Jump to content

Bavarian Pt 2/5 H

From Wikipedia, the free encyclopedia
Bavarian Pt 2/5 H
DRG Class 73.2
Type and origin
BuilderKrauss
Build date1906
Total produced1
Specifications
Configuration:
 • Whyte2-4-4T
Gauge1,435 mm (4 ft 8+12 in)
Leading dia.1,006 mm (3 ft 3+58 in)
Driver dia.1,640 mm (5 ft 4+58 in)
Trailing dia.1,006 mm (3 ft 3+58 in)
Length:
 • Over beams11,894 mm (39 ft 14 in)
Axle load16.0 t (15.7 long tons; 17.6 short tons)
Adhesive weight32.0 t (31.5 long tons; 35.3 short tons)
Service weight70.7 t (69.6 long tons; 77.9 short tons)
Boiler pressure12 kgf/cm2 (1,180 kPa; 171 lbf/in2)
Heating surface:
 • Firebox1.96 m2 (21.1 sq ft)
 • Evaporative89.07 m2 (958.7 sq ft)
Superheater:
 • Heating area20.19 m2 (217.3 sq ft)
Cylinders2
Cylinder size500 mm (19+1116 in)
Piston stroke560 mm (22+116 in)
Performance figures
Maximum speed90 km/h (56 mph)
Career
Numbers
  • K.Bay.Sts.E: 5201
  • DRG: 73 201
Retired1933

The Bavarian Class Pt 2/5 H locomotive of the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn) was built by Krauss for the Nuremberg Trade Fair in 1906. Because this locomotive could no longer fully meet the performance requirements at that time, it remained a one-off. It was nevertheless taken over by the Reichsbahn and retired in 1933. The loco had a superheated steam system.

The engine was scrapped after retirement.

See also

[edit]

References

[edit]
  • Hütter, Ingo (2021). Die Dampflokomotiven der Baureihen 60 bis 91 der DRG, DRB, DB, und DR (in German). Werl: DGEG Medien. p. 93. ISBN 978-3-946594-21-5.
  • Weisbrod, Manfred; Müller, Hans; Petznik, Wolfgang (1978). Dampflokomotiven deutscher Eisenbahnen, Baureihe 60–96 (EFA 1.3) (in German) (4th ed.). Düsseldorf: Alba. pp. 58–65. ISBN 3-87094-083-2.