Device file

From Wikipedia, the free encyclopedia
  (Redirected from Makedev)
Jump to: navigation, search

In Unix-like operating systems, a device or special file is an interface for a device driver that appears in a file system as if it were an ordinary file. There are also special files in MS-DOS and Microsoft Windows. They allow software to interact with a device driver using standard input/output system calls, which simplifies many tasks and unifies user-space I/O mechanisms.

Device files often provide simple interfaces to peripheral devices, such as printers and serial ports. But they can also be used to access specific resources on those devices, such as disk partitions. Finally, device files are useful for accessing system resources that have no connection with any actual device such as data sinks and random number generators.

MS-DOS borrowed the concept of special files from Unix, but renamed them devices.[1] Because early versions of MS-DOS did not support a directory hierarchy, devices were distinguished from regular files by making their names reserved words. This means that certain file names were reserved for devices, and should not be used to name new files or directories.[2] The reserved names themselves were chosen to be compatible with "special files" handling of PIP command in CP/M. There were two kinds of devices in MS-DOS: Block Devices (used for disk drives) and Character Devices (generally all other devices, including COM and PRN devices).[3] PIPE, MAILSLOT, and MUP are other standard Windows devices.[4]

There are two general kinds of device files in Unix-like operating systems, known as character special files and block special files. The difference between them lies in how data written to them and read from them is processed by the operating system and hardware. These together can be called device special files in contrast to named pipes, which are not connected to a device but are not ordinary files either.

Implementation[edit]

Device nodes correspond to resources that an operating-system kernel has already allocated. Unix identifies those resources by a major number and a minor number[5] (e.g. where the major and minor number of /dev/urandom is 1 and 9 respectively[6] which may be ascertained using stat /dev/urandom, see mknod), both stored as part of the structure of a node. The assignment of these numbers occurs uniquely in different operating systems and on different computer platforms. Generally, the major number identifies the device driver and the minor number identifies a particular device (possibly out of many) that the driver controls:[7] in this case, the system may pass the minor number to a driver. However, in the presence of dynamic number allocation, this may not be the case (e.g. on FreeBSD 5 and up).

As with other special file types, the computer system accesses device nodes using standard system calls and treats them like regular computer files. Two standard types of device files exist; unfortunately their names are, for historical reasons, rather counter-intuitive, and explanations of the difference between the two are often incorrect as a result.

Character devices[edit]

Character special files or character devices provide unbuffered, direct access to the hardware device. They do not necessarily, contrary to popular belief, allow you to read or write single characters at a time; that is up to the device in question. The character device for a hard disk, for example, will normally require that all reads and writes are aligned to block boundaries and most certainly will not let you read a single byte.

Block devices[edit]

Block special files or block devices provide buffered access to the hardware, such that “the hardware characteristics of the device are not visible.”[8] Unlike character devices, block devices will always allow you to read or write any sized block you wish (including single characters/bytes) and are not subject to alignment restrictions. The downside is that because block devices are buffered, you do not know how long it will take before a write is pushed to the actual device itself; additionally, if the same hardware exposes both character and block devices, there is a risk of data corruption due to the clients using the character device being unaware of changes made in the buffers of the block device.

Direct access to block devices is considered dangerous due to caching in the kernel. This has resulted in operating systems such as FreeBSD dropping support for block devices altogether.[9]

Pseudo-devices[edit]

Device nodes on Unix-like systems do not necessarily have to correspond to physical devices. Nodes that lack this correspondence form the group of pseudo-devices. They provide various functions handled by the operating system. Some of the most commonly used (character-based) pseudo-devices include:

  • /dev/null – accepts and discards all input; produces no output
  • /dev/zero – accepts and discards all input; produces a continuous stream of NUL (zero value) bytes
  • /dev/full – Linux-specific; produces a continuous stream of NUL (zero value) bytes when read, and returns a "disk full" message when written to
  • /dev/random and /dev/urandom – they produce a variable-length stream of pseudo-random numbers.

Node creation[edit]

Nodes are created by the mknod system call. The command-line program for creating nodes is also called mknod. Nodes can be moved or deleted by the usual filesystem system calls (rename, unlink) and commands (mv, rm). When passed the option -R or -a while copying a device node, the cp -l command creates a new device node with the same attributes of the original.

