Jump to content

Aircraft emergency frequency

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DocWatson42 (talk | contribs) at 05:33, 28 June 2014 (Locating beacons: Performed clean up.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The aircraft emergency frequency (also known as guard) is a frequency used on the aircraft band reserved for emergency communications for aircraft in distress. The frequencies are 121.5 MHz for civilian, also known as International Air Distress (IAD) or VHF Guard, and 243.0 MHz for military use, also known as Military Air Distress (MAD) or UHF Guard. Earlier emergency locator transmitters used the guard frequencies to transmit, but an additional frequency of 406 MHz is used by more modern ELTs.

History

The choice of 121.5 MHz was made by the ICAO in conjunction with ARINC and the ITU.

Monitoring

The main civil voice frequency 121.5 MHz is monitored by most air traffic control towers, FSS services, national air traffic control centers, and other flight and emergency services, as well as by many commercial aircraft.

In the UK, 121.5 MHz is monitored by the Royal Air Force Distress and Diversion cells (known as "D&D") at the London Terminal Control Centre and the Shanwick Oceanic Control, from a nationwide network of antennas. Depending on the aircraft's altitude and location, the personnel in the centres may be able to use triangulation to determine its exact position which can be useful to the pilot if the aircraft is lost or "temporarily unsure of position".

Use

Both guard frequencies can be used by any aircraft in distress or an emergency and in addition it can be used by air traffic control to warn aircraft if they are about to fly into restricted or prohibited airspace.

Aircraft will also be contacted on 121.5 MHz when intercepted by air defence aircraft, to ask for identification and intentions and to pass on instructions.

Locating beacons

Older emergency locator transmitters transmit on 121.5 MHz in case of impact. Newer ELTs transmit on 406 MHz, with a low power beacon on 121.5 MHz for local homing. Satellites listen for the signals and alert local personnel to the emergency, and the beacon allows search and rescue to find the scene of the accident faster. Beacons operating at 406 MHz are encoded, allowing the vessel of origin to be determined and false alarms to be quickly verified. Satellite support for the 121.5 MHz–only versions was discontinued in early 2009.[1][2]

See also

References

  1. ^ "Emergency Beacons". NOAA.
  2. ^ "EMERGENCY POSITION INDICATING RADIOBEACON (EPIRB)". U.S. Coast Guard.