Jump to content

Talk:Zinc chloride

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia
(Redirected from Talk:Zinc chloride/Comments)
Former good articleZinc chloride was one of the good articles, but it has been removed from the list. There are suggestions below for improving the article to meet the good article criteria. Once these issues have been addressed, the article can be renominated. Editors may also seek a reassessment of the decision if they believe there was a mistake.
Article milestones
DateProcessResult
December 10, 2005Good article nomineeListed
March 20, 2007Good article reassessmentDelisted
Current status: Delisted good article

Solubility

[edit]

Is zinc chloride really THIS soluble? Adding 432 grams of dry powder in 100 grams of water, and still say that it dissolves? Wim van Dorst July 8, 2005 19:43 (UTC).

Yes, true, according to the Merck Index and the CRC Handbook. If I get a chance I will check this, but I seem to recall reading something like, "Zinc chloride has the remarkable ability to dissolve in only ...." The solubility in boiling water is even more remarkable, 614g per 100g H2O! And ZnBr2 has similar solubility. Walkerma 19:50, 11 July 2005 (UTC)[reply]

Solubility

[edit]

I have tried to dissolve 100g in 1 L of H20 at 25 deg C. It doesn't work. I ought to have a pH 5 solution according to the MSDS, but I have a pH 5.5 solution and I estimate just under half the ZnCl2 remaining undissolved. Sigma-Aldrich have suggested lowering the pH of my solution, but I'm convinced the pH of the water wasn't a factor. I'm hoping Chemistry is wrong, and I'm right; so if anyone else would like to check this for themselves...

I went and tested this for myself, I took of zinc chloride from the stockroom, and at 29 °C (it's hot here today!) I got just over 20 g of it to go into 5.0 mL. Our stuff is not dry, as you can see from the picture, but it did give out a significant amount of heat as it dissolved so it's not totally hydrated away either.
I wonder if your problem is related to the fact that ZnCl2 can hydrolyse. This problem is more often seen with tin(II) chloride and bismuth(III) salts, you can see the description of this problem with SnCl2 here. In other words, you may have some zinc oxide or zinc oxychloride present as an insoluble material. You can (a) filter it off (I bet it's a lot less than half, too!) and use the part that's left or (b) add HCl to get it all to dissolve at (hopefully) pH 5, or (c) buy a fresh bottle. Let us know what you find, please! Walkerma 20:40, 13 September 2005 (UTC)[reply]
I have added HCl and I have dissolved all the Zinc Chloride. The pH is approximately 5, I think a little insoluble material is still present but that won't matter for what I need it for. Thanks for your help. Karl. 15/09/05.


As an aside, does anybody know why we can't make a 10% solution of zinc chloride using de-ionised water, but we can make a 50% solution using distilled water? Thanks, Karl. 21/09/05.

Have you checked the quality of the deionised water lately? That may indeed be the problem. After all, zinc carbonate is insoluble! For my tests I used distilled water. Cheers, Walkerma 15:49, 21 September 2005 (UTC)[reply]
I haven't checked our deionised water, but I also had to make up a calcium chloride solution. I used distilled but just out of interest I made up a small amount with deionised and the solution formed a precipitate, which I'm guessing is calcium carbonate. Karl 22/09/05.
Deonisation normally happens by exchanging cations against H+ and anions against OH-. Either cation exchange is not working anymore and you therefore get a fairly basic solution from your ion exchange columns (check pH). Or both columns are not working, there is a fairly high carbonate content and the tap water passes unchanged. Iridos 22:38, 26 April 2007 (UTC)[reply]

What about the formation of zinc oxychloride (ZnCl2.5Zn0.6H2O)? .[1]131.180.39.0 (talk) 07:48, 6 May 2014 (UTC)[reply]

It's a common procedure to make ZnCl by adding HCl to an excess of Zinc carbonate, however the carbonate becomes soluble in acidic solutions. Could the problem be un-reacted Zn carbonate in solution and possibly the common ion effect? — Preceding unsigned comment added by QParallax (talkcontribs) 18:02, 15 May 2015 (UTC)[reply]

