Jump to content

Zintl phase

From Wikipedia, the free encyclopedia
(Redirected from Zintl cluster)

In chemistry, a Zintl phase is a product of a reaction between a group 1 (alkali metal) or group 2 (alkaline earth metal) and main group metal or metalloid (from groups 13, 14, 15, or 16). It is characterized by intermediate metallic/ionic bonding. Zintl phases are a subgroup of brittle, high-melting intermetallic compounds that are diamagnetic or exhibit temperature-independent paramagnetism and are poor conductors or semiconductors.[1]

This type of solid is named after German chemist Eduard Zintl who investigated them in the 1930s. The term "Zintl Phases" was first used by Laves in 1941.[2] In his early studies, Zintl noted that there was an atomic volume contraction upon the formation of these products and realized that this could indicate cation formation. He suggested that the structures of these phases were ionic, with complete electron transfer from the more electropositive metal to the more electronegative main group element.[1] The structure of the anion within the phase is then considered on the basis of the resulting electronic state. These ideas are further developed in the Zintl-Klemm-Busmann concept, where the polyanion structure should be similar to that of the isovalent element. Further, the anionic sublattice can be isolated as polyanions (Zintl ions) in solution and are the basis of a rich subfield of main group inorganic chemistry.

History

[edit]

A "Zintl Phase" was first observed in 1891 by M. Joannis, who noted an unexpected green colored solution after dissolving lead and sodium in liquid ammonia, indicating the formation of a new product.[3] It was not until many years later, in 1930, that the stoichiometry of the new product was identified as Na4Pb94− by titrations performed by Zintl et al.;[4] and it was not until 1970 that the structure was confirmed by crystallization with ethylenediamine (en) by Kummer.[5]

In the intervening years and in the years since, many other reaction mixtures of metals were explored to provide a great number of examples of this type of system. There are hundreds of both compounds composed of group 14 elements and group 15 elements, plus dozens of others beyond those groups, all spanning a variety of different geometries.[6] Corbett has contributed improvements to the crystallization of Zintl ions by demonstrating the use of chelating ligands, such as cryptands, as cation sequestering agents.[7]

More recently, Zintl phase and ion reactivity in more complex systems, with organic ligands or transition metals, have been investigated, as well as their use in practical applications, such as for catalytic purposes or in materials science.

Zintl phases

[edit]

Zintl phases are intermetallic compounds that have a pronounced ionic bonding character. They are made up of a polyanionic substructure and group 1 or 2 counter ions, and their structure can be understood by a formal electron transfer from the electropositive element to the more electronegative element in their composition. Thus, the valence electron concentration (VEC) of the anionic element is increased, and it formally moves to the right in its row of the periodic table. Generally the anion does not reach an octet, so to reach that closed shell configuration, bonds are formed. The structure can be explained by the 8-N rule (replacing the number of valence electrons, N, by VEC), making it comparable to an isovalent element.[8] The formed polyanionic substructures can be chains (two-dimensional), rings, and other two-or three-dimensional networks or molecule-like entities.

The Zintl line is a hypothetical boundary drawn between groups 13 and 14. It separates the columns based on the tendency for group 13 elements to form metals when reacted with electropositive group 1 or 2 elements and for group 14 and above to form ionic solids.[9] The 'typical salts' formed in these reactions become more metallic as the main group element becomes heavier.[8]

A periodic table illustrating the location of the Zintl line.

Synthesis

[edit]

Zintl phases can be prepared in regular solid state reactions, usually performed under an inert atmosphere or in a molten salt solution. Typical solid state methods include direct reduction of corresponding oxides in solution phase reactions in liquid ammonia or mercury. The product can be purified in some cases via zone refining, though often careful annealing will result in large single crystals of a desired phase.[8]

Characterization

[edit]

Many of the usual methods are useful for determining physical and structural properties of Zintl phases. Some Zintl phases can be decomposed into a Zintl ion—the polyanion that composes the anionic substructure of the phase—and counter ion, which can be studied as described below. The heat of formation of these phases can be evaluated. Often their magnitude is comparable to those of salt formation, providing evidence for the ionic character of these phases.[8] Density measurements indicate a contraction of the product compared to reactants, similarly indicating ionic bonding within the phase.[10] X-ray spectroscopy gives additional information about the oxidation state of the elements, and correspondingly the nature of their bonding. Conductivity and magnetization measurements can also be taken. Finally, the structure of a Zintl phase or ion is most reliably confirmed via X-ray crystallography.

