User talk:Duchifat

Your submission at Articles for creation

Thank you for your recent submission to Articles for Creation. Your article submission has been reviewed. Unfortunately, it has not been accepted at this time. Please view your submission to see the comments left by the reviewer. You are welcome to edit the submission to address the issues raised, and resubmit if you feel they have been resolved.

If you would like to continue working on the submission, you can find it at Wikipedia talk:Articles for creation/Icephobicity.
To edit the submission, click on the "Edit" tab at the top of the window.
If you need any assistance, you can ask for help at the Articles for creation help desk, or on the reviewer's talk page. Please remember to link to the submission!
You can also get live chat help from experienced editors.

Thank you for your contributions to Wikipedia! ☯ Bonkers The Clown \(^_^)/ Nonsensical Babble ☯ 22:49, 4 July 2013 (UTC)[reply]

July 2013

Hello, I'm BracketBot. I have automatically detected that your edit to Tribology may have broken the syntax by modifying 1 "()"s. If you have, don't worry, just edit the page again to fix it. If I misunderstood what happened, or if you have any questions, you can leave a message on my operator's talk page.

List of unpaired brackets remaining on the page:

]. These interdisciplinary areas study the friction, wear and lubrication at the nanoscale (including the [[Atomic force microscopy]] and micro/nanoelectromechanical systems ([[MEMS]]/[[NEMS]]

Thanks, BracketBot (talk) 03:55, 24 July 2013 (UTC)[reply]

Hello, I'm BracketBot. I have automatically detected that your edit to Friction may have broken the syntax by modifying 1 "()"s. If you have, don't worry, just edit the page again to fix it. If I misunderstood what happened, or if you have any questions, you can leave a message on my operator's talk page.

Thanks, BracketBot (talk) 04:05, 24 July 2013 (UTC)[reply]

Your submission at Articles for creation

Thank you for your recent submission to Articles for Creation. Your article submission has been reviewed. Unfortunately, it has not been accepted at this time. Please view your submission to see the comments left by the reviewer. You are welcome to edit the submission to address the issues raised, and resubmit if you feel they have been resolved.

If you would like to continue working on the submission, you can find it at Wikipedia talk:Articles for creation/Icephobicity.
To edit the submission, click on the "Edit" tab at the top of the window.
If you need any assistance, you can ask for help at the Articles for creation help desk, or on the reviewer's talk page. Please remember to link to the submission!
You can also get live chat help from experienced editors.

Thank you for your contributions to Wikipedia! APerson (talk!) 21:43, 25 July 2013 (UTC)[reply]

Talkback

Hello, Duchifat. You have new messages at APerson's talk page.
Message added 22:34, 26 July 2013 (UTC). You can remove this notice at any time by removing the {{Talkback}} or {{Tb}} template.[reply]

APerson (talk!) 22:34, 26 July 2013 (UTC)[reply]

Your submission at Articles for creation

Thank you for your recent submission to Articles for Creation. Your article submission has been reviewed. Unfortunately, it has not been accepted at this time. Please view your submission to see the comments left by the reviewer. You are welcome to edit the submission to address the issues raised, and resubmit if you feel they have been resolved.

If you would like to continue working on the submission, you can find it at Wikipedia talk:Articles for creation/Icephobicity.
To edit the submission, click on the "Edit" tab at the top of the window.
If you need any assistance, you can ask for help at the Articles for creation help desk, or on the reviewer's talk page. Please remember to link to the submission!
You can also get live chat help from experienced editors.

Thank you for your contributions to Wikipedia! RadioFan (talk) 14:24, 27 July 2013 (UTC)[reply]

Your submission at Articles for creation

Icephobicity, which you submitted to Articles for creation, has been created.
The article has been assessed as Start-Class, which is recorded on the article's talk page. You may like to take a look at the grading scheme to see how you can improve the article.

You are more than welcome to continue making quality contributions to Wikipedia. Note that because you are a logged-in user, you can create articles yourself, and don't have to post a request. However, you may continue submitting work to Articles for Creation if you prefer.

If you have any questions, you are welcome to ask at the help desk.
If you would like to help us improve this process, please consider leaving us some feedback.

Thank you for helping improve Wikipedia!