References

Wait. Surely you are measuring the solubility in HCl, not water? Polymath uk (talk) 08:14, 5 February 2023 (UTC)[reply]

Errors

[edit]

This makes no sense (a mix of topics) and has no citations: "Typically this flux was prepared by dissolving zinc foil in dilute hydrochloric acid until the liquid ceased to evolve hydrogen, for this reason such flux was known as killed spirits. because of its corrosive nature it is not a suitable flux for situations where any residue cannot be cleaned totally away, such as electronic work. This property also leads to its use in the manufacture of magnesia cements for dental fillings and certain mouthwashes as an active ingredient. "

Yes, this was probably added by someone passing through who was familiar with the use. It seems plausible. Do you know anything about this topic, enough to rewrite it with a citation? Or should we just delete it? When I originally wrote the article, my source only stated that it was used as a flux - no details. Walkerma 20:59, 6 November 2006 (UTC)[reply]
This property also leads to its use in the manufacture of magnesia cements for dental fillings and certain mouthwashes as an active ingredient. does not sound plausible - which property exactly leads to its use in mouthwashes?! I suggest to delete it (well, keep it here on the discussion page) until someone comes with a source and it can be rewritten properly. Iridos 22:42, 26 April 2007 (UTC)[reply]

Delisted GA

[edit]

This article has been removed from the GA list due to a lack of in line citations. Tarret 18:14, 14 March 2007 (UTC)[reply]

Failed "good article" nomination

[edit]

This article failed good article nomination. This is how the article, as of March 20, 2007, compares against the six good article criteria:

1. Well written?: The grammar and format is good. Unfortunately, it contains too many unexplained technical terms and jargon; a reader would not want to click on every single link to find out what the mentioned word means.
2. Factually accurate?: Inline citations are an issue. Although they are not absolutely required, they are helpful especially in areas with possibly dubious information.
3. Broad in coverage?: "Precautions" is just two short sentences and needs expansion.
4. Neutral point of view?: Follows NPOV.
5. Article stability? Stable.
6. Images?: Good.

When these issues are addressed, the article can be resubmitted for consideration. If you feel that this review is in error, feel free to take it to a GA review. Thank you for your work so far.

King of 19:49, 20 March 2007 (UTC)[reply]

GA review (see here for criteria)
  1. It is reasonably well written.
    a (prose): b (MoS):
  2. It is factually accurate and verifiable.
    a (references): b (citations to reliable sources): c (OR):
  3. It is broad in its coverage.
    a (major aspects): b (focused):
  4. It follows the neutral point of view policy.
    a (fair representation): b (all significant views):
  5. It is stable.
  6. It contains images, where possible, to illustrate the topic.
    a (tagged and captioned): b lack of images (does not in itself exclude GA): c (non-free images have fair use rationales):
  7. Overall:
    a Pass/Fail:

King of 19:49, 20 March 2007 (UTC)[reply]