Examples

[edit]

An illustrative example: There are two types of Zintl ions in K12Si17; 2x Si4−
4
(pseudo P4, or according to Wade's rules, 12 = 2n + 4 skeletal-electrons corresponding to a nido-form of a trigonal-bipyramid) and 1x Si4−
9
(according to Wade's rules, 22 = 2n + 4 skeletal-electrons corresponding to a nido-form of a bicapped square antiprism)

Examples from Müller's 1973 review paper with known structures are listed in the table below.[8]

Cation/Anion group III IV V VI VII
Li Li3Al

Li9Al4 LiGa LiIn LiTl

Li22Si5

Li7Si2 Li22Ge5

Li9Ge4 Li22Sn5

Li2Sn5

Li3P LiP Li3P7 LiP4 LiP5 LiP7 LiP15

Li3As LiAs Li3Sb Li3Bi LiBi

Li2S

Li2Se Li2Te

LiCl

LiBr LiI

Na NaGa4

NaIn Na2Tl (the polyanion is tetrahedral (Tl4)8- Concept Tl2- ~ P)

NaTl (See Figure)

NaSi (the polyanion is tetrahedral (Si4)4- Concept Si- ~ P)

NaxSi136 (x ≤ 11) Na8Si NaGe Na15Pb4 Na13Pb5

Na9Pb4 NaPb

Na3P NaP Na3P7 Na3P11 NaP7 NaP15

Na3As Na3Sb NaSb Na3Bi NaBi

Na2S

Na2Se Na2Se2

Na2Te

NaCl

NaBr NaI

K KIn4 K12Si17

K8Si46 K8Ge46 K8Sn46

KPb KPb2

K3P KP K4P6 K3P7 K3P11 KP15

K3As K3Sb KBi2

K2S

K2S2 K2Se

K2Se2 K2Te

KCl

KBr KI

Rb RbIn4 RbSi

RbGe RbSn RbPb

Rb4P6 Rb3P7 Rb3P11 RbP7 RbP11 RbP15

Rb3As Rb3Bi RbBi2

Rb2S RbCl

RbBr RbI

Cs CsSi

CsGe CsSn CsPb

Cs2P4 Cs4P6 Cs3P7 Cs3P11 CsP7 CsP11 CsP15

Cs3Sb Cs3Bi CsBi2

Cs2NaAs7 (See Figure)

CsCl

CsBr CsI

Mg Mg17Al12

Mg5Ga2 Mg2Ga

MgGa MgGa2 Mg2Ga5 Mg3In

Mg5In2 Mg2In

MgIn MgIn5 Mg2Tl MgTl

Mg2Si

Mg2Ge Mg2Sn

Mg2Pb

Mg3P2

Mg3As2 Mg3Sb2

Mg3Bi2

MgS

MgSe MgTe MgTe2

MgCl2

MgBr2 MgI2

Ca CaAl2

CaAl4 CaGa CaGa2 CaGa4 CaIn CaIn2 CaTl CaTl3

CaSi

CaSi2 Ca7Ge

Ca2Ge CaGe2 Ca3Sn Ca2Sn

CaSn CaSn3 Ca3Pb Ca2Pb

Ca5Pb3

CaS

CaSe CaTe

CaCl2

CaBr2 CaI2

Sr SrAl2

SrGa2 SrGa4 SrIn2 SrTl SrTl2 SrTl3

Sr5Si3

SrSi Sr4Si7

SrSi2 Sr3Ge4

SrGe2 SrSn SrPb3

Sr3P2

Sr3P14 SrBi3

SrS

SrSe SrTe

SrCl2

SrBr2 SrI2

Ba BaAl4

BaGa2 BaGa4 BaIn2 BaIn4 BaTl2

Ba5Si3

BaSi Ba3Si4

BaSi2 Ba2Ge

BaGe BaGe2 BaSn Ba5Pb3

BaPb BaPb3

Ba3P2

BaP3 BaBi3

BaS

BaS3 BaSe BaTe

BaCl2

BaBr2 BaI2

Structure of [As7]3− subunit in the Zintl phase Cs2NaAs7. The trianion adopts the structure of P4S3. Concept: As ~ S.[11]
Diamondoid framework of Tl ions in NaTl. NaTl consists of a polyanion (—Tl—)n with a covalent diamond structure. Na+ ions are located between the anions. Concept: Tl ~ C.[12]

