|from kelvins||to kelvins|
|Celsius||[°C] = [K] − 273.15||[K] = [°C] + 273.15|
|Fahrenheit||[°F] = [K] × 9⁄5 − 459.67||[K] = ([°F] + 459.67) × 5⁄9|
|Rankine||[°R] = [K] × 9⁄5||[K] = [°R] × 5⁄9|
|For temperature intervals rather than specific temperatures,
1 K = 1 °C = 9⁄5 °F = 9⁄5 °R
Comparisons among various temperature scales
The Kelvin scale is an absolute thermodynamic temperature scale using as its null point absolute zero, the temperature at which all thermal motion ceases in the classical description of thermodynamics. The kelvin (symbol: K) is the base unit of temperature in the International System of Units (SI). The kelvin is defined as the fraction 1⁄273.16 of the thermodynamic temperature of the triple point of water (exactly 0.01 °C or 32.018 °F). In other words, it is defined such that the triple point of water is exactly 273.16 K.
The Kelvin scale is named after the Belfast-born, Glasgow University engineer and physicist William Thomson, 1st Baron Kelvin (1824–1907), who wrote of the need for an "absolute thermometric scale". Unlike the degree Fahrenheit and degree Celsius, the kelvin is not referred to or typeset as a degree. The kelvin is the primary unit of temperature measurement in the physical sciences, but is often used in conjunction with the degree Celsius, which has the same magnitude. The definition implies that absolute zero (0 K) is equivalent to −273.15 °C (−459.67 °F).
In 1848, William Thomson, who later received the title Lord Kelvin, wrote in his paper, On an Absolute Thermometric Scale, of the need for a scale whereby "infinite cold" (absolute zero) was the scale's null point, and which used the degree Celsius for its unit increment. Kelvin calculated that absolute zero was equivalent to −273 °C on the air thermometers of the time. This absolute scale is known today as the Kelvin thermodynamic temperature scale. Kelvin's value of "−273" was the negative reciprocal of 0.00366—the accepted expansion coefficient of gas per degree Celsius relative to the ice point, giving a remarkable consistency to the currently accepted value.
In 1954, Resolution 3 of the 10th General Conference on Weights and Measures (CGPM) gave the Kelvin scale its modern definition by designating the triple point of water as its second defining point and assigned its temperature to exactly 273.16 kelvins.
In 1967/1968 Resolution 3 of the 13th CGPM renamed the unit increment of thermodynamic temperature "kelvin", symbol K, replacing "degree Kelvin", symbol °K. Furthermore, feeling it useful to more explicitly define the magnitude of the unit increment, the 13th CGPM also held in Resolution 4 that "The kelvin, unit of thermodynamic temperature, is equal to the fraction 1⁄273.16 of the thermodynamic temperature of the triple point of water."
In 2005 The Comité International des Poids et Mesures (CIPM), a committee of the CGPM, affirmed that for the purposes of delineating the temperature of the triple point of water, the definition of the Kelvin thermodynamic temperature scale would refer to water having an isotopic composition specified as VSMOW.
When spelled out or spoken, the unit is pluralised using the same grammatical rules as for other SI units such as the volt or ohm (e.g. "the triple point of water is exactly 273.16 kelvins"). When reference is made to the "Kelvin scale", the word "kelvin"—which is normally a noun—functions adjectivally to modify the noun "scale" and is capitalized. As with most other SI unit symbols (angle symbols, e.g. 45° 3′ 4″, are the exception) there is a space between the numeric value and the kelvin symbol (e.g. "99.987 K").
