Processor Direct Slot

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by InternetArchiveBot (talk | contribs) at 16:02, 1 April 2018 (Rescuing 1 sources and tagging 0 as dead. #IABot (v1.6.5)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

LC PDS Ethernet card. PDS connector is at bottom left of photo. The card was mounted parallel to the main logicboard, unlike most computer busses where cards are inserted at right angles to the motherboard.

Processor Direct Slot or PDS introduced by Apple Computer, in several of their Macintosh models, provided a limited measure of hardware expandibility, without going to the expense (in both desktop space and selling price) of providing full-fledged bus expansion slots.

Typically, a machine would feature multiple bus expansions slots, if any. However, there was never more than one PDS slot. Rather than providing a sophisticated communication protocol with arbitration between different bits of hardware that might be trying to use the communication channel at the same time, the PDS slot, for the most part, just gave direct access to signal pins on the CPU, making it closer in nature to a local bus.

Thus, PDS slots tended to be CPU-specific, and therefore a card designed for the PDS slot in the Motorola 68030-based Macintosh SE/30, for example, would not work in the Motorola 68040-based Quadra 700.

The one notable exception to this was the PDS design for the original Motorola 68020-based Macintosh LC. This was Apple's first attempt at a "low-cost" Mac, and it was such a success that, when subsequent models replaced the CPU with a 68030, a 68040, and later a PowerPC processor, ways were found to keep the PDS slot compatible with the original LC, so that the same expansion cards would continue to work.

External links