Metrication in the United Kingdom
Metrication in the United Kingdom remains partial. Most of government, industry and commerce use metric units, but imperial units are officially used to specify journey distances, vehicle speeds and the sizes of returnable milk containers, beer and cider glasses. Imperial units are also often used informally to describe body measurements and vehicle fuel economy. At school, the use of metric units is the norm, though pupils are taught rough metric equivalents of those imperial units still in daily use.
Adopting the metric system had been discussed in the Parliament as early as 1818 and some industries and even some government agencies had metricated, or were in the process of metricating by the mid 1960s. However, a formal government policy to support metrication was not agreed until 1965. This policy, initiated in response to requests from industry, was to support voluntary metrication, with costs picked up where they fell. In 1969 the government created the Metrication Board as a Quango to promote and coordinate metrication. In 1978, after some carpet retailers reverted to pricing by the square yard rather than the square metre, government policy shifted, and they started issuing orders making metrication mandatory in certain sectors. In 1980 government policy shifted again to prefer voluntary metrication, and the Metrication Board was abolished. By the time the Metrication Board was wound up, all the economic sectors that fell within its remit except road signage and parts of the retail trade sector had metricated.
The treaty of accession to the European Economic Community (EEC), which the United Kingdom joined in 1973, obllged the United Kingdom to, incorporate into domestic law all EEC directives, including the use of a prescribed SI-based set of units for many purposes within five years. By 1980 most pre-packaged goods were sold using the prescribed units. Mandatory use of prescribed units for retail sales took effect in 1995 for packaged goods and in 2000 for goods sold loose by weight. The use of "supplementary indications" or alternative units (generally the traditional imperial units formerly used) was originally to have been permitted for only a limited period. However, that period had to be extended a number of times due to public resistance, until in 2009 the requirement to ultimately cease use of traditional units alongside metric units was finally removed.
British scientists, philosophers and engineers have been at the forefront of the development of metrication – in 1668 John Wilkins first proposed a coherent system of units of measure, in 1861 a committee of the British Association for Advancement of Science (BAAS), including William Thomson (later Lord Kelvin), James Clerk Maxwell and Joule among its members, defined various electrical units in terms of metric rather than imperial units, and in the 1870s Johnson, Matthey & Co manufactured the international prototype metre and kilogram. However, the British Government has been lukewarm in its support of the metric system and, in the words of the Daily Telegraph, the British public lacks cultural empathy with the system.
- 1 History
- 2 1965 onwards
- 3 Regulatory aspects
- 4 Assessment of the British metrication programme
- 5 Current usage
- 6 Advocacy groups
- 7 See also
- 8 Notes
- 9 References
- 10 Bibliography
When James VI of Scotland inherited the English throne in 1603, England and Scotland had different systems of measure. Superficially the English and the Scots units of measure were similar – many had the same names – but there were differences in their sizes: in particular the Scots pint and gallon were more than twice the size of their English counterparts. In 1707, under the Act of Union, the Parliaments of England and Scotland were merged and the English units of measurement became the standard for the whole new Kingdom of Great Britain. However, the practical effect of this was that both systems were used in Scotland, and the Scottish measures remained in common use until the Weights and Measures Act 1824 outlawed them.
This period marked the Age of Enlightenment, when people started using the power of reason to reform society and advance knowledge. Britons played their role in the realm of measurement, laying down practical and philosophical foundations for a decimal system of measurement which were ultimately to provide the building blocks of the metric system.
One of the earliest decimal measuring devices, developed in 1620 by the English clergyman and mathematician Edmund Gunter, introduced two new units of measure— the chain and the link—and a new measuring device: Gunter's chain. Gunter's chain was one chain (one tenth of a furlong) in length and consisted of 100 links, making each link 0.001 furlongs. The decimal nature of these units and of the device made it easy to calculate the area of a rectangle of land in acres and decimal fractions of an acre.
In 1670, John Wilkins, the first president of the Royal Society, published his proposal for a decimal system of measure, in his work An Essay towards a Real Character and a Philosophical Language. His proposal envisaged a system of units in which the base unit of length was defined by a pendulum that had a period of one second, and the base unit of mass was defined by a cube of rainwater having sides equal to the base unit of length. He recycled the existing names of units of measure, so that there were 10 lines in an inch, 10 inches in a foot, and so on. A century later, his concept of defining unit mass in terms of a cube of water with edges of unit length was one of the fundamental concepts of the metric system.
Having difficulties in communicating with German scientists, the British inventor James Watt, in 1783, called for the creation of a global decimal measurement system. A letter of invitation, in 1790, from the French National Assembly to the British Parliament to help create such a system using the length of a pendulum (as proposed by Wilkins) as the base unit of length received the support of the British Parliament, championed by John Riggs Miller, but when the French overthrew their monarchy and decided to use the meridional definition of the metre as their base unit, Britain withdrew support. The French continued alone and created the foundations of what is now called the Système International d'Unités and is the measurement system for most of the world.