Before the 13th CGPM in 1967–1968, the unit kelvin was called a "degree", the same as with the other temperature scales at the time. It was distinguished from the other scales with either the adjective suffix "Kelvin" ("degree Kelvin") or with "absolute" ("degree absolute") and its symbol was °K. The latter term (degree absolute), which was the unit's official name from 1948 until 1954, was ambiguous since it could also be interpreted as referring to the Rankine scale. Before the 13th CGPM, the plural form was "degrees absolute". The 13th CGPM changed the unit name to simply "kelvin" (symbol: K). The omission of "degree" indicates that it is not relative to an arbitrary reference point like the Celsius and Fahrenheit scales (although the Rankine scale continued to use "degree Rankine"), but rather an absolute unit of measure which can be manipulated algebraically (e.g. multiplied by two to indicate twice the amount of "mean energy" available among elementary degrees of freedom of the system).
Use in conjunction with degrees Celsius
In science and engineering, degrees Celsius and kelvins are often used simultaneously in the same article, where absolute temperatures are given in degrees Celsius, but temperature intervals are given in kelvins. E.g. "its measured value was 28 °C with an uncertainty of 60 µK." 0.010
This practice is permissible because the degree Celsius is a special name for the kelvin for use in expressing relative temperatures, and the magnitude of the degree Celsius is exactly equal to that of the kelvin. Notwithstanding that the official endorsement provided by Resolution 3 of the 13th CGPM states "a temperature interval may also be expressed in degrees Celsius", the practice of simultaneously using both "°C" and "K" is widespread throughout the scientific world. The use of SI prefixed forms of the degree Celsius (such as "µ°C" or "microdegrees Celsius") to express a temperature interval has not been widely adopted.
In 2005 the CIPM embarked on a program to redefine the kelvin (along with the other SI units) using a more experimentally rigorous methodology. The current definition as of 2016[update] is unsatisfactory for temperatures below 20 K and above . 1300 K In particular, the committee proposed redefining the kelvin such that Boltzmann's constant takes the exact value 6505×10−23 J/K. 1.380 The committee had hoped that the program would be completed in time for its adoption by the CGPM at its 2011 meeting, but at the 2011 meeting the decision was postponed to the 2014 meeting when it would be considered as part of a larger program.
The redefinition was further postponed in 2014, pending more accurate measurements of Boltzmann's constant in terms of the current definition, but it is expected to be adopted at the 26th CGPM in late 2018.
From a scientific point of view, this will link temperature to the rest of SI and result in a stable definition that is independent of any particular substance. From a practical point of view, the redefinition will pass unnoticed; water will still freeze at 273.15 K (0.00 °C; 32.00 °F).
The kelvin is often used in the measure of the colour temperature of light sources. Colour temperature is based upon the principle that a black body radiator emits light whose colour depends on the temperature of the radiator. Black bodies with temperatures below about appear reddish, whereas those above about 4000 K appear bluish. Colour temperature is important in the fields of image projection and 7500 Kphotography, where a colour temperature of approximately is required to match "daylight" film emulsions. In 5600 Kastronomy, the stellar classification of stars and their place on the Hertzsprung–Russell diagram are based, in part, upon their surface temperature, known as effective temperature. The photosphere of the Sun, for instance, has an effective temperature of . 5778 K
Digital cameras and photographic software often use colour temperature in K in edit and setup menus. The simple guide is that the higher the colour temperature, the more white or blue the image will be. The reduction in colour temperature will give an image more dominated by reddish, "warmer" colours.
Kelvin as a measure of noise
In electronics, the kelvin is used as an indicator of how noisy a circuit is in relation to an ultimate noise floor, i.e. the noise temperature. The so-called Johnson–Nyquist noise of discrete resistors and capacitors is a type of thermal noise derived from the Boltzmann constant and can be used to determine the noise temperature of a circuit using the Friis formulas for noise.
The symbol is encoded in Unicode at codepoint U+212A K kelvin sign. However, this is a compatibility character provided for compatibility with legacy encodings. The Unicode standard recommends using U+004B K latin capital letter k instead; that is, a normal capital K. "Three letterlike symbols have been given canonical equivalence to regular letters: U+2126 Ω ohm sign, U+212A K kelvin sign, and U+212B Å angstrom sign. In all three instances, the regular letter should be used."