Exceptions

[edit]

There are examples of a new class of compounds that, on the basis of their chemical formulae, would appear to be Zintl phases, e.g., K8In11, which is metallic and paramagnetic. Molecular orbital calculations have shown that the anion is (In11)7− and that the extra electron is distributed over the cations and, possibly, the anion antibonding orbitals.[13] Another exception is the metallic InBi. InBi fulfills the Zintl phase requisite of element-element bonds but not the requisite of the polyanionic structure fitting a normal valence compound, i.e., the Bi–Bi polyanionic structure does not correspond to a normal valence structure such as the diamond Tl in NaTl.[14]

The crystal structure of InBi with and without the In–Bi bonds to highlight the Bi–Bi polyanionic structure.

Zintl ions

[edit]

Zintl phases that contain molecule-like polyanions will often separate into its constituent anions and cations in liquid ammonia, ethylenediamene, crown ethers, or cryptand solutions. Therefore, they are referred to as Zintl ions. The term 'clusters' is also used to emphasize them as groups with homonuclear bonding. The structures can be described by Wade's rules and occupy an area of transition between localized covalent bonds and delocalized skeletal bonding.[15] Beyond the "aesthetic simplicity and beauty of their structures" and distinctive electronic properties, Zintl ions are also of interest in synthesis because of their unique and unpredictable behavior in solution.[15]

The largest subcategory of Zintl ions is homoatomic clusters of group 14 or 15 elements. Some examples are listed below.[15][16]

Many examples similarly exist for heteroatomic clusters where the polyanion is composed of greater than one main group element. Some examples are listed below.[15][16] Zintl ions are also capable of reacting with ligands and transition metals, and further 'heteroatomic examples are discussed below (intermetalloid clusters). In some solvents, atoms exchange can occur between heteroatomic clusters.[17] Additionally, it is notable that fewer large cluster examples exist.[15]

Examples

[edit]

Homoatomic clusters

[edit]
  • [Si4]4−
  • [Si5]2−
  • [Si9]2−
  • [Si9]4−
  • [Ge4]4−
  • [Ge5]2−
  • [Ge9]3−
  • [Sn4]4−
  • [Sn5]2−
  • [Pb4]4−
  • [Pb9]4−
  • [P4]2−
  • [P7]3−
  • [P11]3−
  • [As6]4−
  • [As7]3−
  • [Sb8]8−
  • [Sb11]3−
  • [Bi4]2−
  • [Bi7]3−
  • [Bi11]3−

Heteroatomic clusters

[edit]
  • AsP3
  • [Ge2Sn2]4−
  • [Sn2Bi2]2−
  • [Sn3Bi3]5−
  • [Pb2Sb2]2−
  • Sn5Sb3
  • [InBi3]2−
  • Bi14Ge4
  • [GaBi3]2−
  • [In4Bi5]3−
  • [TlSn8]3−
  • [TlSn9]3−
  • [Sb@In8Sb12]3−
  • [Sb@In8Sb12]5−

Synthesis

[edit]

Zintl ions are typically prepared through one of two methods. The first is a direct reduction route performed at low temperature. In this method, dry ammonia is condensed over a mixture of the two (or more) metals under inert atmosphere. The reaction initially produces solvated electrons in ammonia that reduce the more electronegative element over the course of the reaction. This reaction can be monitored by a color change from blue (solvated electrons) to the color of the Zintl phase. The second is method, performed at higher temperatures, is to dissolve a Zintl phase in liquid ammonia or other polar aprotic solvent like ethylenediamine (on rare occasions DMF or pyridine is used).[18] Some Zintl ions, such as Si and Ge based ions, can only be prepared via this indirect method because they cannot be reduced at low temperatures.[18]

Characterization

[edit]

