISMO were conducted in 2007. The craft successfully reached a planned depth of 9,760-meters, the deepest part of Izu-Ogasawara Trench, where it collected core samples of sediment from the seabed.[8][10] Plans are underway for a mission to the Challenger Deep.[citation needed]

See also

References

  1. ^ a b c d e f Shinji Oshima (18 December 2007). "The Automatic Bottom Inspection and Sampling Mobile "ABISMO" Succeeds to dive to a depth of 9,707m at the actual test diving". Yokosuka, Kanagawa, Japan: The Japan Agency for Marine-Earth Science and Technology. Retrieved 27 June 2010. {{cite web}}: External link in |publisher= (help)
  2. ^ Suvendrini Kakuchi (21 July 2003). "The Underwater Wonders Revealed by Kaiko". Tierramérica: Environment & Development. Retrieved 27 June 2010. {{cite web}}: External link in |publisher= (help)
  3. ^ "Robot sub reaches deepest ocean". BBC News. 3 June 2009. Retrieved 27 June 2010.
  4. ^ M. Kyo, E. Hiyazaki, S. Tsukioka, H. Ochi, Y. Amitani, T. Tsuchiya, T. Aoki and S. Takagawa (October 1995). "The sea trial of "Kaiko", the full ocean depth research ROV". Oceans '95. MTS/IEEE. Challenges of Our Changing Global Environment (Conference Proceedings). Vol. 3. San Diego, CA. pp. 1991–1996. doi:10.1109/OCEANS.1995.528882. ISBN 0-933957-14-9.{{cite book}}: CS1 maint: location missing publisher (link) CS1 maint: multiple names: authors list (link)
  5. ^ JAMSTEC (2007). "Maximum depth reached by Kaikō". Yokosuka, Japan: Japan Agency for Marine-Earth Science and Technology. Archived from the original on 15 June 2010. Retrieved 27 June 2010. {{cite web}}: External link in |publisher= (help); Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  6. ^ Y. Nogi and Chiaki Kato (January 1999). "Taxonomic studies of extremely barophilic bacteria isolated from the Mariana Trench and description of Moritella yayanosii sp. nov., a new barophilic bacterial isolate". Extremophiles. 3 (1): 71–77. doi:10.1007/s007920050101. PMID 10086847. Retrieved 27 June 2010.
  7. ^ Chiaki Kato, Lina Li, Yuichi Nogi, Yuka Nakamura, Jin Tamaoka, and Koki Horikoshi (April 1998). "Extremely Barophilic Bacteria Isolated from the Mariana Trench, Challenger Deep, at a Depth of 11,000 Meters". Appl Environ Microbiol. 64 (4): 1510–1513. PMC 106178. PMID 9546187. Retrieved 27 June 2010.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  8. ^ a b c d Shojiro Ishibashi and Hiroshi Yoshida (March 2008). "Developing a Sediment Sampling ROV for the Deepest Ocean". Sea Technology. Retrieved 27 June 2010.
  9. ^ JAMSTEC (2007). "Deep Sea Research Vessel KAIREI". Yokosuka, Japan: Japan Agency for Marine-Earth Science and Technology. Retrieved 27 June 2010. {{cite web}}: External link in |publisher= (help)
  10. ^ a b c Kazuaki Itoh, Tomoya Inoue, Junichiro Tahara, Hiroyuki Osawa, Hiroshi Yoshida, Shojiro Ishibashi, Yoshitaka Watanabe, Takao Sawa, Taro Aoki (10–14 November 2008). "Sea Trials of the New ROV ABISMO to Explore the Deepest Parts of Oceans". Proceedings of the Eighth (2008) ISOPE Pacific/Asia Offshore Mechanics Symposium (PDF). Bangkok, Thailand: The International Society of Offshore and Polar Engineers. p. 1. ISBN 978-1-880653-52-4. Retrieved 27 June 2010.{{cite book}}: CS1 maint: multiple names: authors list (link)

Further reading