In 1799, the French created, and started to use, a new system with the metre and the kilogram as the units of length and mass. As use of this new system, originally called the "Decimal System", spread through Europe, there were some calls in the United Kingdom for decimalisation. The issue of decimalisation of measurement was intertwined in the United Kingdom with decimalisation of currency. The idea was first discussed by a Royal Commission that reported in 1818, and again in Parliament by Sir John Wrottesley in 1824. Another Royal Commission was set up 1838 by Chancellor of the Exchequer Thomas Spring Rice and it reported in 1841 that decimal coinage was required first. A third commission in 1853 advocated decimal coinage in the form £1 : 10 florins : 100 cents: 1000 mils. The first florins (one tenth of a pound sterling) were struck in 1849 as silver coins weighing 11.3 grams (0.40 ounces) and having a diameter of 28 millimetres (1.1 inches).
An early supporter of the Decimal Association was the mathematician Augustus de Morgan whose articles supporting the metric system had been published in the Penny Cyclopeadia (1833) and The Companion to the Almanac (1841). A few days later Wrottesley met with Gladstone, then Chancellor of the Exchequer, but was unable to win him over to the idea. The inherent problems associated with handling multiple currencies and systems of units encountered in the Great Exhibition of 1851 triggered calls for a standardisation of units across Europe with the metric system being suggested as the natural choice. In 1854, de Morgan was influential in setting up the "Decimal Association" to lobby for decimalisation of both measurement and coinage. In 1862, the Select Committee on Weights and Measures favoured the introduction of decimalisation to accompany the introduction of metric weights and measures. A further Royal Commission "on the question of the introduction of metric system of weights and measures" also reported in 1869
In 1863, a bill which would have mandated the use of the metric system throughout the British Empire, and which had passed its first and second readings in the House of Commons, was rejected at its Commons Committee stage as impractical, and so did not pass into law law. The following year, after pressure from the astronomers George Airy and Sir John Herschel, the bill was watered down to merely legalise the use of the metric system in contracts. It was presented and passed as a Private Member's Bill. However, ambiguous wording in the 1864 Act meant that traders who possessed metric weights and measures were still liable to arrest under Act 5 and 6 William IV c63.
While the politicians were discussing whether or not to adopt the metric system, British scientists were in the forefront in developing the system. In 1845, a paper by James Prescott Joule proved the equivalence of mechanical and thermal energy, a concept that is vital to the metric system – in SI, power is measured in watts and energy in joules regardless of whether it is mechanical, electrical or thermal.
In 1861, a committee of the British Association for Advancement of Science (BAAS) including William Thomson (later Lord Kelvin), James Clerk Maxwell and Joule among its members was tasked with investigating the "Standards of Electrical Resistance". In their first report (1862), they laid the ground rules for their work – the metric system was to be used and measures of electrical energy must have the same units as measures of mechanical energy. In the second report (1863), they introduced the concept of a coherent system of units whereby units of length, mass and time were identified as "fundamental units" (now known as base units). All other units of measure could be derived (hence derived units) from these base units.
In 1873, another committee of the BAAS that also counted Maxwell and Thomson among its members and was tasked with "the Selection and Nomenclature of Dynamical and Electrical Units". They recommended the CGS (centimetre-gram-second) system of units. The committee also recommended the names "dyne" and "erg" for the CGS units of force and energy. The CGS system became the basis for scientific work for the next seventy years.
In 1875, a British delegation was one of twenty national delegations to a convention in Paris that resulted in seventeen of the nations signing the Metre Convention on 20 May 1875, and the establishment of three bodies, the CGPM, CIPM and BIPM, that were charged with overseeing weights and measures on behalf of the international community. The United Kingdom was one of the countries that declined to sign the convention. In 1882 the British firm Johnson, Matthey & Co secured an agreement with the French government to supply 30 standard metres and 40 standard kilograms. Two years later the United Kingdom signed the treaty and the following year it was found that the standard yard which had been in use since 1855 had been shrinking at the rate of one part per million every twenty years. In 1889, one of the standard metres and one of the standard kilograms that had been cast by Johnson, Matthey & Co were selected at random as the reference standard and the other standards, having been cross-correlated with each other, were distributed to the signatory nations of the treaty.
In 1896, Parliament passed the Weights and Measures (Metric System) Act, legalising metric units for all purposes but not making them compulsory.
The situation was clarified in 1897 following another Select Committee which also recommended that metrication become compulsory by 1899. In 1902, an Empire conference decided that metrication should be compulsory across the British Empire. In 1904, scientist Lord Kelvin led a campaign for metrication and collected 8 million signatures of British subjects. On the opposition side, 1904 saw the establishment of the British Weights and Measures Association for "the purpose of defending and, where practicable, improving the present system of weights and measures". At this time 45% of British exports were to metricated countries. Parliament voted to set up a Select Committee on the matter.
This Select Committee reported in 1907 and a bill was drafted proposing compulsory metrication by 1910, including decimalisation of coinage.
The matter was dropped in the face of wars and depression, and would not be again raised until the White Paper of 1951, the result of the Hodgson Committee Report of 1949 which unanimously recommended compulsory metrication and currency decimalisation within ten years. The report said "The real problem facing Great Britain is not whether to adhere either to the Imperial or to the metric system, but to maintain two legal systems or to abolish the Imperial." The report also recommended that any change should be implemented in concert with the Commonwealth (former Empire) and the USA, that the United Kingdom adopt a decimal currency and that the United Kingdom and United States harmonise their respective definitions of the yard using the metre as a reference. The Hodgson Report was originally rejected by British industry, but in 1959 the United Kingdom and United States redefined their respective yards to be 0.9144 m exactly.
