Runaway Mine Train (Six Flags Over Texas)
 | This article needs additional citations for verification. (November 2007) |
| Runaway Mine Train | |
|---|---|
 The station of the attraction | |
| Six Flags Over Texas | |
| Location | Six Flags Over Texas |
| Park section | Boomtown |
| Coordinates | 32°45′30″N 97°04′07″W / 32.758465°N 97.068487°W |
| Status | Operating |
| Opening date | August 1966 |
| Cost | 1,000,000 |
| General statistics | |
| Type | Steel |
| Manufacturer | Arrow Dynamics |
| Model | Mine Train |
| Lift/launch system | Chain |
| Height | 35 ft (11 m) |
| Length | 2,400 ft (730 m) |
| Speed | 35 mph (56 km/h) |
| Inversions | 0 |
| Duration | 3:00 |
| Capacity | 2000 riders per hour |
| Height restriction | 42 in (107 cm) |
| Runaway Mine Train at RCDB | |
Runaway Mine Train (originally called Run-A-Way Mine Train) is a steel roller coaster located in the Boomtown section of Six Flags Over Texas in Arlington, Texas. Built in 1966, Runaway Mine Train is the oldest roller coaster in the park.
The ride was the first of many mine train roller coasters built across the United States in response to the development of tubular steel rails. The Arrow Development Company, with Ronald Toomer, Karl Bacon, and Ed Morgan, advanced the steel roller coaster and roller coaster technology into a new era.[1]
In September 2006, Runaway Mine Train was designated an ACE Coaster Landmark by the American Coaster Enthusiasts.[1]
Ride
The ride features three lift hills. The ride begins with the trip up the first and highest lift. From there it travels around the track to the second lift. The second lift is housed in a building designed to look like a rock crusher. The final lift leads into the "Ace Hotel and Saloon". The "Ace Hotel" was named in 1974 for John 'Ace' Cocharo, a mine train foreman turned ride supervisor. After the lift, the ride drops riders into a tunnel through Caddo Lake, emerging just outside the final brake run and queue house.[2]
Runaway is prone to flooding from Johnson Creek after heavy rainfall amounts.[3]
Design
Runaway Mine Train utilizes tubular steel rails similar to those used on the earlier Matterhorn Bobsleds at Disneyland. This particular coaster has three lift hills and two tunnels. The ride's climax is the final drop after the third lift hill, where the track dives into a 150-foot-long (46 m) curving tunnel below the park's Caddo Lake. This feature is notable as the world's first underwater coaster tunnel. The old-style Arrow Development cars were designed with restraints (lap bars) that can be released only manually.