The structure of Zintl ions can be confirmed through x-ray crystallography. Corbett has also improved the crystallization of Zintl ions by demonstrating the use of chelating ligands such as cryptands, as cation sequestering agents.[7]

Many of the main group elements have NMR active nuclei, thus NMR experiments are also valuable for gaining structural and electronic information; they can reveal information about the flexibility of clusters. For example, differently charged species can be present in solution because the polyanions are highly reduced and may be oxidized by solvent molecules. NMR experiments have shown a low barrier to change and thus similar energies for different states.[17] NMR is also useful for gaining information about the coupling between individual atoms of the polyanion and with the counter-ion, a coordinated transition metal, or ligand. Nucleus independent chemical shifts can also be an indicator for 3D aromaticity, which causes magnetic shielding at special points.

Additionally, EPR can be used to measure paramagnetic in relevant clusters, of which there are a number of examples of the [E9]3− type, among others.[19]

Reactivity

[edit]

As highly reduced species in solution, Zintl ions offer many and often unexpected, reaction possibilities, and their discrete nature positions them as potentially important starting materials in inorganic synthesis.[18]

In solution, individual Zintl ions can react with each other to form oligomers and polymers. In fact, anions with high nuclearity can be viewed as oxidative coupling products of monomers.[20] After oxidation, the clusters may sometimes persist as radicals that can be used as precursors in other reactions. Zintl ions can oxidize without the presence of specific oxidizing agents through solvent molecules or impurities, for example in the presence of cryptand, which is often used to aid crystallization.[15]

Zintl ion clusters can be functionalized with a variety of ligands in a similar reaction to their oligomerization. As such, functionalization competes with those reactions and both can be observed to occur. Organic groups, for example phenyl, TMS, and bromomethane, form exo bonds to the electronegative main group atoms. These ligands can also stabilize high nuclearity clusters, in particular heteroatomic examples.[15]

Similarly in solids, Zintl phases can incorporate hydrogen. Such Zintl phase hydrides can be either formed by direct synthesis of the elements or element hydrides in a hydrogen atmosphere or by a hydrogenation reaction of a pristine Zintl phase. Since hydrogen has a comparable electronegativity as the post-transition metal it is incorporated as part of the polyanionic spatial structure. There are two structural motifs present. A monatomic hydride can be formed occupying an interstitial site that is coordinated by cations exclusively (interstitial hydride) or it can bind covalently to the polyanion (polyanionic hydride).[21]

The Zintl ion itself can also act as a ligand in transition metal complexes. This reactivity is usually seen in clusters composed of greater than 9 atoms, and it is more common for group 15 clusters. A change in geometry often accompanies complexation; however zero electrons are contributed from the metal to the complex, so the electron count with respect to Wade's rules does not change.[15] In some cases the transition metal will cap the face of the cluster. Another mode of reaction is the formation of endohedral complexes where the metal is encapsulated inside the cluster. These types of complexes lend themselves to comparison with the solid state structure of the corresponding Zintl phase.[16] These reactions tend to be unpredictable and highly dependent on temperature, among other reaction conditions.

Examples

[edit]
  • Group 14 anions functionalized with organic groups: [Ge9Mes]3−, [Ge9(CHCHCH2NH2)2]2−, [(CH2CH)Ge9Ge9(CHCH2)]4−, [Ge9(CHCHCHCH)Ge9]6−, [(CH2CH)Ge9(CH)4Ge9(CHCH2)]4−;
  • Silated anions: Ge9Hyp3Tl, [Ge9Hyp3];
  • Intermetalloid deltahedral clusters: [Co@Sn9]4−, [Ni@Pb10]2−, [Au@Pb12]3−, [Mn@Pb12]3−, [Rh3@Sn24]5−;
  • Exo coordinated transition metal complexes: [(ŋ2-Sn9)Hg(ŋ2-Sn9)]6−, [Ge5Ni2(CO)3]2−, [Sn8TiCp]3−, [(tol)NbSn6Nb(tol)]2−;
  • [Ni5Sb17]4− (Ni4Sb4 ring inside Sb13 bowl).