The introduction of the metric system was a topic at the Fifth Commonwealth Standards Conference that was held in Sydney in 1962. The following year a poll by the British Standards Institute (BSI) revealed that the majority of its members favoured a transition to the metric system and two years later (1965), after taking a poll of its members, the Confederation of British Industry informed the government that they favoured the adoption of the metric system, though some sectors emphasised the need for a voluntary system of adoption.
In 1966 the Government announced the adoption in 1971 of a decimal currency.
In 1965, the then Federation of British Industry informed the British Government that its members favoured the adoption of the metric system. The Board of Trade, on behalf of the Government, agreed to support a ten-year metrication programme There would be minimal legislation as the programme was to be voluntary and costs were to be borne where they fell.
Work on adapting specifications started almost as soon as the government first gave its approval in 1965. The BSI took the lead in coordinating the efforts of industry, and where appropriate working with the International Organisation for Standardisation (ISO), CEE, CEN and CENELEC while the Royal Society liaised with professional societies, schools and the like. Initially the BSI targeted 1200 basic standards which were converted to metric units by 1970. Most of the remaining 4000 standards were converted in the ensuing five years.
There were three principal ways in which metrication was implemented:
- Hard metrication which resulted in new products based on rational metric units – for example A4 paper[Note 1] replaced both foolscap and quarto paper and in rugby union 5, 10 and 22 m lines replaced the 5, 10 and 25 yd lines respectively. In many cases the new British Standards were based on existing foreign or international standards, for example ISO 216 (based on the German DIN standard DIN 476) which defined the "A series" of paper.
- Soft metrication where existing standards were rewritten using metric units, but the underlying products remained unchanged: one typical example is that the standard rail gauge was changed from 4 ft 81⁄2 in to 1435 mm, a reduction of 0.1 mm, but well within the allowable tolerance of 5 mm. This approach was used where any radical changes would have been impractical.
- Revision of measurement techniques were introduced in cases where the concepts behind the existing standard or practice were found to be archaic. One such revision was to define the strength of alcoholic drink as a percentage alcohol by volume rather than, in the case of whiskey, in "degrees proof" (described by Lord Brown as being "based on a test that involves the burning of a given quantity of gunpowder").
The Metrication Board
In July 1968, following the publication of a report from the Standing Joint Committee on Metrication, the government announced that an advisory metrication board would be set up as soon as possible, to oversee the metrication process, with a target completion date of the end of 1975. The report favoured the board being made up of part-time members drawn from commerce and industry, with government, education and consumer interests also being represented. In December 1968 the government announced the set up of the Metrication Board to coordinate the metrication programme, with Lord Ritchie-Calder being appointed as chairman. By this time much of the groundwork, especially rewriting of many British Standards using metric units, had been done and many of the industries that stood to benefit from metrication had already metricated, or had a metrication programme in progress.
The general election of 18 June 1970 resulted in a change of government and four months later, on 27 October 1970, following an anti-metrication motion being tabled calling on the new government not to continue with the previous government's metrication commitments, the government announced that a White Paper would be produced to examine the cost, savings, advantages and disadvantages of a change to the metric system. During the debate when the announcement was made, Conservative MPs complained that metrication was being introduced by stealth
The White Paper was published in February 1972, and it set out the case for metrication and refuted the charge of metrication by stealth as metric units had been lawful for most purposes since 1897. It also reported that metrication would be necessary for the UK to join the European Common Market and that as British industry was exporting to all parts of the world they would benefit. It also reiterated the previous government's policy that metrication should be voluntary and hoped metrication would be mostly complete within ten years. The expectation was also expressed that with both the imperial and metric systems coexisting for many years, that consumers would gradually become familiar and comfortable with the metric system.
Shortly after the publication of the White Paper, the Minister of Transport announced postponement of the metrication of speed limits, which had been scheduled for 1973. The rest of the metrication programme continued, with the following completion dates:
- 1970 Electric Cable Makers Confederation, British Aerospace Companies Limited drawing and documentation, London Metal Exchange, flat glass
- 1971 Paper and board, National Coal Board designs, pharmaceuticals
- 1972 Paint industry, steel industry, building regulations
- 1974 Textile and wool transactions, leading clothing manufacturers adopt dual units
- 1975 Retail trade in fabrics and floor coverings, post office tariffs, medical practice
- 1976 Bulk sales of petroleum, agriculture and horticulture
- 1977 Livestock auctions
- 1978 Solid fuel retailing, cheese wholesaling, bread, London Commodity Market
Yet the target of completion by 1975 "in concert with the Commonwealth" was not achieved; Australia, New Zealand and South Africa all completed their metrication processes by 1980.
There was no single approach to the metrication of the engineering industry: in some areas soft metrication was applied and in others hard metrication. In certain branches metrication was achieved by adopting the equivalent European or international standard, but this was not always possible as certain standards, such as BS 1363 which defined electric plugs were peculiarly British while the petrochemical industry had standardised on API and ANSI standards.
