Jump to content

LMS Stanier Class 8F 8151

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 2605:e000:9149:a600:692d:986d:9f5d:538a (talk) at 06:01, 28 August 2018 (sp). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

LMS 8151
48151 at Llandudno Junction with "The Welsh Mountaineer" in August 2014.
Type and origin
Power typeSteam
DesignerWilliam Stanier
BuilderCrewe Works
Serial number154 (second series)
Build dateSeptember 1942
Specifications
Configuration:
 • Whyte2-8-0
 • UIC1′D h2
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.3 ft 3+12 in (1.003 m)
Driver dia.4 ft 8+12 in (1.435 m)
Length63 ft 0+12 in (19.22 m)
Loco weight72.10 long tons (73.26 t; 80.75 short tons)
Fuel typeCoal
Fuel capacity9 long tons (9.1 t; 10.1 short tons)
Water cap.4,000 imp gal (18,000 L; 4,800 US gal)
Firebox:
 • Grate area28+12 sq ft (2.65 m2)
BoilerLMS type 3C
Boiler pressure225 lbf/in2 (1.55 MPa)
CylindersTwo, outside
Cylinder size18+12 in × 28 in (470 mm × 711 mm)
Valve gearWalschaerts
Valve typePiston valves
Performance figures
Tractive effort32,440 lbf (144.30 kN)
Career
Operators
Power classLMS & BR: 7F, later 8F
Numbers
  • LMS: 8151
  • BR: 48151
Axle load classBR: Route Availability 6
WithdrawnJanuary 1968
Current ownerWest Coast Railway Company
DispositionOperational, Mainline Certified

LMS Stanier Class 8F 8151 (British Railways No. 48151) is a preserved British steam locomotive of the LMS Stanier Class 8F.

Overview

8151 was renumbered as 48151 by British railways after the 1948 nationalisation.

After completion at Crewe works in September 1942 she was allocated to Grangemouth shed until 1949 when she was transferred to Canklow (19C) shed where she was based until December 1962. Other sheds she was based at during her career also included Stavely (today the Barrow Hill roundhouse) Jan 1963-Apr 1964, Edge Hill in Liverpool from Apr 1964 to Mar 1966 and finally Northwich until she was withdrawn in January 1968 with a working life of just over 25 years. After being withdrawn she was due to be sent away for scrapping at a nearby scrapyard, however she was sent down to Barry scrapyard in South Wales where she remained for over 8 years.[citation needed]

She was bought for preservation in 1975 and was based at the Embsay and Bolton Abbey Railway for a number of years. She was eventually bought by David Smith and after her heavy restoration was completed she returned to steam in 1987, initially at the Midland Railway - Butterley. Shortly after resteaming, she was certified for mainline use and became a regular runner on the mainline. Since emerging from her most recent overhaul in 2010 she is as of 2016 operational on the mainline and is operated by West Coast Railways.[citation needed]

She even during part of her preserved career carried the nameplates "Gauge O Guild", these were however removed prior to the 2012 season as it was planned to have her look more authentic for the season and haven't been re-applied since.

Fame in Preservation

In Nov 1995, she was loaned for a short time to Tunstead Quary to haul a 975-ton train of hopper wagons, and 5 years later in Dec 2000, she also worked a special one off freight train along the Settle and Carlisle line from Hellifield to Ribblehead Quarry where the hopper wagons were loaded and she then worked the loaded train on from Ribblehead Quarry to Carlisle.[1] Also in 2000, she made her first operational visit to a heritage railway, when she visited the Great Central Railway for a brief period in June of that year, as well as making a brief visit back to Stavely the following month, now the Barrow Hill Roundhouse.

In Oct 2003, 48151 worked her first train over Shap Summit since the end of steam in 1968, the charter was operated by the West Coast Railway Company and ran from Carnforth to Carlisle via Shap both ways.

In Aug 2008, 48151 worked the Liverpool to Manchester leg of The Fifteen Guinea Special which was celebrating 40 years since the ending of steam on BR in August 1968, she was covering for 45110 as her mainline certificate had run out. This was also to be the first time since 1966 that 48151 had visited Liverpool since being allocated to Edge Hill.

In Aug 2010, she became the first member of her class to work over the Conwy Valley Line. The train was the Railway Touring Company's "Welsh Mountaineer" from Preston to Blaenau Ffestiniog running via Chester & Llandudno Junction, the section from Chester to Llandudno Jcn being tender first due to the train reversing direction at the junction alongside the fierce 1 in 47 gradient in the Blaenau direction. The engine has visited the route on a number of occasions in July and August 2011, 2012 and 2014 with other trips being worked by 45231 The Sherwood Forester, 46115 Scots Guardsman or 61994 The Great Marquess.

In Apr 2012, she worked the first steam railtour from Southport since 1991, the train in question was Compass Tours "Roses Express" which ran from Southport to York traveling out via Eccles and returning via Bolton.[2] 48151 was also the first member of her class to visit the resort as no 8F's were allocated to Southport's former 27C shed in steam days.

In May 2014, she made only her second appearance at a heritage railway when she alongside fellow 10A based engine's 45699 Galatea and 46115 Scots Guardsman. The three engines traveled down from Carnforth to Dereham on Thu 29 May in triple headed formation along with a set of coaches as most of the Mid Norfolk Railway's coaches weren't vacuum braked. The three engines then ran at the MNR's West Coast Railways steam gala from Fri 30 May to Sun 1 June and then on Mon 2 June, the three engines returned to Carnforth once more traveling as a triple headed formation.

Also in June, she worked only her second train over Shap Summit for the first time since Oct 2003, the train in question was the Railway Touring Company's "Cumbrian Coast Express" that ran from London Euston to Carlisle on Sat 14 Jun. The 8F took over the train at Carnforth and worked northbound over Shap's 1 in 75 to Carlisle with the return leg being via Whitehaven and Grange-over-Sands on the Cumbrian Coast and Furness Line's.

In July 2018, she worked only her third train over Shap Summit in preservation, the train in question was the Railway Touring Company's "Cumbrian Mountain Express" that ran from London Euston to Carlisle on Sat 21 Jul. On the engines two previous trips up Shap the engine worked it's train alone but due to there being a restricted use of steam engines on Network Rail tracks owing to the hot weather at the time 48151 was assisted by a class 47 diesel no 47237. The return route of this tour was via the Settle and Carlisle Line.[3][4]

Preservation photos

References

  1. ^ https://www.youtube.com/watch?v=G1bBOFnSP6k 48151 working the ballast train to Ribblehead and then to Carlisle
  2. ^ https://www.youtube.com/watch?v=dC7OAuAyqWI 48151 Passing through Meols Cop in the evening
  3. ^ https://www.youtube.com/watch?v=oJk7LXk5UIc 48151 Passing through Beckfoot
  4. ^ http://www.uksteam.info/tours/t18/t0721c.htm UK Steam timings link