Mercedes-Benz 4G-Tronic transmission

Mercedes-Benz W4A 028 · W4A 040 · W4A 020 · W5A 030
Overview
Manufacturer	Daimler AG
Production	1979–1996
Body and chassis
Class	4-speed longitudinal automatic transmission
Chronology
Predecessor	Mercedes-Benz first series automatic transmission
Successor	5G-Tronic (Type 722.6)

The Mercedes-Benz 4G-Tronic transmission was produced from 1979 to 1996 in W4A 028, W4A 040 (both type 722.3), W4A 020 (type 722.4), and W5A 030 (type 722.5) variants.

Abstract

The 4G-Tronic transmission is a hydraulically operated four speed automatic without lock-up that replaced the similarly designed W3A 040, W3B 050, and W4B 025 family of automatic transmissions with the introduction of the W126 S-Class in 1979. In some models it is calibrated to move off in second gear to reduce "creeping" and provide a smoother ride, selecting 1st only if the selector is in "2" or in case of abrupt acceleration. Other calibrations have the transmission rest in 2nd gear and kick down to 1st as soon as the accelerator is touched but before the throttle is opened. In some V8 installations a small control unit activates the kick down solenoid when the brake pedal is released so that the car moves off in 1st gear. Other attributes of this transmission include a 2-3 shift delay when the engine is cold in order to speed up catalyst warm-up. 4th gear is a 1:1 ratio. Controls are all mechanical and pneumatic, except for the kickdown solenoid and 2-3 upshift delay solenoid on some models.

In some markets a W-S (Winter - Standard / Sport) switch was provided on the shifter. Activating S mode changes a linkage which effectively shortens the throttle pressure bowden cable. This causes later, higher RPM shifts and on some models a move off in 1st gear instead of 2nd. On V8 models a B (Brake) range is available on the shifter. This activates the kickdown solenoid, forcing the transmission to shift down to 1st sooner for increased engine braking. A hydraulically activated piston prevents shifting into Reverse when the car is moving forward.

Models from 1990 and earlier allow for push starting the engine. They are fitted with a secondary fluid pump, driven by the transmission output shaft. When the vehicle is rolling at 20 mph shifting from Neutral to the 2 range will couple power to the engine. The secondary pump and thus the push starting facility was eliminated for the 1991 model year.

The W4A 040 and the W4A 020 were used until mid-1996. The W4A 028 variant was used for off-road applications (RWD and 4X4). The W5A 030 is basically the same transmission with an additional electrically controlled 5th gear overdrive section attached to the main body in a separate housing; it was available as an extra charge option. All 4G-Tronics were succeeded by the more modern and economic 5G-Tronic (Type 722.6) transmission that features an integrated 5th gear overdrive ratio, torque converter lock-up and fully electronic control.

It is considered by enthusiasts to be one of the most reliable transmissions ever built by Mercedes-Benz with some examples exceeding 300,000 miles of service.

Specifications

Basic concept

For this W4A-models 4 forward gears using 8 main components show economic equivalence with the direct predecessor. 5 forward gears out of 11 main components and the need of two housings and two different controls turn out the W5A 030 as the least economically designed automatic transmission ever manufactured for passenger cars. Obviously a transition solution: the direct successor, launched in 1996, requires 9 main components, one housing and one control.

Gear ratios

Gear Teeth and Ratios		Planetary Gearset: Teeth				Count	Total	Avg.
		Ravigneaux		Simple
Model Type	Version First Delivery	Sun 1.1 Ring 1.1	Sun 1.2 Ring 1.2	Sun 2 Ring 2	Sun 3 Ring 3	Brakes Clutches	Ratio Span	Gear Step
Gear		1	2	3	4	5		R
W4A 040 722.3	392 Nm · 289 lb·ft 1979	34 50	50 78	34 78		3 2	3.6759	1.5433
Ratio		3.6759	2.4123	1.4359	1.0000			- 5.1388
W4A 020 722.4	196 Nm · 145 lb·ft 1982	26 42	42 78	38 78		3 2	4.2491	1.6197
Ratio		4.2491	2.4078	1.4872	1.0000			- 5.6692
W4A 040 II 722.3	392 Nm · 289 lb·ft 1985	26 46	46 78	34 78		3 2	3.8707	1.5701
Ratio		3.8707	2.2475	1.4359	1.0000			- 5.5857
W4A 028 722.3	274 Nm · 202 lb·ft 1990	26 46	46 78	34 78		3 2	3.8707	1.5701
Ratio		3.8707	2.2475	1.4359	1.0000			- 5.5857
W5A 030 722.5	294 Nm · 217 lb·ft 1990	26 46	46 78	34 78	26 78	4 3	5.1609	1.5072
Ratio		3.8707	2.2475	1.4359	1.0000	0.7500		- 5.5857

Applications

The 4G-Tronic has been used in many Mercedes-Benz cars.

W4A 028 (Type 722.3)

• 1990-1995 G-Class 463.

W4A 040 I+II (Type 722.3)

• 1981-1989 R107 and C107
• 1989-1996 R129

1981-1985 W123
Chassis code	Car model	Engine code	Transmission code	Notes
123.026	250	123.920, 123.921	722.308
123.086	250T
123.028	250 Lang
123.033	280E	110.984, 110.988	722.300, 722.309
123.093	280TE		722.309
123.053	280CE		722.300, 722.309
123.133	300D Turbo	617.952	722.315	Only for USA 1982-1985
123.153	300CD Turbo
123.193	300TD Turbo		722.303 (81-85), 722.315 (82-85)	Only for USA 1981-1985

• 1985-1996 W124
• 1979-1991 W126
• 1991-1996 W140
• 1985-1993 W201
• 1995-1996 W210

W4A 020 (Type 722.4)

1982-1985 W123
Chassis code	Car model	Engine code	Transmission code	Notes
123.220	200	102.920, 102.939	722.406
123.280	200T
123.223	230E	102.980	722.401
123.283	230TE
123.243	230CE
123.120	200D	615.940	722.407
123.123	240D	616.912	722.404
123.183	240TD
123.125	240D Lang
123.130	300D	617.912	722.405
123.190	300TD
123.132	300D Lang
123.133	300D Turbo	617.952	722.416	Only for California 1985
123.153	300CD Turbo
123.193	300TD Turbo

• 1985-1996 W124
• 1982-1993 W201
• 1993-1996 W202
• 1995-1996 W210

W5A 030 (Type 722.5)

• 1990-1996 W124
• 1991-1996 W140
• 1995-1996 W210
• 1990-1996 R129

See also

• List of Daimler AG transmissions

External links

• Mercedes 722.3 & 722.4 Technical Overview