Unfortunately, it contains too many unexplained technical terms and jargon;
That seems a little unfair - it is a chemical article. You can't go around and explain what covalent means in every article mentioning covalent bonds. Same goes for Lewis acid, etc. etc.- the only (!!) term I see that could be easily explained would be hygroscopic (attracts water). Everything else would just be to complex//too far away from the topic to explain in here. Perhaps what you complained about has already been fixed (?) - if not, please explain which jargon you see that could be easily explained (or expressed differently without garbling its meaning). Iridos 04:39, 26 April 2007 (UTC)[reply]
All too often we get that complaint, though in this article I tried to keep the style readable & accessible. I agree, it's hard to write a thorough chem article without "jargon". I also believe in writing in levels - beginner, medium, expert - and some of the expert may have put off this reviewer. User:KOH is a very experienced reviewer, though, and I'm sure we could make this article much better (as you're doing, Iridos!). Walkerma 05:10, 26 April 2007 (UTC)[reply]
I think you didn't do a bad job with this - only the 1st, perhaps the 1st two paragraphs are on non-chemist level, I think. Hardly any non-chemist will be interested in the details about in which synthesis zinc chloride is mainly used... so the complaint about jargon can only mean the first paragraphs. And there I don't see much room for improvement. Let's go through this:
or its crystalline forms containing crystal water (hydrates)?
  • hygroscopic
  • deliquescent
skip hygroscopic, explain deliquescent (attracts enough water from air moisture to form a solution when exposed to air)
alternatively: (forms solutions with water attracted from air moisture)
or explain hygroscopic (attracts water) and link deliquescent as already done
  • hexagonal close-packed
don't see how that can be explained further in a few words
  • metallurgical fluxes
ditto.
Apropos: Shouldnt it be: is used as metallurgical flux?
  • ionic
ditto
  • covalent
ditto. Cant explain the concept of covalent bonds here.
  • melting point
should be understood by non-chemists?
  • solubility
should be understood by non-chemists?
  • diethyl ether
should be understood by non-chemists?
Could include the formula - but would that help to understand the article?
  • lewis acid
too complex to explain here, I think. Any explanation will only add confusion. Keep the link.
  • pH
I expanded that to "[..ZnCl2 solutions...] are acidic with a pH around 4."
  • hydrolized
hm... (reacted with water)
  • oxychloride
Well, dunno - could show the formula.
  • anhydrous/hydrated (again)
  • hydrolysis
  • dioxane
Could show formula, but would that help understanding the article?
  • precipitate

hm "percipitates or crystallizes" (crystallization being the more common term??)

  • sublimation
Just put your comments inside the list (with two '::')... I think it's important not to overdo it, though - else the article stops being readable and nothing is gained.
as for the other issues:
Citations I don't think there 'dubious information' in here (??) so the citaions are no issue?
Anyways, they might become one. Could check here: [1]
Precautions being to short: I expanded it (now it's actually too long and does not only contain precautions, but also health effects).
Iridos 22:28, 26 April 2007 (UTC)[reply]

Toxicity

[edit]

I was missing this data on toxicity in the article. The LD-50 value gives you a rough estimate of the amounts when a substance will be toxic (like, if you're factor 100 or 1000 away from it it should be non-toxic for a single exposure). Not sure, if all of those should be entered, or only some of them, so I put them here for discussion first. They should probably go in the table in some way. LD50:

  • ORL-RAT LD50 350 mg/kg
  • IPR-RAT LD50 58 mg/kg
  • ORL-MUS LD50 350 mg/kg
  • IPR-MUS LD50 24 mg/kg
  • SCU-MUS LD50 330 mg/kg
  • ORL-GPG LD50 200 mg/kg

Source: http://www.camd.lsu.edu/msds/z/zinc_chloride.htm Iridos 04:15, 26 April 2007 (UTC)[reply]

  • Please limit the biomedical MSDSy info. One can flood all chemistry article with tons of safety-tox data that is not highly relevant to the technical gist of this project. In special cases, WE-Chem has created articles on specific toxicities, e.g. Arsenic poisoning. Cyanide has an extensive and regularly edited section on its toxicity. These more acute poisons indeed merit attention. Also another problem is that including extensive safety info encourages contributions from individuals that have zero knowledge of chemistry. It is awkward reversing such well intentioned cruft. Many new contributors, kids and students probably, love to paste in safety info. ZnCl2 is not particularly interesting from a toxicology perspective, especially relative to more pressing compounds in the WE-chem project that really need this kind of attention. IMHO. --Smokefoot 22:53, 26 April 2007 (UTC)[reply]

