New York State Route 360
Map of Monroe and Orleans counties with NY 360 highlighted in red
|Maintained by Monroe County|
|Length||4.87 mi (7.84 km)|
|Existed||c. 1931 – February 2012|
|West end||NY 272 in Hamlin|
|East end||NY 19 in Hamlin|
New York State Route 360 (NY 360) was an east–west state highway located in northwestern Monroe County, New York, in the United States. It extended for 4.87 miles (7.84 km) through the town of Hamlin from an intersection with NY 272 at the Monroe–Orleans county line to a junction with NY 19 north of the hamlet of Hamlin. NY 360 intersected the former southern terminus of NY 215 1.50 miles (2.41 km) east of the county line at its northern junction with Redman Road. Most of NY 360 passed through rural areas; however, the easternmost portion of the route was located in a residential neighborhood that comprises the northernmost portion of the hamlet of Hamlin.
The highways that NY 360 followed were originally improved to state highway standards in the 1900s and 1910s and first designated as part of NY 18 as part of the 1930 renumbering of state highways in New York. By the following year, the NY 360 designation was assigned to what is now NY 18 between NY 272 and NY 19. The alignments of NY 18 and NY 360 between those two routes were flipped c. 1933. Ownership and maintenance of NY 360 was transferred from the state of New York to Monroe County on November 26, 2007, as part of a highway maintenance swap between the two levels of government. NY 360 overlapped with four different county routes at various points along its routing until the route was officially deleted as a touring route in February 2012.
NY 360 began at an intersection with NY 272 at the Monroe–Orleans county line in the town of Hamlin. The route proceeded east on Morton Road, passing through a lightly populated area and crossing a pair of tributaries that feed into Yanty Creek. After 1.50 miles (2.41 km), Morton Road ended at an intersection with Redman Road. This junction was once the southern terminus of NY 215; however, it is now merely a junction between two county-maintained routes. NY 360 turned south here to follow Redman Road for 0.5 miles (0.8 km) before resuming its eastward progression on Church Road.
Like on Morton Road before it, the portion of Church Road that is part of NY 360 was sparsely populated, save for a portion of the road near its junction with Lake Road West Fork. Roughly halfway between Redman Road and Lake Road West Fork, NY 360 passed over Sandy Creek. At Lake Road West Fork, NY 360 veered southeast. As NY 360 continued along the roadway, the amount of development increased as the route approached of the hamlet of Hamlin. North of the hamlet's center, NY 360 met NY 19 (Lake Road East Fork) at a Y-shaped intersection. NY 360 ended here, and NY 19 continued southward into Hamlin as Lake Road.
Origins and designation
On September 20, 1907, the state of New York let a contract for a project to improve Church Road, the section of Redman Road north of Church Road, and the portion of Lake Road West Fork between Church Road and Lake Road to state highway standards. The project was completed by mid-1909, and the highways, collectively inventoried as State Highway 286 (SH 286), were added to the state highway system on July 20, 1909. On June 8, 1915, the state awarded another contract to bring Morton Road up to state highway standards. Work on the road, internally designated as SH 1282, was completed that year, allowing for the highway to be added to the state highway system on December 8, 1915. The first set of posted state routes in New York were assigned in 1924; however, no designations were assigned to either of the aforementioned highways at this time.
In the 1930 renumbering of state highways in New York, several of the routes assigned during the 1920s were renumbered or modified. At the same time, hundreds of state-maintained highways that did not yet have a route number were assigned one. This included both SH 1282 and the section of SH 286 south of Morton Road as both became part of NY 18, a highway that was extended eastward from Buffalo to Rochester as part of the renumbering. At the time, NY 18 entered the hamlet of Morton on Kenmore Road and followed Morton, Redman, and Church Roads and Lake Road West Fork into Hamlin, where it overlapped with NY 63 (modern NY 19) south along Lake Road to rejoin its modern alignment at Hamlin Center Road. By the following year, NY 360 was assigned to what is now NY 18 between NY 272 and Lake Road (then-NY 63) in Hamlin. The alignments of NY 18 and NY 360 between Morton and Hamlin were flipped c. 1933, placing both highways on their modern routings.
Transfer of maintenance
In 2007, ownership and maintenance of NY 360 was transferred from the state of New York to Monroe County as part of a highway maintenance swap between the two levels of government. A bill (S4856, 2007) to enact the swap was introduced in the New York State Senate on April 23 and passed by both the Senate and the New York State Assembly on June 20. The act was signed into law by Governor Eliot Spitzer on August 28. Under the terms of the act, it took effect 90 days after it was signed into law; thus, the maintenance swap officially took place on November 26, 2007.
As a result of the change in maintenance, NY 360 became part of four unsigned county routes. On Morton Road, NY 360 was co-designated as County Route 279 (CR 279). The portion on Redman Road was part of CR 236, which extends from NY 31 west of Brockport to Cook Road near the Lake Ontario State Parkway. The section of NY 360 on Church Road overlapped with CR 277. Finally, the part of NY 360 on Lake Road West Fork was concurrent with CR 234, which extends north past NY 360 to Moscow Road (CR 211). All four overlaps were eliminated when the NY 360 designation was officially removed in February 2012, and the NY 360 shields were removed by June of that year.
|1.50||2.41||Redman Road (CR 236)||Former southern terminus of NY 215|
|4.87||7.84||NY 19||Hamlet of Hamlin|
|1.000 mi = 1.609 km; 1.000 km = 0.621 mi|
- Road Map of New York (Map). Cartography by General Drafting. Standard Oil Company of New York. 1930.
- New York (Map). Cartography by H.M. Gousha Company. Kendall Refining Company. 1931.
- "2006 Traffic Volume Report for New York State" (PDF). New York State Department of Transportation. July 16, 2007. p. 217. Retrieved February 5, 2010.
- D. Woodin (February 9, 2012). "Memorandum: Elimination of Touring Route NY 360 – Town of Hamlin, Monroe County". Office of Traffic Safety and Mobility. Albany, NY: New York State Department of Transportation.
- Microsoft; Nokia (July 14, 2015). "overview map of former NY 360" (Map). Bing Maps. Microsoft. Retrieved July 14, 2015.
- New York (Map) (1969–70 ed.). Cartography by General Drafting. Esso. 1968.
- Monroe County, New York. "Monroe County Map Builder". Retrieved March 23, 2009. The designations were obtained by using the Identify tool.
- New York State Department of Highways (1920). Report of the State Commissioner of Highways. Albany, NY: J. B. Lyon Company. pp. 220, 264. Retrieved February 5, 2010.
- Hamlin Digital Raster Quadrangle (Map). 1:24,000. New York State Department of Transportation. 1997. Retrieved February 5, 2010.
- "New York's Main Highways Designated by Numbers". The New York Times. December 21, 1924. p. XX9.
- Dickinson, Leon A. (January 12, 1930). "New Signs for State Highways". The New York Times. p. 136.
- Texaco Road Map – New York (Map). Cartography by Rand McNally and Company. Texas Oil Company. 1932.
- Texaco Road Map – New York (Map). Cartography by Rand McNally and Company. Texas Oil Company. 1933.
- New York State Legislature. "Bills of New York State – bill number-based search". Retrieved February 5, 2010.
|Wikimedia Commons has media related to New York State Route 360.|
- New York State Route 360 at New York Routes