An example of a hard metrication changeover was the threaded fastener industry (nuts and bolts) where 21 "first choice" BSW, BSF and BA series thread in the range 0 BA to 1 inch plus another 20 UNC and UNF fasteners were replaced by just seven metric sizes. This resulted in considerable cost savings, not only due to the reduction in inventories, but also the numbers of taps, dies, tapping and clearance drills that workshops held.
As example of soft conversion was the construction products industry (metricated 1969 and 1972) where certain products continue to be produced to with reference to Imperial trade names but made using metric dimensions in the factory; for example, a 13 mm thick plasterboard is still often called 'half-inch', even though the measurement is rounded to a convenient metric size and so is now only approximately half an inch thick. The construction industry itself (which included civil engineering projects) was one of the leaders in the metrication programme, having drawn up a detailed plan in 1967 and completing the phase-over by the end 1972.
The BSI, after consultations with the engineering industry, had set a target of 75% of the industry being metric by the end of 1975. This target was not reached, one of the principal reasons being that other sectors, especially the retail sector, were lagging in reaching their targets.
Initiation of a national education programme in the schools
In England and Wales, unlike Scotland, education was controlled at county council level rather than at national level. In 1967 the Department for Education alerted all local education authorities to the need to adapt to the metric system. In 1968 all bodies that had an interest in the examination system were invited to contribute to the discussion of both metrication and decimalisation in education. In science subjects, this meant a conversion from the cgs system to SI, in geography from the imperial system to SI while in mathematics it meant discarding the teaching of mixed unit arithmetic, a topic that took up a significant part of the time allocated in primary schools to arithmetic/mathematics and 7% of total time allocated to all subjects.
In Scotland, virtually all examinations set in 1973 onwards used SI, especially those connected with science and engineering. In England, each examination board had its own timetable – the Oxford Delegacy of Local Examinations for example announced a change to SI in 1968 with examinations in science and mathematics using SI by the 1972, Geography in 1973 and Home Economics and various craft subjects being converted by the end of 1976. report. The changes were hampered by a revolution in teaching methods that was taking place at the same time and a lack of coordination at the national level. A report in 1982 noted that children were taught the relationship between decimal counting, decimal money and metric measurements, with time being the only quantity whose units were manipulated in a mixed-unit manner.
The biggest change in education in England since the 1970s was the introduction in 1988 of the National Curriculum, in which SI is the principal system of measurement and calculation. However, pupils are expected to know how to convert between metric and imperial units that are still in everyday use, specifically "pounds, feet, miles, pints and gallons", and conversion between the two systems is given as an example of numerical problems students should be able to solve. The National Curriculum makes no mention of the manipulation of imperial units, and activity that Workman, when writing his book "The Tutorial Arithmetic" in 1902, bemoaned as "...half a year of school life ... entirely wasted for every English boy in learning the arithmetical devices necessary for managing the "weights and measures" previously explained." In 1995, educationalist Jenny Houssart wrote "For years there was a feeling that the metric system was something teachers pretended existed, although inhabitants of the real world knew better." Lord Howe of Aberavon, speaking in the House of Lords, asserted that the United Kingdom's policy came close to recreating "Disraeli's two nations-divided between, on the one hand, a metrically literate elite and, on the other, a rudderless and bewildered majority."
Wholesale, retail and consumer industries
The retail industry proved difficult for the Metrication Board. The sector saw little benefit in metrication – competition was fierce and margins low. The opinions of the trade organisations with which the Metrication Board could negotiate were fragmented.
Many sectors of the industry did however agree to a programme coordinated by the Metrication Board, with metrication of pre-packaged goods being introduced on a commodity by commodity basis. However, in 1977 when a carpet retailing chain reneged on an industry-wide agreement to use metric units (carpeting at £8.36 per square yard being much more appealing to the customer than carpeting at £10.00 per square metre), it became necessary for the first time to use legislation to enforce metrication rather than to rely on a voluntary adoption of the system.
Much of the retail industry was metricated during 1977 and 1978 by means of statutory orders.
By the beginning of 1980, 95% of the "basic shopping basket" of foods were sold in metric quantities, with only a few products not being sold in prescribed metric quantities. The final report of the Metrication Board catalogues dried vegetables, dried fruit, flour and flour products, oat products, cocoa and chocolate powder, margarine, instant coffee, pasta, biscuits, bread, sugar, corn flakes, salt, white fats, dripping and shredded suet as being sold by prescribed metric quantities while no agreement had been reached with the industry regarding jam, marmalade, honey, jelly preserves, syrup, cereal grain and starches.
When the Metrication Board was abolished in 1980, agreement had been reached with the EEC regarding the use of certain imperial measures until the end of 1989, a date that was subsequently extended to 1999. Although by this date most pre-packaged goods were sold in metric quantities, loose goods and goods weighed in front of the customer continued to be sold in imperial quantities. In 1999, when the British Government allowed the derogation for the use imperial units to lapse, all goods (apart from beer, cider and milk in returnable containers) had to be priced in metric units.
The changeover to selling of petrol by the litre rather than by the gallon took place after the Board was wound up. It was prompted by a technical shortcoming of petrol pump design: pumps (which were electro-mechanical) had been designed to be switchable between metric and imperial units, but had no provisions for prices above £1.999 per unit of fuel. Once the price of petrol rose above £1 per gallon, the industry requested that they be permitted to sell fuel by the litre rather than the gallon, enabling them to reduce the unit price by a factor of about 4.5 and so to extend the lives of existing pumps.