Some Unix versions include a script named makedev or MAKEDEV to create all necessary devices in the directory /dev. It only makes sense on systems whose devices are statically assigned major numbers (e.g. by means of hardcoding it in their kernel module).

Linux naming conventions[edit]

The following prefixes have come into common use in Linux-based systems, to identify the type of a device driver interface in the /dev hierarchy:

  • fb: frame buffer
  • fd: (platform) floppy disks, though this same abbreviation is also commonly used to refer to file descriptor
  • hd: (“classic”) IDE driver (previously used for ATA hard disk drive, ATAPI optical disc drives, etc.)
    • hda: the master device on the first ATA channel (usually identified by major number 3 and minor number 0)
    • hdb: the slave device on the first ATA channel
    • hdc: the master device on the second ATA channel
      • hdc1: first partition on this disk (example)
      • hdc5: first logical drive in the extended partition (example)
    • hdd: the slave device on the second ATA channel
  • lp: line printers (compare lp)
  • parport, pp: parallel ports
  • pt: pseudo-terminals (virtual terminals)
  • SCSI driver, also used by libATA (modern PATA/SATA driver), USB, IEEE 1394, etc.
    • sd: mass-storage driver
      • sda: first registered device
        • sda4: last partition on this disk (example)
        • sda6: second logical drive in the extended partition (example)
      • sdb, sdc, etc.: second, third, etc. registered devices
    • ses: Enclosure driver
    • sg: generic SCSI layer
    • sr: “ROM” driver (data-oriented optical disc drives; scd is just a secondary alias)
    • st: magnetic tape driver
  • tty: terminals
    • ttyS: (platform) serial port driver
    • ttyUSB: USB serial converters, modems, etc.

The canonical list of these prefixes can be found in the Linux Device List, the official registry of allocated device numbers and /dev directory nodes for the Linux operating system.[10]

For most devices, this prefix is followed by a number uniquely identifying the particular device. For hard drives, a letter is used to identify devices and is followed by a number to identify partitions. Thus a file system may "know" an area on a disk as /dev/sda3, for example, or "see" a networked terminal session as associated with /dev/pts/14.

On disks using the typical PC master boot record, the device numbers of primary and the optional extended partition are numbered 1 through 4, while the indexes of any logical partitions are 5 and onwards, regardless of the layout of the former partitions (their parent extended partition does not need to be the fourth partition on the disk, nor do all four primary partitions have to exist).

Device names are usually not portable between different Unix-like system variants, for example, on some BSD systems, the IDE devices are named /dev/wd0, /dev/wd1, etc.

devfs[edit]

devfs is a specific implementation of a device file system on Unix-like operating systems, used for presenting device files. The underlying mechanism of implementation may vary, depending on the OS.

Maintaining these special files on a physically implemented file system (i.e. harddrive) is inconvenient, and as it needs kernel assistance anyway, the idea arose of a special-purpose logical file system that is not physically stored.

Also defining when devices are ready to appear is not entirely trivial. The 'devfs' approach is for the device driver to request creation and deletion of 'devfs' entries related to the devices it enables and disables.

Implementations[edit]

Operating System Filesystem or managing software Standard mount point Author Notes
Linux 2.3.46pre5–2.6.17 devfsd /dev Richard Gooch Implemented fully in the kernel. Obsolete – users are encouraged to migrate to udev.
Linux 2.5– udev on any fs, but usually tmpfs /dev Greg Kroah-Hartman, Kay Sievers and Dan Stekloff Implemented largely in user space, device information is gathered from sysfs. Device files can be stored on a conventional general-purpose file system, or in a memory file system (tmpfs).
Linux 2.6.32– devtmpfs with or without udev /dev Kay Sievers, Jan Blunck, Greg Kroah-Hartman A hybrid kernel/userspace approach of a device filesystem to provide nodes before udev runs for the first time[11]
Solaris /dev Sun Microsystems
FreeBSD 2.0– devfs /dev Poul-Henning Kamp Implemented fully in the kernel.
DragonFly BSD 2.3.2– devfs /dev Alex Hornung Implemented fully in the kernel.
Mac OS X devfs /dev Apple Inc. Implemented fully in the kernel.
HP-UX B.11.31 devfs /dev HP Implemented fully in the kernel.
Plan 9 # Bell Labs Implemented in the kernel.
MS-DOS, PC DOS, DR-DOS FAT \DEV (and /DEV) various As implemented in the kernel, character devices appear in the virtual \DEV directory and any disk directory. Under MS-DOS/PC DOS 2.x, the CONFIG.SYS AVAILDEV=FALSE directive can be used to force devices to exist only in \DEV.
Windows 9x \\devices\ Microsoft

DOS[edit]

A device file is a reserved keyword used in DOS and DOS–based systems to allow access to certain ports and devices.