It is not? It's a trace mineral, present in many enzymes (e.g. for zinc fingers), absolutely essential for the body and yet, you can be poisoned by it... But anyways, I cant see "flooding" by having a pretty long table. Space for text is not an issue in Wikipedia. Readability and a clear structure are, of course, and that was my concern (else I would have just edited the article). Why is it a problem, when people with small chemical knowledge enter safety data? If it makes them read the article and some related articles, they will probably learn a lot and I'm all for it :) Hm, apropos zero-knowledge - ORL-RAT is pretty clear. SCU is probably subcutane (?) MUS is a weird abbreviation for mouse (?!?) and -duh- IPR means intraperitoneal and I got no clue what GPG should be. Well, that makes the decision which of those to skip quite a lot easier *g*. Apropos cyanide - the cyanide anion doesnt have a very exciting space-fill model, so I would regard that one as cruft :) 199.74.98.127 03:50, 27 April 2007 (UTC)[reply]

ZnCl2 does not have particularly interesting toxicology. Zn2+ of course does being so pervasive in enzymology and in natural waters etc. But most of the effects that you will allude to arise from Zn2+, fairly independent of the counter anion. So by all means write an article about the biomedical chem of Zn2+! Great project for you and WE-chem. But it might save your time and that of readers if the information were consolidated, otherwise one would need to include very similar information into dozens of articles describing Zn2+ salts (thousands are known). And each one of these individualised safety blurbs (on the sulfate, bromide, chloride, iodide, carbonate, mixed anion...) would be subjected to independent editing by well meaning individuals who rarely understand even introductory coordination chemistry or the difference between various hydrates and gegenions and the difference between solid state structures and solution structures. But maybe you have some deeper insights and we look forward to reading them. There are four crystalline modifications of anhydrous ZnCl2 and several hydrates. Each has its own MSDS - so how do you decide which one gets the priority??? Ditto for many of the zinc salts. --Smokefoot 12:58, 27 April 2007 (UTC)[reply]

Well, this is generally true for ionic substances - only a lack of solubility in water or decompositon in water can change this fact for any salt. Still, ZnCl2 is one major Zn2+ compound... Anyways - 'Four crystalline forms, so-called polymorphs, of ZnCl2 are known,' Is different from 'Four crystalline hydrates of zinc chloride are known' You didnt provide a source there... where's that from?199.74.98.127 15:45, 27 April 2007 (UTC)[reply]

dissociation

[edit]

The fact that zinc chloride dissolves very well does not imply that it always dissociates. It is not a salt like but a rather covalent material. On concentrated solutions (or molten hydrates if you prefer) FTIR and EXAFS studies show various Zn-Clx-H2O complexes in existence. [1] Jcwf (talk) 17:18, 7 November 2008 (UTC)[reply]

  1. ^ Yamaguchi et al J Phys Chem 1989, 93, 2620-25. D'Angelo et al JACS 2002 124(9) 1985-67
Thanks, that's very useful! Certainly the conc aq solutions exhibit interesting behaviour. Cheers, Walkerma (talk) 20:23, 7 November 2008 (UTC)[reply]

Edits- 12/1/2009

[edit]

I have reorganized the article by adding a new section for reactions. This is IMO still only a B class article as there is much still missing- e.g. ZnCl2 chemistry in dry batteries, complexes to name a few areas. It still needs more rationalisation - theres a lot of good stuff here but it doesn't flow--Axiosaurus (talk) 12:43, 12 January 2009 (UTC)[reply]

Textile Section: Zinc chloride and febreeze

[edit]

Does Febreeze actually contain zinc chloride? How does it help "eliminating odour" as febreeze supposedly does?

And how does it have anything to do with "affinity to fabric" or "zinc chloride ability to dissolve natural fibre"? —Preceding unsigned comment added by 173.32.73.90 (talk) 06:20, 9 June 2009 (UTC)[reply]

Use in batteries

[edit]

According to the article on Zinc-Carbon Batteries, this is used in them. Yet, this article makes no mention of that in its "Applications" section. I'd fix it myself, but you're supposed to cite outside references, and I'm too lazy to find one myself. 63.3.9.1 (talk) 23:45, 17 February 2010 (UTC)[reply]

Cancer treatment

[edit]

This section misleads zinc chloride as a viable cancer treatment. Both citations[1][2] in the article are dubious about zinc chloride as an effective cancer treatment. This section should either be deleted or expanded upon zinc chloride as a questionable alternative medicine cancer treatment. — Preceding unsigned comment added by 76.219.105.65 (talk) 06:08, 9 November 2014 (UTC)[reply]

Assessment comment

[edit]

The comment(s) below were originally left at Talk:Zinc chloride/Comments, and are posted here for posterity. Following several discussions in past years, these subpages are now deprecated. The comments may be irrelevant or outdated; if so, please feel free to remove this section.