In the United Kingdom, draught beer and cider are the only goods that may not be sold in metric units; the only legal measures for these are 1⁄3 pint (190 ml) (rarely encountered), 1⁄2 pint (283 ml) and multiples of the pint. Other alcoholic drinks for consumption on the premises are sold by metric measure: the 1⁄4, 1⁄5 and 1⁄6 gill measures for spirits (whisky, gin, rum and vodka) were replaced by 25 ml and 35 ml measures on 1 January 1995 and since 1995 wine may only be sold in 125 ml, 175 ml or 250 ml glasses. (Prior to 1995, the size of wine glasses was unregulated.)
Before the Hodgson Committee, the metrication process was already in operation. One example was the Ordnance Survey, the national mapping agency for Great Britain, which initiated the Retriangulation of Great Britain in 1936, using metric measures. A metric National Grid was then used as the basis for maps published by the Ordnance Survey from World War II onwards, the War Office maps having had a metric grid since 1920. The Ordnance Survey decided on full metrication in 1964. The best-selling 1 inch to the mile range of maps started being replaced with the 1:50000 range in 1969. The metrication of Admiralty Charts began in 1967 as part of a modernisation programme. As of 2013[update], road and street maps with primary scales in inches per mile were still being produced by the company Geographers' A–Z Street Atlas.
Many other sectors metricated their operations in the late 1960s or early 1970s, invisibly to the general public, though their use of metric units can be seen in the financial pages of the leading newspapers. Such sectors included the principal London commodity markets (apart from the oil industry) the London Metal Exchange, and the various agricultural markets.
The basic features of the British metrication programme as announced in 1966 was a voluntary adoption of the metric programme with the costs being absorbed where they fell. As a result the costs and savings of metrication in the United Kingdom have not been comprehensively determined and studies have tended to focus on specific programmes. The impact of a voluntary programme meant that industry was free to take the most cost-efficient approach, which in many cases has meant installing equipment calibrated in metric units as part of an on-going maintenance cycle rather than as part of a specific metrication programme. Such an approach was taken by the gas industry where all newly installed meters record usage in cubic metres, but many older installations will measure in cubic feet.
A 1970s study by the United Kingdom chemical industry estimated costs at £6m over seven years, or 0.25% of expected capital investment over the change period. Other estimates ranged from 0.04% of a large company's turnover spread over seven years to 2% of a small company's turnover for a single year. Many companies reported recouping their costs within a year as a result of improved production. Some 90% of United Kingdom exports go to metric countries (as only Liberia, Burma and the United States have not adopted the International System of Units), and there are costs to business of maintaining two production lines (one for exports to the US in Imperial, and the other for domestic sales and exports to the rest of the world in metric). These have been estimated at 3% of annual turnover by the Institute of Production Engineers, and at £1.1 billion (1980) per annum by the CBI. Regardless of United Kingdom metrication, goods produced in the United Kingdom for export to the United States would have still been labelled in non-metric units to comply with the US Fair Packaging and Labelling Act.
In 1978 the cost of converting road signs from miles to kilometres in the United Kingdom was estimated to be between £7½ and £8½ million (1978 prices). A 2005 report pointed to the metrication of the United Kingdom's two million road signs as the major cost of completing the United Kingdom's metrication programme. The Department for Transport (DfT) costed the replacement of all of the United Kingdom's road signs in a short space of time at between £565 million and £644 million. In 2008–09, before the outcome of the consultations that led to the EU directive 2009/3/EC was known, the DfT had a contingency of £746 million for the metrication of roads signs. In contrast, the United Kingdom Metrication Association, in a report published in 2006, and using a model based on the Irish road sign metrication programme, estimated the cost of converting road signs to be £80 million, spread over 5 years (or about 0.25% of the annual roads budget).
As of 2014 roads signs still use imperial units.
Traditionally weights and measures legislation in the United Kingdom only applied to trade, but when the United Kingdom joined the European Economic Community, she had to align her legislation with EEC directives that were in place. These directives included EEC directive 71/354/EEC which related to weights and measures and which required the United Kingdom to formally define in law a number of units of measure, hitherto formally undefined in law including those for electric current (ampere), electric potential difference (volt), temperature (degree Celsius and kelvin), pressure (pascal), energy (joule) and power (watt).
Units of measurement
Due to public opposition to metrication (in 1979 46% were opposed to the programme, 31% in favour and 22% indifferent) the programme was stalling during the 1970s, and the United Kingdom government asked the EEC to postpone the deadlines for the introduction of metric units. The result was the repeal of directive 71/354/EEC and the introduction of directive 80/181/EEC. This directive allowed the continued use in the United Kingdom, until the end of 1989 (subsequently extended to 1995), of many imperial units then in use for trade.[Note 2]
As part of the alignment process with directive 80/181/EEC, the Weights and Measures Act 1986 formally removed from the statute book a large number of imperial units of measure that had fallen into disuse as a result of the metrication programme to date.[Note 3]
The directive specifically excluded units of measurement used in international treaties relating to rail traffic, aviation and shipping such as expressing aircraft altitude in feet.