DGG ( talk ) 22:13, 27 July 2013 (UTC)[reply]

Hello Duchifat, and welcome to Wikipedia. Your addition to ASME Burt L. Newkirk Award has had to be removed, as it appears to have added copyrighted material without permission from the copyright holder. While we appreciate your contributing to Wikipedia, there are certain things you must keep in mind about using information from your sources to avoid copyright or plagiarism issues here.

You can only copy/translate a small amount of a source, and you must mark what you take as a direct quotation with double quotation marks (") and a cited source. You can read about this at Wikipedia:Non-free content in the sections on "text". See also Wikipedia:Referencing for beginners, for how to cite sources here.
Aside from limited quotation, you must put all information in your own words and structure, in proper paraphrase. Following the source's words too closely can create copyright problems, so it is not permitted here; see Wikipedia:Close paraphrasing. (There is a college-level introduction to paraphrase, with examples, hosted by the Online Writing Lab of Purdue.) Even when using your own words, you are still, however, asked to cite your sources to verify information and to demonstrate that the content is not original research.
Our primary policy on using copyrighted content is Wikipedia:Copyrights. You may also want to review Wikipedia:Copy-paste.
In very rare cases (that is, for sources that are public domain or compatibly licensed), it may be possible to include greater portions of a source text. However, please seek help at the help desk before adding such content to the article. 99.9% of sources may not be added in this way, so it is necessary to seek confirmation first. If you do confirm that a source is public domain or compatibly licensed, you will still need to provide full attribution; see Wikipedia:Plagiarism for the steps you need to follow.
Also note that Wikipedia articles may not be copied without attribution. If you want to copy from another Wikipedia project or article, you can, but please follow the steps in Wikipedia:Copying within Wikipedia.

It's very important that contributors understand and follow these practices, as policy requires that people who persistently do not must be blocked from editing. If you have any questions about this, you are welcome to leave me a message on my talk page. Thank you. AdventurousSquirrel (talk) 00:50, 28 July 2013 (UTC)[reply]

June 2014

Hello, I'm BracketBot. I have automatically detected that your edit to Friction may have broken the syntax by modifying 1 "()"s. If you have, don't worry: just edit the page again to fix it. If I misunderstood what happened, or if you have any questions, you can leave a message on my operator's talk page.

It's OK to remove this message. Also, to stop receiving these messages, follow these opt-out instructions. Thanks, BracketBot (talk) 02:49, 11 June 2014 (UTC)[reply]

George G. Adams

This is an automated message from CorenSearchBot. I have performed a web search with the contents of George G. Adams, and it appears to include material copied directly from http://www1.coe.neu.edu/~adams_g/.

It is possible that the bot is confused and found similarity where none actually exists. If that is the case, you can remove the tag from the article. The article will be reviewed to determine if there are any copyright issues.

If substantial content is duplicated and it is not public domain or available under a compatible license, it will be deleted. For legal reasons, we cannot accept copyrighted text or images borrowed from other web sites or printed material. You may use such publications as a source of information, but not as a source of sentences. See our copyright policy for further details. (If you own the copyright to the previously published content and wish to donate it, see Wikipedia:Donating copyrighted materials for the procedure.) CorenSearchBot (talk) 04:32, 11 June 2014 (UTC)[reply]

Disambiguation link notification for September 30

Hi. Thank you for your recent edits. Wikipedia appreciates your help. We noticed though that when you edited Josiah Pardo, you added a link pointing to the disambiguation page David Pardo. Such links are almost always unintended, since a disambiguation page is merely a list of "Did you mean..." article titles. Read the FAQ • Join us at the DPL WikiProject.

It's OK to remove this message. Also, to stop receiving these messages, follow these opt-out instructions. Thanks, DPL bot (talk) 11:53, 30 September 2015 (UTC)[reply]

Your submission at Articles for creation: Droplet cluster has been accepted

Droplet cluster, which you submitted to Articles for creation, has been created.
The article has been assessed as C-Class, which is recorded on the article's talk page. You may like to take a look at the grading scheme to see how you can improve the article.

You are more than welcome to continue making quality contributions to Wikipedia. Note that because you are a logged-in user, you can create articles yourself, and don't have to post a request. However, you may continue submitting work to Articles for Creation if you prefer.

If you have any questions, you are welcome to ask at the help desk.
If you would like to help us improve this process, please consider leaving us some feedback.

Thank you for helping improve Wikipedia!

Jack Frost (talk) 01:54, 7 January 2018 (UTC)[reply]