- Comparison of temperature scales
- International Temperature Scale of 1990
- Negative temperature
- Thermodynamic temperature
- Triple point
Notes and references
- "Resolution 4: Definition of the SI unit of thermodynamic temperature (kelvin)". Resolutions of the 13th CGPM. Bureau International des Poids et Mesures. 1967. Retrieved 2008-02-06.
- Lord Kelvin, William (October 1848). "On an Absolute Thermometric Scale". Philosophical Magazine. Retrieved 2008-02-06.
- "Resolution 3: Definition of the thermodynamic temperature scale". Resolutions of the 10th CGPM. Bureau International des Poids et Mesures. 1954. Retrieved 2008-02-06.
- "Resolution 3: SI unit of thermodynamic temperature (kelvin)". Resolutions of the 13th CGPM. Bureau International des Poids et Mesures. 1967. Retrieved 2008-02-06.
- "Unit of thermodynamic temperature (kelvin)". SI Brochure, 8th edition. Bureau International des Poids et Mesures. 1967. pp. Section 22.214.171.124. Archived from the original on 26 September 2007. Retrieved 2008-02-06.
- "Rules and style conventions for expressing values of quantities". SI Brochure, 8th edition. Bureau International des Poids et Mesures. 1967. pp. Section 126.96.36.199. Retrieved 2012-08-27.
- "SI Unit rules and style conventions". National Institute of Standards and Technology. September 2004. Retrieved 2008-02-06.
- "Rules and style conventions for expressing values of quantities". SI Brochure, 8th edition. Bureau International des Poids et Mesures. 1967. pp. Section 5.3.3. Retrieved 2015-12-13.
- Barry N. Taylor (2008). "Guide for the Use of the International System of Units (SI)" (.PDF). Special Publication 811. National Institute of Standards and Technology. Retrieved 2011-03-05.
- "Units with special names and symbols; units that incorporate special names and symbols". SI Brochure, 8th edition. Bureau International des Poids et Mesures. 2006. pp. Section 2.2.2, Table 3. Retrieved 2016-06-27.
- J. Fischer1; et al. (2007-05-02). "Report to the CIPM on the implications of changing the definition of the base unit kelvin" (PDF). International Committee for Weights and Measures (CIPM). Retrieved 2010-02-23.
- Ian Mills (29 September 2010). "Draft Chapter 2 for SI Brochure, following redefinitions of the base units" (PDF). CCU. Retrieved 2011-01-01.
- "General Conference on Weights and Measures approves possible changes to the International System of Units, including redefinition of the kilogram." (PDF) (Press release). Sèvres, France: General Conference on Weights and Measures. 23 October 2011. Retrieved 25 October 2011.
- Wood, B. (3–4 November 2014). "Report on the Meeting of the CODATA Task Group on Fundamental Constants" (PDF). BIPM. p. 7.
[BIPM director Martin] Milton responded to a question about what would happen if ... the CIPM or the CGPM voted not to move forward with the redefinition of the SI. He responded that he felt that by that time the decision to move forward should be seen as a foregone conclusion.
- "Updating the definition of the kelvin" (PDF). International Bureau for Weights and Measures (BIPM). Retrieved 2010-02-23.
- "22.2". The Unicode Standard, Version 8.0 (PDF). Mountain View, CA, USA: The Unicode Consortium. August 2015. ISBN 978-1-936213-10-8. Retrieved 6 September 2015.
|Look up kelvin in Wiktionary, the free dictionary.|
- Bureau International des Poids et Mesures (2006). "The International System of Units (SI) Brochure" (PDF). 8th Edition. International Committee for Weights and Measures. Retrieved 2008-02-06.
- Kelvin to Celsius converter
- Online Conversion -- Convert different temperature units (Celsius, Fahrenheit, Rankine, Reamur, kelvin)