Talk:Hoist controller

This article is within the scope of WikiProject Technology, a collaborative effort to improve the coverage of technology on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.TechnologyWikipedia:WikiProject TechnologyTemplate:WikiProject TechnologyTechnology articles

Mining Low‑importance

	This article is within the scope of WikiProject Mining, a collaborative project to organize and improve articles related to mining and mineral industries. If you would like to participate, you can edit the attached article, or visit the project page, where you can see a list of open tasks, join in the discussion, or join the project.MiningWikipedia:WikiProject MiningTemplate:WikiProject MiningMining articles
Low	This article has been rated as Low-importance on the project's importance scale.

This page seems entirely wrong

It would seem to me that a hoist controller is the control device for a hoist, and that most of the content here belongs in the mine hoist subsection of the hoist (device) page.

The material here on bell codes may warrant a second page, but until it is fully developed, it probably only warrants a pragraph in the section on mine hoists.

I have seen bell-code tables from several mining districts, and a collection of them would be interesting, instead of just one South African example.

128.255.45.57 (talk) 18:31, 8 September 2008 (UTC)[reply]

Text left over from an older version of this page

In the mining sector in South Africa, the action of raising and lowering persons or material is facilitated, by means of an onsetter(person)underground (on a certain landing level) and a Banksman(person), working on the shaft-bank area. These persons communicate with the Winding Engine Driver(WED) by signalling on a locked bell system. These signals are interpreted by the WED as to what action is needed by the Onsetter and Banksman with regard to the movement of the conveyance(s). For example: The banksman will signal 1(one) to the WED and then the WED will control the machine in such a way that the conveyance will be raised at the shaft bank. The tone of the signal will differ from that of the onsetter, so that the driver will know from whom the signal is coming. There are many different signals rung in sequence. Each signal will have a different meaning to the WED. There are signals for raising, lowering, raising slowly, lowering slowly. A signal which informs the WED that the conveyance is clear and that the WED may proceed to perform whatever action He/She wants to perform at His/Her discretion. There are also signals informing the WED of what contents the conveyance is transporting, persons, material, explosives, long material attached to the bottom of the conveyance etc. These signals are standardised on all mines in South Africa, and have been approved by the government mining engineer (a person appointed by the minister of minerals and energy affairs). These signals are known as the Government Code of Signals. Special signals for a specific mine have to be approved by the regional director (an inspector of machinery appointed by the minister of minerals and energy affairs) and can only be used once approved. No other signals than these signals are allowed.

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Hoist controller. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

Added archive https://web.archive.org/web/20110717001422/http://files.asme.org/ASMEORG/Communities/History/Landmarks/5631.pdf to http://files.asme.org/ASMEORG/Communities/History/Landmarks/5631.pdf

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 19:32, 5 November 2017 (UTC)[reply]

Pendant controller

The handheld controllers which are usually suspended from the hoisting device are widely known as pendant controllers Everybody got to be somewhere! (talk) 23:25, 14 October 2019 (UTC)[reply]