Electronic structure and bonding

[edit]

Wade's rules

[edit]

The geometry and bonding of a Zintl ion cannot be easily described by classical two electron two center bonding theories; however the geometries Zintl ions can be well described by Wade’s rules of boranes. Wade’s rules offer an alternative model for the relationship between geometry and electron count in delocalized electron deficient systems. The rules were developed to predict the geometries of boranes from the number of electrons and can be applied to these polyanions by replacing the BH unit with a lone pair.[18] Some unique clusters of Ge occur in non-deltahedral shapes that cannot be described by Wade’s rules. The rules also become more convoluted in intermetallic clusters with transition metals and consideration needs to be taken for the location of the additional electrons.

Zintl-Klemm-Busmann concept

[edit]

The Zintl-Klemm-Busmann concept describes how in an anionic cluster, the atoms arrange in typical geometries found for the element to the right of it on the periodic table. So “the anionic lattice is isometric with elemental lattices having the same number of valence electrons.”[8] In this formulation, the average charge on each atom of the cluster can be calculated by:

where na is number of anion atoms and VEC is the valence electron concentration per anion atom, then:

.[18]

The number of bonds per anion predicts structure based on isoelectronic neighbor. This rule is also referred to as the 8 - N rule and can also be written as:

.

Not all phases follow the Zintl-Klemm-Busmann concept, particularly when there is a high content of either the electronegative or electropositive element. There are still other examples where this does not apply.[8]

Electronic theory

[edit]

Wade's rules are successful in describing the geometry of the anionic sublattice of Zintl phases and of Zintl ions but not the electronic structure. Other 'spherical shell models' with spherical harmonic wave functions for molecular orbitals—analogous to atomic orbitals—that describe the clusters as pseduo elements. The Jellium model uses a spherical potential from the nuclei to give orbitals with global nodal properties. Again, this formulates the cluster as a 'super atom' with an electron configuration comparable to a single atom. The model is best applied to spherically symmetric systems, and two examples for which it works well are the icosahedral Al13 and [Sn@Cu12@Sn20]12− clusters.[22][23] DFT or ab initio molecular orbital calculations similarly treat the clusters with atomic, and correspondingly label them S, P, D etc. These closed shell configurations have prompted some investigation of 3D aromaticity. This concept was first suggested for fullerenes and corresponds to a 2(N+1)2 rule in the spherical shell model. An indicator of this phenomenon is a negative Nucleus Independent Chemical Shift (NICS) values of the center of the cluster or of certain additional high symmetry points.[16]

Use in catalysis and materials science

[edit]

Some Zintl ions show the ability to activate small molecules. One example from Dehnen and coworkers is the capture of O2 by the intermetallic cluster [Bi9{Ru(cod)}2]3−.[24] Another ruthenium intertermetallic cluster, [Ru@Sn9]6−, was used as a precursor to selectively disperse the CO2 hydrogenation catalyst Ru-SnOx onto CeO2, resulting in nearly 100% CO selectivity for methanation.[25]

In materials science, Ge94− has been used as a source of Ge in lithium ion batteries, where is can be deposited in a microporous layer of alpha-Ge.[26] The discrete nature of Zintl ions opens the possibility for the bottom up synthesis of nanostructured semiconductors and the surface modification of solids.[15] The oxidation and polymerization of Zintl ions may also be a source of new materials. For example, polymerization of Ge clusters was used to create guest free germanium clathrate, in other words a particular, pure Ge.[27]

See also

[edit]