Directive 80/181/EEC should have been transposed into United Kingdom law by 30 June 1981, but this transposition only occurred with the enactment of The Units of Measurement Regulations 1986.
At the end of 1988 the derogation was extended to the end of 1994 and to the end of 1999 for the sale of loose goods. This amendment was transposed into United Kingdom law by the Units of Measurement Regulations 1994 and at the same time regulations were passed prescribing metric quantities by which the last outstanding pre-packaged retail commodities should be sold. As from the beginning of 1995, pre-packed coffee, coffee mixtures and coffee bags had to be sold in the prescribed quantities of 57 grams (2 oz), 75 grams (2.6 oz), 113 grams (4 oz) 125 grams (4.4 oz), 227 grams (8 oz), 250 grams (8.8 oz), 340 grams (12 oz), 454 grams (1 lb), 500 grams (1.1 lb), 680 grams (1.50 lb), 750 grams (1.65 lb) or a multiple of 454 grams (1 lb) or of 500 grams (1.1 lb); and honey, jam and marmalade other than diabetic jam or marmalade, jelly preserves and molasses, syrup and treacle in 57 grams (2 oz), 113 grams (4 oz), 227 grams (8 oz), 340 grams (12 oz), 454 grams (1 lb), 680 grams (1.50 lb) or a multiple of 454 grams (1 lb). Additionally, the number of units of measure to which derogations applied were reduced with effect from 1 October 1995[Note 2] and reduced further with effect from 1 January 2000.[Note 4] A direct result of the changes that were effective from 1 January 2000 was the requirement that most loose goods sold by weight, volume or length (for example potatoes or tomatoes that were sold loose or cheese or meat that was cut or weighed in front of the customer) must be priced and measured using metric units though there are no restrictions on the units that shoppers could use when asking for goods. Prior to this date the legislation or changes of standards resulting in the use of the metric system for specific activities within the United Kingdom had been completed prior to the publication of corresponding EU directive.
Non-metric units, allowed by United Kingdom law for economic, public health, public safety or administrative use from 1 January 2000, are limited to:
- the mile, yard, foot and inch for road traffic signs, distance and speed measurement,
- the imperial pint for the dispensing of draught beer and cider, and for the sale of milk in returnable containers,
- the acre for land registration,[Note 5]
- the troy ounce for transaction in precious metals.
Goods and services sold by a description are not covered by weights and measures legislation; thus, a fence panel sold as "6 foot by 6 foot" is legal, as is a 6 x 4 inch photograph frame, but a pole sold with the price described as "50 pence per linear foot", with no accompanying metric price, would be illegal.
In response to the specific requirements of the United Kingdom and of Ireland, both of which were in the process of converting to the metric system Directive 80/181/EEC incorporated a provision that any unit of measure could be followed by a "supplementary indicator", provided that the supplementary indicator was not the dominant unit and that it was "... expressed in characters no larger than those of the corresponding indication ...". Initially this provision was to have expired in 1989, but it was extended firstly to 1999 and then to 2009. During the 2007 consultations on the revision of the directive, strong representations were made to retain this provision as its removal would impede trade with the United States. When the directive was revised in 2009, the "sunset clause" was removed from the text.
Although the EU directive gives no guidance as to what units may or may not be used as supplementary indicators, British legislation has restricted the unit that may be used in this way for purposes of trade to specified imperial units only.[Note 6]
Furthermore, in the United Kingdom it is still common to see imperial packaging sizes marked with metric units. For example, most jars of jam, packs of sausages and tins of golden syrup are marked 454 g.
Scope of the EU Directive
In its initial form, the scope of directive 80/181/EEC was restricted to "economic, public health, public safety and administrative" purposes only. An outcome of the 2007 consultations was a proposal by the EU Commission to extend the scope of the directive to include "consumer protection" and "environmental issues". This was implemented by removing the phrase limiting the scope of the directive, thereby extending it to all matters that come under the ambit of the Internal Market Chapter of the EU Treaty.
The United Kingdom's legislation of 2009 that implemented these changes made no reference to the extension of the directive's scope.
During the 1990s a series of statutory instruments relating to weighing devices and to the sale of pre-packaged goods were passed to ensure that United Kingdom law on metrology was harmonised with that of her EEC partners. In line with EEC practice, the meaning of weights displayed on pre-packaged goods was changed in 1980 to show the average weight of each item in the batch rather than the guaranteed minimum weight of each individual item. The EU Measuring Instruments Directive (Directive 2004/22/EU) which intends to create a common market for measuring instruments across the 27 countries of the EU came into force on 30 October 2006 with a ten-year transition period.
The EU non-automatic weighing instrument directive (directive 2009/23/EEC), which came into force in 2009 codified existing regulations regarding the harmonisation of non-automatic weighing devices used for trade, medical purposes or in the preparation of evidence to be heard in court. The directive identified four classes of weighting device ranging from Class I (having a minimum accuracy of 1 part in 50,000) to class IIII (having a minimum accuracy of 1 part in 100). Devices that fall within the scope of the directive are required to be recalibrated at regular intervals and to have an output showing SI units, except for those used for weighing precious metals or stones. Secondary indications may be shown, provided that they cannot be mistaken for primary indications.
