Jump to content

Williams FJ44

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 210.107.226.17 (talk) at 05:18, 21 May 2018 (→Specification). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

FJ44
A Williams FJ44-3ATW turbofan engine
Type Turbofan
National origin United States
Manufacturer Williams International
First run 1985 [1]
Major applications Beechcraft Premier I
Cessna CitationJet
Piper PiperJet Altaire
Saab 105
Grob G180 SPn
Developed into Williams FJ33

The Williams FJ44 is a family of small, two-spool, turbofan engines produced by Williams International/Rolls-Royce for the light business jet market. Until the recent boom in the very light jet market, the FJ44 was one of the smallest turbofans available for civilian applications. Although basically a Williams design, Rolls-Royce was brought into the project, at an early stage, to design, develop and manufacture an air-cooled high-pressure (HP) turbine for the engine. The FJ44 first flew on July 12, 1988 on the Scaled Composites/Beechcraft Triumph aircraft.

The Williams FJ33 is a smaller engine based on the basic FJ44 design.

Design and development

Production started in 1992 with the 1900 lbf (8.45 kN) thrust FJ44-1A, which comprises a 20.9 in (531 mm) diameter single stage blisk fan plus a single intermediate pressure (IP) booster stage, driven by a 2 stage low pressure (LP) turbine, supercharging a single stage centrifugal high pressure (HP) compressor, driven by a single stage uncooled high pressure (HP) turbine. The combustor is an impingement cooled annular design. Fuel is delivered to the combustor through an unusual rotating fuel nozzle system, rather than the standard fuel-air mixers or vapourisers. The bypass duct runs the full length the engine. Specific fuel consumption at 1900 lbf (8.45 kN) thrust at SLS, ISA is understood to be 0.456 lb/(hr lbf). A derated version, the 1500 lbf (6.67 kN) thrust FJ44-1C has an SFC of 0.460 lb/(hr lbf).[2][3]

An uprated version, the 2300 lbf (10.23 kN) thrust FJ44-2A, was introduced in 1997. It has a larger 21.7 in (551 mm) diameter fan, with two additional booster stages to increase core flow. Owing to stressing considerations, the centrifugal compressor is throttled-back aerodynamically to a lower HPC pressure ratio than the -1. Other features include an exhaust mixer and an electronic fuel control unit.[4] The 2400 lbf (10.68 kN) thrust FJ44-2C is similar to the -2A, but incorporates an integrated hydromechanical fuel control unit.

Further updates include the 2004 introduction of the 2820 lbf (12.54 kN) thrust FJ44-3A, which is similar to the -2A, but features an increased diameter fan and dual channel FADEC (Full Authority Digital Engine Control) unit.[5] The 2490 lbf (11.08 kN) thrust FJ44-3A-24 is a derated version of the -3A.

In 2005, a new low end version, the FJ44-1AP, was introduced, with a 1965 lbf (8.74 kN) takeoff thrust, 5% better specific fuel consumption, and lower internal temperatures. The -1AP is similar to the -1A, except for a higher pressure ratio fan, a new combustor and LP turbine, a new full length bypass duct/exhaust mixer and a dual channel FADEC.[6]

Released in 2007 was the new 3600 lbf (16.01 kN) thrust FJ44-4, which has a hi-tech fan of larger diameter than the -3 unit.[7] As of March 2010, this engine was only in use on the Cessna CJ4.

Variants

FJ44-1A
FJ44-1AP
FJ44-1C
FJ44-2A
FJ44-2C
FJ44-3A
FJ44-3AP
FJ44-4A
FJ44-4M
F129
Military designation for a derated FJ44 with 1500lbf (6.672kN) power output.

Applications

L-39 with the FJ44-4M engine

Source:[8]

FJ44
trainer
business jet
Drone
Experimental
F129

Specification

FJ44 Specifications
FJ44-1A FJ44-1C FJ44-1AP FJ44-2A FJ44-2C FJ44-3A FJ44-3A-24 FJ44-4A FJ44-4M
Thrust (lbf) 1,900 1,500 1,965 2,300 2,400 2,820 2,490 3,600 3,790
Thrust (N) 8,452 6,672 8,741 10,231 10,676 12,544 11,076 16,014 16,890
Specific Fuel Consumption (lb/(hr lbf)) 0.456 0.460 - - - - - - -
Dry Weight (lb) 460 460 468 530 520 535 535 690 650
Dry Weight (kg) 209 209 212 240 236 243 243 304[9] 295
Overall Length (in) 53.3 53.3 57.9 59.8 59.8 62.4 62.4 68.6 68.6
Overall Length (mm) 1,354 1,354 1,471 1,519 1,519 1,585 1,585 1,742 1,742
Approximate Fan Diameter (in) 20.9 20.9 20.7 21.7 21.7 22.9 22.9 25.2 25.2
Approximate Fan Diameter (mm) 531 531 526 551 551 582 582 640 640
Bypass ratio 3.28[10] 3.28[10] - 4.1[10] - - - - -

See also

Related development

Related lists

References

  1. ^ "Williams Imagines Future Concept". Flight International. 12 October 1985. Retrieved 6 April 2017.
  2. ^ FJ44-1 at www.williams-int.com, Accessed 2006-05-07
  3. ^ FJ44 for military trainer aircraft at defence.rolls-royce.com, Accessed 2006-05-07
  4. ^ FJ44-2 at www.williams-int.com, Accessed 2006-05-07
  5. ^ FJ44-3 at www.williams-int.com, Accessed 2006-05-07
  6. ^ FJ44-1AP at www.williams-int.com, Accessed 2006-05-07
  7. ^ FJ44-4 at www.williams-int.com, Accessed 2010-03-12
  8. ^ Airplanes using FJ series engines at www.williams-int.com, Accessed 2006-05-07
  9. ^ [1]
  10. ^ a b c Venik's Aviation - Jet Engines - USA
Wikimedia Commons has media related to Williams FJ44.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Williams_FJ44&oldid=842242104"