References

[edit]
  1. ^ a b Sevov, S.C., Zintl Phases in Intermetallic Compounds, Principles and Practice: Progress, Westbrook, J.H.; *Freisher, R.L.: Eds.; John Wiley & Sons. Ltd., Chichester, England, 2002, pp. 113-132 Slavi Chapter
  2. ^ Laves F (1941) Naturwissenschaften 29:244 (Eduard Zintls Arbeiten über die Chemie und Struktur von Legierungen)
  3. ^ M. Joannis, Hebd. Seances Acad. Sci. 1891, 113, 795.
  4. ^ Zintl, E; Goubeau, J; Dullenkopf, W (1931). "Metals and alloys. I. Salt-like compounds and intermetallic phases of sodium in liquid ammonia". Z. Phys. Chem. A (154): 1–46.
  5. ^ Diehl, Lothar; Khodadadeh, Keyumarss; Kummer, Dieter; Strähle, Joachim (October 1976). "Anorganische Polyederverbindungen, III. Zintl's "Polyanionige Salze"︁: Darstellung und Eigenschaften der kristallinen Verbindungen [Na4·7 en]Sn9, [Na4·5 en]Ge9 und [Na3·4 en]Sb7 und ihrer Lösungen Die Kristallstruktur von [Na4·7 en]Sn9". Chemische Berichte. 109 (10): 3404–3418. doi:10.1002/cber.19761091018.
  6. ^ zintl ions 14 15 review
  7. ^ a b Corbett, John D.; Adolphson, Douglas G.; Merryman, Don J.; Edwards, Paul A.; Armatis, Frank J. (October 1, 1975). "Synthesis of stable homopolyatomic anions of antimony, bismuth, tin, and lead. Crystal structure of a salt containing the heptaantimonide(3-) anion". Journal of the American Chemical Society. 97 (21): 6267–6268. doi:10.1021/ja00854a066. ISSN 0002-7863.
  8. ^ a b c d e f g Schäfer, Herbert; Eisenmann, Brigitte; Müller, Wiking (September 1973). "Zintl Phases: Transitions between Metallic and Ionic Bonding". Angewandte Chemie International Edition in English. 12 (9): 694–712. doi:10.1002/anie.197306941.
  9. ^ Gärtner, S.; Korber, N. (2013-01-01), Reedijk, Jan; Poeppelmeier, Kenneth (eds.), "1.09 - Zintl Anions", Comprehensive Inorganic Chemistry II (Second Edition), Amsterdam: Elsevier, pp. 251–267, doi:10.1016/b978-0-08-097774-4.00110-8, ISBN 978-0-08-096529-1, retrieved 2022-12-13
  10. ^ W Biftz and F. Weibke, Z. Anorg. Allg. Chem. 223, 321 (3935)
  11. ^ He H, Tyson C, Bobev S (2011). "New compounds with (As7)3- Clusters: Synthesis and Crystal Structures of the Zintl Phases Cs2NaAs7, Cs4ZnAs14 and Cs4CdAs14". Crystals. 1 (3): 87–p98. doi:10.3390/cryst1030087.
  12. ^ S.M. Kauzlarich, Encyclopedia of Inorganic chemistry, 1994, John Wiley & Sons, ISBN 0-471-93620-0
  13. ^ Sevov, Slavi C.; Corbett, John D. (December 1, 1991). "A remarkable hypoelectronic indium cluster in K8In11". Inorganic Chemistry. 30 (26): 4875–4877. doi:10.1021/ic00026a004. ISSN 0020-1669.
  14. ^ Mller, Ulrich (2006-10-06). Inorganic Structural Chemistry. Chichester, UK: John Wiley & Sons, Ltd. doi:10.1002/9780470057278.ch13. ISBN 978-0-470-05727-8.
  15. ^ a b c d e f g h i Scharfe, Sandra; Kraus, Florian; Stegmaier, Saskia; Schier, Annette; Fässler, Thomas F. (2011-04-11). "Zintl Ions, Cage Compounds, and Intermetalloid Clusters of Group 14 and Group 15 Elements". Angewandte Chemie International Edition. 50 (16): 3630–3670. doi:10.1002/anie.201001630. PMID 21455921.
  16. ^ a b c d Qiao, Lei; McGrady, John E.; Sun, Zhong-Ming (2021-01-01), "Zintl chemistry: From Zintl ions to Zintl clusters", Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, Elsevier, doi:10.1016/b978-0-12-823144-9.00014-5, ISBN 978-0-12-409547-2, S2CID 239941189, retrieved 2022-12-14