The impact of this directive in the United Kingdom is that most traders cannot legally use weighing devices calibrated in units other the SI units. A LACORS report published in March 2010 highlighting widescale use of inappropriate scales in hospitals, sometimes of domestic quality, recommended that on safety grounds NHS hospitals should use Class III (or better) metric-only scales. A Department of Health alert was subsequently sent to all NHS trusts endorsing these recommendations.
Assessment of the British metrication programme
Following the publication of the UK government's White Paper on metrication in February 1972, the journal New Scientist, reported the lack of urgency in the minister's handling of the issue and described how the government refused to use its purchasing power to advance the metrication process. It quoted one [unnamed] metricationalist as saying "[The White Paper] is not firming things up at all. It will turn us into a dual country".
Studies of the British metrication programme included two by US government agencies – NASA in October 1976 and the National Bureau of Standards in April 1979. Both reports noted that the British metrication programme lacked leadership from government. This manifest itself in many ways including:
- The failure to appoint the Metrication Board at the start of the metrication programme meant that industry had to take the lead in a programme that affected everybody and did not have the machinery to implement metrication in, especially, the retail sector.
- The failure of government to provide funding – much of the initial work was funded by industry itself.
- The failure to provide a "champion" for metrication – such a role fell outside the remit of the Metrication Board.
- The belief that the programme could be accomplished purely by voluntary means – both reports highlighted the need for appropriate legislation to keep the programme on track.
These sentiments were echoed in the final report of the Metrication Board.
In 2000, after the deadline for the cessation of selling loose produce by imperial units had passed, certain traders continued to sell produce from their market stalls in pounds and ounces. They were variously prosecuted for using unlawful scales, giving short measure and failing to display unit price per kilogram. Five such traders, who became known as the Metric Martyrs, appealed to the High Court, but lost their case and in July 2002 were refused leave to appeal to the House of Lords. The Metric Martyrs then appealed to the European Court of Human Rights (ECHR) on the basis that their human rights had been violated, but in February 2004 that court declared that no violation had occurred. Shortly after losing his ECHR appeal Steve Thoburn, one of the Metric Martyrs, died at the age of thirty-nine following a heart attack.
The involvement of the European Commission led metrication to be linked in public debate with Euroscepticism, and traditionally Eurosceptic parts of the British press often exaggerating or inventing the extent of enforced metrication. Example stories include the Daily Star, which on 17 January 2001 claimed that beer would soon have to be sold by the litre in pubs, something not demanded in any EU directive.
Reaction to the UK Metric Association report A Very British Mess (2004), the executive summary of which was published in Science in Parliament, was mixed – the Daily Telegraph, put forward the proposition that the UKMA's assertion of hostility or indifference by the British public to the metric system was due to the lack of cultural empathy rather than it being "Foreign or European" while the Economist said that retreat [to the imperial system] was impossible and the current impasse costly".
An Ipsos MORI telephone survey conducted in September 2007 for The Sun newspaper, entitled "Northern Rock, Metric Measurements And The EU Constitutional Treaty" found significant opposition to metrication in the sample questioned when asked "How strongly would you support and oppose Britain switching to use entirely metric measurements, rather than continuing to use traditional units?": The opinion breakdown showed that the greatest variation in opinion was between tabloid and broadsheet readers rather than age, social class or voting intention.
In its final report , the Metrication Board wrote "Today metric units are used in many important areas of British life – including education; agriculture; construction; industrial materials; much of manufacturing; the wholesaling of petrol, milk, cheese and textiles; fatstock markets and many port fish auctions, nearly all the principal prepacked foods; posts and telecommunications: most freight and customs tariffs; all new and revised Ordnance Survey maps; and athletics. Nevertheless, taken as a whole, Britain is far from being wholly metric." The report major identified areas that had not yet been metricated as being the retail petrol trade [metricated in 1984], retail sale of loose goods [metricated in 2000] and roads signs [not metricated]
The report did not address issues related to the media such as news reports and advertising.
The regulations that came into force on 1 January 2000 regarding the sale of loose goods effectively made it mandatory to use metric units in the retail industry for most products though supplementary indicators using certain imperial units[Note 6] were still permitted under United Kingdom law. Various price-marking orders prescribed the sizes in which products could be marketed. Some of these restrictions, such as wine being sold in 750 ml bottles, were derived from EU directives, while others, such as the production of bread in 400 g or 800 g loaves, were applicable to the United Kingdom only. However, the principle of the Internal Market, backed up by a judgment of the European Court of Justice, required that any product that was legally produced anywhere in the European Union could, in most cases, be sold anywhere in the EU. Thus a 500 g packet of rye bread, legally manufactured in Germany, could be sold in the United Kingdom even though it was not lawful under British law for a British baker to produce an identical 500 g packet of bread.
A consultation by the EU aimed at bypassing this impasse was launched in 2004. The outcome was Directive 2007/45/EC which deregulated prescribed packaging of most products, leaving only wines and liqueurs subject to prescribed EU-wide pre-packaging legislation. While this effectively undid much of the work done by the Metrication Board by deregulating prescribed sizing for over 40 products, the law relating to labelling of products has remained unchanged.