Comment(s)Press [show] to view →
The following suggestions were generated by a semi-automatic javascript program, and might not be applicable for the article in question.
  • The lead of this article may be too long, or may contain too many paragraphs. Please follow guidelines at WP:LEAD; be aware that the lead should adequately summarize the article.[?]
  • Consider removing links that add little to the article or that have been repeated in close proximity to other links to the same article, as per Wikipedia:Manual of Style (links) and WP:CONTEXT.[?]
  • Per Wikipedia:What is a featured article?, Images should have concise captions.[?]
  • Per Wikipedia:Manual of Style (numbers), there should be a non-breaking space -   between a number and the unit of measurement. For example, instead of 100 mL, use 100 mL, which when you are editing the page, should look like: 100 mL.[?]
  • Per Wikipedia:Manual of Style (numbers), please spell out source units of measurements in text; for example, the Moon is 380,000 kilometres (240,000 mi) from Earth.[?] Specifically, an example is 100 mL.
  • Please make the spelling of English words consistent with either American or British spelling, depending upon the subject of the article. Examples include: behaviour (B) (American: behavior), catalyse (B) (American: catalyze), hydrolyze (A) (British: hydrolyse), molt (A) (British: moult).
  • Please ensure that the article has gone through a thorough copyediting so that it exemplifies some of Wikipedia's best work. See also User:Tony1/How to satisfy Criterion 1a.[?]
You may wish to browse through User:AndyZ/Suggestions for further ideas. Thanks, Wim van Dorst (Talk) 09:05, 21 March 2007 (UTC)[reply]

Last edited at 09:05, 21 March 2007 (UTC). Substituted at 11:17, 30 April 2016 (UTC)

GA Review

[edit]
This review is transcluded from Talk:Zinc chloride/GA1. The edit link for this section can be used to add comments to the review.

Nominator: Keresluna (talk · contribs) 18:32, 9 May 2024 (UTC)[reply]

Reviewer: Esculenta (talk · contribs) 17:10, 15 June 2024 (UTC)[reply]


I'll review this. Comments in a day or two. Esculenta (talk) 17:10, 15 June 2024 (UTC)[reply]

Unfortunately, this article is still quite a ways from meeting the GA criteria, and the "citation needed" and "additional citation(s) needed" tags (which really should have been dealt with before this nomination) mean this article should be quickfailed. In additional to the two current cleanup tags, I've added a few more tags where citations are needed. I'm also appending some additional comments suggesting other areas for article improvement. Esculenta (talk) 17:52, 15 June 2024 (UTC)[reply]