  17. ^ a b Rudolph, R. W.; Wilson, W. L.; Parker, F.; Taylor, R. Craig; Young, D. C. (July 1, 1978). "Nature of naked-metal-cluster polyanions in solution. Evidence for (Sn9-xPbx)4-(x = 0-9) and tin-antimony clusters". Journal of the American Chemical Society. 100 (14): 4629–4630. doi:10.1021/ja00482a069. ISSN 0002-7863.
  18. ^ a b c d e Gärtner, S.; Korber, N. (2013-01-01), Reedijk, Jan; Poeppelmeier, Kenneth (eds.), "1.09 - Zintl Anions", Comprehensive Inorganic Chemistry II (Second Edition), Amsterdam: Elsevier, pp. 251–267, doi:10.1016/b978-0-08-097774-4.00110-8, ISBN 978-0-08-096529-1, retrieved 2022-12-13
  19. ^ Scharfe, Sandra; Fässler, Thomas F. (2010). "Polyhedral nine-atom clusters of tetrel elements and intermetalloid derivatives". Philosophical Transactions: Mathematical, Physical and Engineering Sciences. 368 (1915): 1265–1284. Bibcode:2010RSPTA.368.1265S. doi:10.1098/rsta.2009.0270. ISSN 1364-503X. JSTOR 25663317. PMID 20156825. S2CID 12820790.
  20. ^ G. Fritz, H. W. Schneider, W. Hönle, H.-G. von Schnering, Z. Naturforsch. B 1988, 43, 561.
  21. ^ Häussermann, Ulrich; Kranak, Verina F.; Puhakainen, Kati (2011), Fässler, Thomas F. (ed.), "Hydrogenous Zintl Phases: Interstitial Versus Polyanionic Hydrides", Zintl Phases: Principles and Recent Developments, Berlin, Heidelberg: Springer, pp. 143–161, doi:10.1007/430_2010_20, ISBN 978-3-642-21150-8, retrieved 2022-12-16
  22. ^ Reber, Arthur C.; Khanna, Shiv N.; Castleman, A. Welford (2007-08-01). "Superatom Compounds, Clusters, and Assemblies: Ultra Alkali Motifs and Architectures". Journal of the American Chemical Society. 129 (33): 10189–10194. doi:10.1021/ja071647n. ISSN 0002-7863. PMID 17655299.
  23. ^ Stegmaier, Saskia; Fässler, Thomas F. (2011-12-14). "A Bronze Matryoshka: The Discrete Intermetalloid Cluster [Sn@Cu 12 @Sn 20 ] 12– in the Ternary Phases A 12 Cu 12 Sn 21 (A = Na, K)". Journal of the American Chemical Society. 133 (49): 19758–19768. doi:10.1021/ja205934p. ISSN 0002-7863. PMID 21961732.
  24. ^ Lichtenberger, Niels; Spang, Nils; Eichhöfer, Andreas; Dehnen, Stefanie (2017-10-16). "Between Localization and Delocalization: Ru(cod) 2+ Units in the Zintl Clusters [Bi 9 {Ru(cod)} 2 ] 3− and [Tl 2 Bi 6 {Ru(cod)}] 2−". Angewandte Chemie International Edition. 56 (43): 13253–13258. doi:10.1002/anie.201707632. PMID 28834005.
  25. ^ Wang, Yanru; Zhang, Chao; Wang, Xiuyi; Guo, Jinqiu; Sun, Zhong-Ming; Zhang, Hongbo (2020-07-17). "Site-Selective CO 2 Reduction over Highly Dispersed Ru-SnO x Sites Derived from a [Ru@Sn 9 ] 6– Zintl Cluster". ACS Catalysis. 10 (14): 7808–7819. doi:10.1021/acscatal.0c01253. ISSN 2155-5435. S2CID 225729672.
  26. ^ Geier, Sebastian; Jung, Roland; Peters, Kristina; Gasteiger, Hubert A.; Fattakhova-Rohlfing, Dina; Fässler, Thomas F. (2017-12-19). "A wet-chemical route for macroporous inverse opal Ge anodes for lithium ion batteries with high capacity retention". Sustainable Energy & Fuels. 2 (1): 85–90. doi:10.1039/C7SE00422B. ISSN 2398-4902.
  27. ^ Guloy, Arnold M.; Ramlau, Reiner; Tang, Zhongjia; Schnelle, Walter; Baitinger, Michael; Grin, Yuri (September 21, 2006). "A guest-free germanium clathrate". Nature. 443 (7109): 320–323. Bibcode:2006Natur.443..320G. doi:10.1038/nature05145. ISSN 1476-4687. PMID 16988708. S2CID 4366188.

Additional resources

[edit]