alias (command)
This article needs additional citations for verification. (July 2013) |
![]() Example of alias command | |
Original author(s) | Bill Joy |
---|---|
Developer(s) | Various open-source and commercial developers |
Operating system | Unix, Unix-like, AmigaDOS, FreeDOS, Microsoft Windows, ReactOS, AROS, KolibriOS, IBM i |
Platform | Cross-platform |
Type | Command |
In computing, alias is a command in various command-line interpreters (shells), which enables a replacement of a word by another string.[1] It is mainly used for abbreviating a system command, or for adding default arguments to a regularly used command. alias
is available in Unix shells, AmigaDOS, 4DOS/4NT, FreeDOS, KolibriOS, Windows PowerShell, ReactOS, and the EFI shell.[2] Aliasing functionality in the MS-DOS and Microsoft Windows operating systems is provided by the DOSKey command-line utility.
An alias will last for the life of the shell session. Regularly used aliases can be set from the shell's rc file (such as .bashrc
) so that they will be available upon the start of the corresponding shell session. The alias commands may either be written in the config file directly or sourced from a separate file.
History
[edit]In Unix, aliases were introduced in the C shell and survive in descendant shells such as tcsh and bash. C shell aliases were strictly limited to one line. This was useful for creating simple shortcut commands, but not more complex constructs. Older versions of the Bourne shell did not offer aliases, but it did provide functions, which are more powerful than the csh alias concept. The alias concept from csh was imported into Bourne Again Shell (bash) and the Korn shell (ksh). With shells that support both functions and aliases but no parameterized inline shell scripts, the use of functions wherever possible is recommended. Cases where aliases are necessary include situations where chained aliases are required (bash and ksh). The alias command has also been ported to the IBM i operating system.[3]
Usage
[edit]Creating aliases
[edit]Common Unix shells
[edit]Non-persistent aliases can be created by supplying name/value pairs as arguments for the alias command. In Unix shells the syntax is:
alias gc='git commit'
C shell
[edit]The corresponding syntax in the C shell or tcsh shell is:
alias gc "git commit"
This alias means that when the command gc
is read in the shell, it will be replaced with git commit
and that command will be executed instead.
4DOS
[edit]In the 4DOS/4NT shell the following syntax is used to define cp
as an alias for the 4DOS copy
command:
alias cp copy
Windows PowerShell
[edit]To create a new alias in Windows PowerShell, the new-alias
cmdlet can be used:
new-alias ci copy-item
This creates a new alias called ci
that will be replaced with the copy-item
cmdlet when executed.
In PowerShell, an alias cannot be used to specify default arguments for a command. Instead, this must be done by adding items to the collection $PSDefaultParameterValues, one of the PowerShell preference variables.
Viewing currently defined aliases
[edit]To view defined aliases the following commands can be used:
alias # Used without arguments; displays a list of all current aliases
alias -p # List aliases in a way that allows re-creation by sourcing the output; not available in 4DOS/4NT and PowerShell
alias myAlias # Displays the command for a defined alias
Overriding aliases
[edit]In Unix shells, it is possible to override an alias by quoting any character in the alias name when using the alias. For example, consider the following alias definition:
alias ls='ls -la'
To override this alias and execute the ls
command as it was originally defined, the following syntax can be used:
'ls'
or
\ls
In the 4DOS/4NT shell it is possible to override an alias by prefixing it with an asterisk. For example, consider the following alias definition:
alias dir = *dir /2/p
The asterisk in the 2nd instance of dir
causes the unaliased dir
to be invoked, preventing recursive alias expansion. Also the user can get the unaliased behaviour of dir
at the command line by using the same syntax:
*dir
Changing aliases
[edit]In Windows PowerShell, the set
verb can be used with the alias
cmdlet to change an existing alias:
set-alias ci cls
The alias ci
will now point to the cls
command.
In the 4DOS/4NT shell, the eset
command provides an interactive command line to edit an existing alias:
eset /a cp
The /a
causes the alias cp
to be edited, as opposed to an environment variable of the same name.
Removing aliases
[edit]In Unix shells and 4DOS/4NT, aliases can be removed by executing the unalias
command:
unalias copy # Removes the copy alias
unalias -a # The -a switch will remove all aliases; not available in 4DOS/4NT
unalias * # 4DOS/4NT equivalent of `unalias -a` - wildcards are supported
In Windows PowerShell, the alias can be removed from the alias:\ drive using remove-item
:
remove-item alias:ci # Removes the ci alias
Features
[edit]Chaining
[edit]An alias usually replaces just the first word. But some shells, such as bash
and ksh
, allow a sequence or words to be replaced. This particular feature is unavailable through the function mechanism.
The usual syntax is to define the first alias with a trailing space character. For instance, using the two aliases:
alias list='ls ' # note the trailing space to trigger chaining
alias long='-Flas' # options to ls for a long listing
allows:
list long myfile # becomes "ls -Flas myfile" when run
for a long listing, where "long" is also evaluated as an alias.
Command arguments
[edit]In the C Shell, arguments can be embedded inside the command using the string \!*. For example, with this alias:
alias ls-more 'ls \!* | more'
ls-more /etc /usr
expands to ls /etc /usr | more
to list the contents of the directories /etc and /usr, pausing after every screenful. Without \!*,
alias ls-more 'ls | more'
would instead expand to ls | more /etc /usr
which incorrectly attempts to open the directories in more.[4]
The Bash and Korn shells instead use shell functions — see § Alternatives below.
Alternatives
[edit]Aliases should usually be kept simple. Where it would not be simple, the recommendation is usually to use one of the following:
- Shell scripts, which essentially provide the full ability to create new system commands.
- Symbolic links in the user's
PATH
(such as/bin
). This method is useful for providing an additional way of calling the command, and in some cases may allow access to a buried command function for the small number of commands that use their invocation name to select the mode of operation. - Shell functions, especially if the command being created needs to modify the internal runtime environment of the shell itself (such as environment variables), needs to change the shell's current working directory, or must be implemented in a way which guarantees they it appear in the command search path for anything but an interactive shell (especially any "safer" version of
rm
,cp
,mv
and so forth).
The most common form of aliases, which just add a few options to a command and then include the rest of the command line, can be converted easily to shell functions following this pattern:
alias ll='ls -Flas' # long listing, alias
ll () { ls -Flas "$@" ; } # long listing, function
To prevent a function from calling itself recursively, use command
:
ls () { command ls --color=auto "$@" ; }
In older Bourne shells use /bin/ls
instead of command ls
.
References
[edit]- ^ Rugheimer, Hannes (2020-06-10). AmigaDOS quick reference : Rügheimer, Hannes : Free Download, Borrow, and Streaming : Internet Archive. ISBN 9781557550491. Retrieved 2020-09-12 – via Internet Archive.
- ^ "EFI Shells and Scripting". Intel. Retrieved 2013-09-25.
- ^ IBM. "IBM System i Version 7.2 Programming Qshell" (PDF). IBM. Retrieved 2020-09-05.
- ^ "Examples of passing arguments given to a command alias". UNIXhelp. University of Edinburgh. Archived from the original on 2012-11-25.
Further reading
[edit]- McElhearn, Kirk (2006). The Mac OS X Command Line: Unix Under the Hood. John Wiley & Sons. ISBN 978-0470113851.
External links
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/df/Wikibooks-logo-en-noslogan.svg/40px-Wikibooks-logo-en-noslogan.svg.png)
- The Single UNIX Specification, Version 4 from The Open Group : define or display aliases – Shell and Utilities Reference,
- Bash man page for alias
- The alias Command by The Linux Information Project (LINFO)