  • The lead is too short to adequately summarize the article's contents; see WP:Lead for guidance.
  • Organization and Flow: The article could benefit from better organization. Some sections, like the detailed descriptions of zinc chloride's forms and hydrates, could be streamlined to improve readability.
  • Redundancy: There are instances of redundancy, particularly in the sections describing the structure and reactions of zinc chloride.
  • Additional Context: While the article provides extensive chemical details, adding more context about the industrial and practical applications of zinc chloride could make it more engaging. For instance, discussing specific industries that rely heavily on zinc chloride and providing real-world examples of its use could enhance the article's relevance. Some uses are already briefly mentioned, here's some additional ideas:
  • Textile Industry: Detail specific processes in the textile industry that benefit from zinc chloride. For example,
Rayon Production: Concentrated solutions of zinc chloride are used to dissolve cellulose in the production of rayon, a regenerated cellulose fiber. This process involves forming a viscous solution of cellulose in zinc chloride, which is then extruded to produce rayon fibers.
Dyeing Processes: As a mordant, zinc chloride helps fix dyes onto fabrics, ensuring more vibrant and long-lasting colors. It prepares the fabric for dyeing by enhancing the bonding of dyes to the textile fibers.
Silk Processing: In the degumming process of silk, zinc chloride is used to remove sericin, the protein that coats silk fibers. This results in softer and more lustrous silk, improving its texture and appearance.
  • Paper Industry: In the paper industry, zinc chloride is used in the manufacture of parchment paper. The compound reacts with cellulose in the paper to form a gelatinous film, giving parchment paper its characteristic strength and translucency.
  • Chemical Synthesis:
Industrial Scale Reactions: Provide more real-world examples of industrial-scale reactions that use zinc chloride, such as the production of acetylsalicylic acid (aspirin) where it acts as a catalyst.
  • Water Treatment: Expand on how zinc chloride is used in water treatment, specifically in removing impurities and heavy metals. Explain the mechanisms by which it acts as a coagulant or flocculant.
  • Pharmaceutical Industry: Mention specific drugs or types of pharmaceuticals that are synthesized using zinc chloride as a reagent or catalyst, providing insight into its role in medicinal chemistry.
  • Fireproofing and Wood Preservation: Elaborate on both historical and modern uses of zinc chloride in fireproofing and wood preservation. Discuss its effectiveness compared to other methods and any environmental considerations.
  • What about its environmental impact? Is there any published info about the environmental impact of zinc chloride use and disposal? Highlight any regulations or best practices for minimizing its environmental footprint. Discuss the measures taken to mitigate any negative environmental impacts, such as waste treatment processes or alternative, more eco-friendly applications.
  • History. The history of zinc chloride is a glaring omission in the current Wikipedia article. Some suggestions:
Ancient and Medieval Periods:
Early Uses: The use of zinc compounds can be traced back to ancient civilizations, but specific references to zinc chloride are scarce. However, its antiseptic and preservative properties were likely recognized even if the compound wasn't precisely identified.
Alchemical Studies: During the medieval period, alchemists might have encountered zinc chloride while experimenting with zinc and hydrochloric acid, although they did not understand the chemical composition by modern standards.
18th and 19th Centuries:
Scientific Identification: In the 18th century, advancements in chemistry led to a better understanding of chemical compounds. Zinc chloride was identified as a distinct compound, and its properties began to be studied systematically.
Industrial Applications: By the 19th century, zinc chloride found significant industrial applications. For instance, Sir William Burnett, a British physician, promoted its use as a disinfectant and wood preservative in the 1830s and 1840s. His "Burnett's Disinfecting Fluid" was widely used for its effectiveness in controlling infections and preserving materials. (see e.g., here). This is discussed in "Other uses", but might be more effectively integrated into a history section.
Fireproofing and Textile Industry: In the mid-1800s, zinc chloride solutions were used for fireproofing fabrics and processing textiles. This period marked the compound’s entry into industrial manufacturing and public health.
20th Century to Present:
Expansion of Uses: The 20th century saw an expansion of zinc chloride applications, including its use in organic synthesis, metallurgy, and as a catalyst in chemical reactions. Its role in preparing other zinc compounds and its utility in laboratory reagents became well-established.
Modern Developments: In recent decades, research into the compound's applications in nanotechnology, materials science, and environmental science has continued to grow. Zinc chloride remains a valuable chemical in both industrial processes and academic research.

Other comments:

  • in the Chembox, why are the CAS #'s for Tetrahydrate and Mixed hydrate marked with a red "x"?
  • The Standard InChI and InChIKey provided in the Chembox appear to be duplicated

Response: The FA review is well done and points out some real gaps, especially related to applications and format. The review highlights some conflict between FA and usefulness. Chemists are mindful that much old literature exists for many compounds. We just dont care. Most of that work is flawed and useless. On top of that, retrieving that old literature and representing it well is time consuming. --Smokefoot (talk) 13:31, 16 June 2024 (UTC)[reply]