LMS Kitson 0-4-0ST

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Peter Horn (talk | contribs) at 23:01, 24 June 2015 (Coal → Coal etc). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

LMS Kitson 0-4-0ST
No. 47001 at Barrow Hill (Staveley) Locomotive Depot 23 August 1963.
Type and origin
Power typeSteam
Builder
Serial numberKitson 5644–5648
Build date1932 (5), 1953–54 (5)
Total produced10
Specifications
Configuration:
 • Whyte0-4-0ST
 • UICB n2t
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.3 ft 10 in (1.168 m)
Wheelbase7 ft 6 in (2.29 m)
Length26 ft 4+14 in (8.03 m)
Loco weight33 long tons (34 t; 37 short tons) (7000–7004),
34.8 long tons (35.4 t; 39.0 short tons) (7005–7009)
Fuel typeCoal
Fuel capacity1 long ton (1.02 t; 1.12 short tons) (7000–7004),
2 long tons (2.03 t; 2.24 short tons) (7005–7009)
Water cap.800 imp gal (3,600 L; 960 US gal)
Firebox:
 • Grate area11+34 sq ft (1.09 m2)
BoilerLMS type J3
Boiler pressure160 lbf/in2 (1.10 MPa)
Heating surface:
 • Firebox57 sq ft (5.3 m2)
 • Tubes603 sq ft (56.0 m2)
SuperheaterNone
CylindersTwo, outside
Cylinder size15+12 in × 20 in (394 mm × 508 mm)
Performance figures
Tractive effort14,205 lbf (63.19 kN)
Career
Operators
Power class0F
Withdrawn1963–1966
DispositionAll scrapped

The London Midland and Scottish Railway (LMS) Kitson 0-4-0ST was a class of 0-4-0 saddle tank steam locomotive designed for light shunting.

Five were originally designed and built by Kitson & Co. of Leeds to LMS specification in 1932 and numbered 1500–1504. They were similar to other shunters built for industrial use. The manufacturer's works numbers were 5644–5648.[1] The LMS classified them 0F. These were later renumbered 7000–7004 in 1935/1936. British Railways added 40000 to their numbers after nationalisation in 1948, becoming 47000–47004. In 1955 BR constructed an additional five at Horwich Works, numbered 47005–47009. These differed from the original batch having shorter saddle tanks with extra space given to longer coal bunkers instead.

Some saw use on the Cromford and High Peak Railway in Derbyshire. Withdrawals took place between 1963 and 1966. None were preserved.

In fiction

In The Railway Series books by the Reverend W. Awdry, a character called 'Pug' appears in the 12th book, The Eight Famous Engines. After problems of consistent accuracy of the drawings in the early books, later characters were based more closely on real locomotives. Although not explicitly identified by Awdry, the locomotive in the illustration by John T. Kenney,[2] has been identified as most closely resembling a LMS Kitson 0-4-0ST.[3]

Notes

  1. ^ Rowledge 1975, p. 22.
  2. ^ Awdry 1957, p. 53.
  3. ^ "Jinty and Pug". The Real Lives of Thomas the Tank Engine. Retrieved 12 January 2011.

References

External links