Clustered file system
|This article may need to be rewritten entirely to comply with Wikipedia's quality standards. (December 2013)|
A clustered file system is a file system which is shared by being simultaneously mounted on multiple servers. There are several approaches to clustering, most of which do not employ a clustered file system (only direct attached storage for each node). Clustered file systems can provide features like location-independent addressing and redundancy which improve reliability or reduce the complexity of the other parts of the cluster. Parallel file systems are a type of clustered file system that spread data across multiple storage nodes, usually for redundancy or performance.
A shared-disk filesystem uses a storage-area network (SAN) to provide direct disk access from multiple computers at the block level. Access control and translation from file-level operations that applications use to block-level operations used by the SAN must take place on the client node. The most common type of clustered filesystems is shared-disk filesystem, which—by adding mechanisms for concurrency control—provides a consistent and serializable view of the file system, avoiding corruption and unintended data loss even when multiple clients try to access the same files at the same time. It is a common practice for shared-disk filesystems to employ some sort of a fencing mechanism to prevent data corruption in case of node failures, because an unfenced device can cause data corruption if it loses communication with its sister nodes, and tries to access the same information other nodes are accessing.
There are different architectural approaches to a shared-disk filesystem. Some distribute file information across all the servers in a cluster (fully distributed). Others utilize a centralized metadata server. Both achieve the same result of enabling all servers to access all the data on a shared storage device.
- Silicon Graphics (SGI) clustered file system (CXFS)
- Veritas Cluster File System
- DataPlow Nasan File System
- DataPlow SAN File System (SFS)
- IBM General Parallel File System (GPFS)
- Microsoft Cluster Shared Volumes (CSV)
- Oracle Cluster File System (OCFS)
- PolyServe storage solutions
- Quantum StorNext FileSystem (SNFS), ex ADIC, ex CentraVision FileSystem (CVFS)
- Blue Whale Clustered file system (BWFS)
- Red Hat Global File System (GFS)
- Sanbolic Melio FS clustered file system
- Sun QFS
- TerraScale Technologies TerraFS
- VMware VMFS
Distributed file systems
Distributed file systems do not share block level access to the same storage but use a network protocol. These are commonly known as network file systems, even though they are not the only file systems that use the network to send data. Distributed file systems can restrict access to the file system depending on access lists or capabilities on both the servers and the clients, depending on how the protocol is designed.
The difference between a distributed file system and a distributed data store is that a distributed file system allows files to be accessed using the same interfaces and semantics as local files - e.g. mounting/unmounting, listing directories, read/write at byte boundaries, system's native permission model. Distributed data stores, by contrast, require using a different API or library and have different semantics (most often those of a database).
Distributed file systems may aim for "transparency" in a number of aspects. That is, they aim to be "invisible" to client programs, which "see" a system which is similar to a local file system. Behind the scenes, the distributed file system handles locating files, transporting data, and potentially providing other features listed below.
- Access transparency is that clients are unaware that files are distributed and can access them in the same way as local files are accessed.
- Location transparency; a consistent name space exists encompassing local as well as remote files. The name of a file does not give its location.
- Concurrency transparency; all clients have the same view of the state of the file system. This means that if one process is modifying a file, any other processes on the same system or remote systems that are accessing the files will see the modifications in a coherent manner.
- Failure transparency; the client and client programs should operate correctly after a server failure.
- Heterogeneity; file service should be provided across different hardware and operating system platforms.
- Scalability; the file system should work well in small environments (1 machine, a dozen machines) and also scale gracefully to huge ones (hundreds through tens of thousands of systems).
- Replication transparency; to support scalability, we may wish to replicate files across multiple servers. Clients should be unaware of this.
- Migration transparency; files should be able to move around without the client's knowledge.
The Incompatible Timesharing System used virtual devices for transparent inter-machine filesystem access in the 1960s. More file servers were developed in the 1970s. In 1976 Digital Equipment Corporation created the File Access Listener (FAL), an implementation of the Data Access Protocol as part of DECnet Phase II which became the first widely used network file system. In 1985 Sun Microsystems created the file system called "Network File System" (NFS) which became the first widely used Internet Protocol based network file system. Other notable network file systems are Andrew File System (AFS), Apple Filing Protocol (AFP), NetWare Core Protocol (NCP), and Server Message Block (SMB) which is also known as Common Internet File System (CIFS).
- GFS (Google Inc.)
- HDFS (Apache Software Foundation)
- Ceph (Inktank, Red Hat)
- MooseFS (Core Technology / Gemius)
- Windows Distributed File System (DFS) (Microsoft)
- FhGFS (Fraunhofer)
- GlusterFS (Red Hat)
Network attached storage
Network attached storage (NAS) provides both storage and a file system, like a shared disk file system on top of a storage area network (SAN). NAS typically uses file-based protocols (as opposed to block-based protocols a SAN would use) such as NFS (popular on UNIX systems), SMB/CIFS (Server Message Block/Common Internet File System) (used with MS Windows systems), AFP (used with Apple Macintosh computers), or NCP (used with OES and Novell NetWare).
Avoiding single point of failure
The failure of disk hardware or a given storage node in a cluster can create a single point of failure that can result in data loss or unavailability. Fault tolerance and high availability can be provided through data replication of one sort or another, so that data remains intact and available despite the failure of any single piece of equipment. For examples, see the lists of distributed fault-tolerant file systems and distributed parallel fault-tolerant file systems.
A common performance measurement of a clustered file system is the amount of time needed to satisfy service requests. In conventional systems, this time consists of a disk-access time and a small amount of CPU-processing time. But in a clustered file system, a remote access has additional overhead due to the distributed structure. This includes the time to deliver the request to a server, the time to deliver the response to the client, and for each direction, a CPU overhead of running the communication protocol software.
Concurrency control becomes an issue when more than one person or client is accessing the same file or block and want to update it. Hence updates to the file from one client should not interfere with access and updates from other clients. This problem is more complex with file systems due to concurrent overlapping writes, where different writers write to overlapping regions of the file concurrently. This problem is usually handled by concurrency control or locking which may either be built into the file system or provided by an add-on protocol.
IBM mainframes in the 1970s could share physical disks and file systems if each machine had its own channel connection to the drives' control units. In the 1980s, Digital Equipment Corporation's TOPS-20 and VAX/VMS clusters included shared disk filesystems.
- Silberschatz, Galvin (1994). Operating System concepts, chapter 17 Distributed file systems. Addison-Wesley Publishing Company. ISBN 0-201-59292-4.
- Arpaci-Dusseau, Remzi H.; Arpaci-Dusseau, Andrea C. (2014), Sun's Network File System, Arpaci-Dusseau Books
- Pessach, Yaniv (2013). Distributed Storage: Concepts, Algorithms, and Implementations. ISBN 978-1482561043.
- A Taxonomy of Distributed Storage Systems
- A Taxonomy and Survey on Distributed File Systems
- A survey of distributed file systems
- The Evolution of File Systems