DOS uses device files for accessing printers and ports. Most versions of Windows also contain this support, which can cause confusion when trying to make files and folders of certain names, as they cannot have these names.[12] Versions 2.x of MS-DOS provide the AVAILDEV CONFIG.SYS parameter that, if set to FALSE, makes these special names only active if prefixed with \DEV\, thus allowing ordinary files to be created with these names.[13]

Device keyword[12] Use as input Use as output
CON Receives typed data until ^Z (Ctrl-Z) is pressed. Prints data to the console.
PRN N/A Prints text to the printer, usually redirected to LPT1 or LST.
AUX Reads data from an auxiliary device, usually a serial port. Sends data to an auxiliary device, usually the first serial port COM1.
NUL Returns null or no data. Discards received data.
CLOCK$ (still named CLOCK in some versions of MS-DOS 2.11[14]) N/A N/A
KEYBD$ (only in European MS-DOS) ? ?
KBD$ (only in OS/2) ? ?
SCREEN$ (only in European MS-DOS and OS/2) ? ?
POINTER$ (only in OS/2) ? ?
$IDLE$ (only in DR-DOS (since 5.0) and Multiuser DOS (since Concurrent DOS 386) families) N/A N/A
CONFIG$ (only in MS-DOS 7.0 and higher) N/A N/A
LST (only in 86-DOS and DOS 1.x) Returns no data. Sends data to the line printer.
LPT1, LPT2, LPT3, and sometimes LPT4 (in DR-DOS 7.02 and higher and some versions of Multiuser DOS) N/A Sends data to the selected parallel port.
COM1, COM2, COM3, COM4 Reads data from the selected serial port. Sends data to the selected serial port.

Using shell redirection and pipes, data can be sent to or received from a device. For example, typing TYPE c:\data.txt > PRN will send the file c:\data.txt to the printer.

See also[edit]

References[edit]

  1. ^ "Windows for Workgroups: How VSHARE.386 Manages File Sharing". Support.microsoft.com. 1999-09-22. Retrieved 2014-01-22. 
  2. ^ "Avoid Creating Macintosh Filenames that are NT Device Names". Support.microsoft.com. 2006-11-01. Retrieved 2014-01-22. 
  3. ^ "device attributes". Stanislavs.org. Retrieved 2014-01-22. 
  4. ^ "REG: CurrentControlSet Entries PART 2: SessionManager". Support.microsoft.com. 2006-11-01. Retrieved 2014-01-22. 
  5. ^ Brian W. Kernighan, Rob Pike. "The UNIX Programming Environment". p. 66. 
  6. ^ urandom(4) – Linux Special Files Manual
  7. ^ Neil Brown (October 27, 2010). "Ghosts of Unix Past: a historical search for design patterns". LWN.net. Retrieved 30 March 2014. 
  8. ^ "IEEE Std 1003.1, 2013 Edition". Retrieved 24 April 2014. 
  9. ^ "FreeBSD Architecture Handbook". Retrieved 7 March 2013. 
  10. ^ Linux Assigned Names and Numbers Authority (2009-04-06). "Linux allocated devices (2.6+ version)". Linux kernel (Documentation/devices.txt). Retrieved 2013-06-08. 
  11. ^ "Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev". LWN. Retrieved 2009-08-10. 
  12. ^ a b "MS-DOS Device Driver Names Cannot be Used as File Names". Microsoft. 2003-05-12. Retrieved 2008-05-01. 
  13. ^ "Undocumented Commands". 4dos.info. Kevtronics. 2002-04-12. Retrieved 2014-05-16. 
  14. ^ Paterson, Tim; Microsoft (2013-12-19) [1983]. "Microsoft DOS V1.1 and V2.0: /msdos/v20source/SKELIO.TXT, /msdos/v20source/HRDDRV.ASM". Computer History Museum, Microsoft. Retrieved 2014-03-25.  (Note: While the publishers claim this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)

Further reading[edit]