The principal channels for dissemination of information are word of mouth, television and radio, newspapers and magazines and the World Wide Web. The compilers of the information vary from private individuals to employees of private companies and the civil service. The unit systems used in the information from the different channels varies considerably. There are no laws controlling the unit systems that private individuals use when compiling information, whereas company employees and civil servants might be constrained by standards and procedures which dictate the measures to be used.
The civil service is bound by law to follow EU directives relating to public administration. Government disseminators of information include the Office for National Statistics and the Ordnance Survey office both of whom, being government departments, use metric units in their work.
Newspaper styles vary.
- The Daily Telegraph states: "Use common British weights and measures even in foreign stories unless the context dictates otherwise. Metric weights and measures should be followed by British equivalents in brackets."
- The Times Style Guide begins, "The Times should keep abreast of the trend in the UK to move gradually towards all-metric use, but given the wide age range and geographical distribution of our readers, some continuing use of imperial measurements is necessary." The Times prefers metric units in most circumstances but it prefers Imperial weights and measures for personal heights and weights. It also prefers hectares to acres but prefers square miles to square kilometres. It also prefers the mile in expressing distances globally.
- The Guardian prefers metric units in most circumstances, however, the examples it gives for personal heights and weights put metric measures first. It prefers both hectares to acres and square kilometres over square miles but it retains the preference for miles over kilometres.
- The Economist prefers metric units for "most non-American contexts", explicitly preferring kilometres to miles, but permits "the measurements more familiar to Americans" in American contexts", recommending that the equivalent in the other system (metric or American) should also be given on first use.
Unit of measure inconsistencies
These rules of style have led to inconsistencies between administrative documents and the resulting news reports. Examples include:
- On 18 March 2005, Johnson Beharry was awarded the Victoria Cross for valour while serving in Iraq. The official citation included the text "...drive the vehicle through the remainder of the ambushed route, some 1500m long". The BBC, in paraphrasing the citation, used the expression "He guided the column through a mile of enemy ground".
- The Channel Tunnel Rail Link carries traffic from the Channel Tunnel to London. Government reports cited the design speed on the link as being 300 km/h while the BBC cited speeds of 186 mph.
- Although the Met Office first started using the Celsius temperature scale for weather forecasts in 1962 the press adopted a convention of using degrees Celsius in headlines relating to low temperatures and Fahrenheit for high temperatures. In an article in The Times published in February 2006, the writer suggested that the rationale was one of emphasis: "-6 °C" sounds colder than "21 °F" and "94 °F" sounds more impressive than "34 °C".
Road and rail transport
Standards pertaining to transport infrastructure were metricated using soft conversions, as part of the general metrication of the engineering industry – the standard railway track gauges fixed at 4 ft 8½ in in 1845 was redefined as 1,435 mm  – a decrease of 0.1 mm but well within the engineering tolerances. Motorway marker posts used by road maintenance teams and emergency services demarcate locations in multiples of 100 m. Standards relating to the design and building of new road and rail vehicles have been metric since the engineering changeover in the 1970s. Imperial units have however retained for both road and railway signage except on new railways such as the Channel Tunnel Rail Link, and the Tyne and Wear Metro and London Tramlink which along with all other modern British tram systems also operate in metric. The Cambrian Line has also changed to metric units with the change to ERMTS signalling. London Underground has converted to using metric units for distances but not for speeds.
The motorist has seen very little metrication – speedometers and mandatory information on car advertisements such as fuel consumption are given in both metric and imperial units; the 1994 TSRGD permitted the use of metric units alongside imperial units (but not on their own) for width and height warning signs and the sale of petrol was metricated in the 1980s. Distances and speed restrictions are shown only in imperial units. However post-Metrication Board innovations such as distances on driver location signs and CO2 emission figures which have never been expressed in imperial units are, for the purpose of this article, seen as post-metrication developments rather than part of the metrication process.
A number of advocacy groups exist to promote either the metric or the imperial system. The groups include:
- Active Resistance to Metrication, founded by Eurosceptic politician Tony Bennett, is best known for its direct action campaign against metric signs.
- The British Weights and Measures Association campaigns for the retention of imperial measurements in the United Kingdom.
- The UK Metric Association campaigns for the complete replacement of the imperial measurement system with the metric system in the United Kingdom.
- Metrication in Australia
- Metrication in Canada
- Metrication in New Zealand
- Metrication in the United States
- Metrication opposition
- A sheet of A4 paper has an area of 1⁄16 m2, A3 an area of 1⁄8 m2 ... and A0 an area of 1 m2
- The following were removed from the list of allowable units for general use with effect from 1 October 1995, though their continued use was permitted in specified circumstances: yard, therm, inch, foot, fathom, mile, acre, fluid ounce, gill, pint, quart, gallon, ounce (troy) , ounce (avoirdupois), pound.
- The units of measure removed from the statute book were the furlong, chain, square mile, rood, cubic yard/foot/inch, bushel, peck, fluid drachm, minim, [imperial or long] ton, hundredweight, cental, quintal, stone, dram, grain, pennyweight, apothecaries ounce, drachm, scruple and the phrase "metric ton"
- The following were removed from the list of allowable units for general use with effect from 1 October 1999: fathom (used for marine navigation), pint (used for the sale of waters, lemonades and fruit juices in returnable containers), gills (sale of spirit drinks), ounce and pound (goods sold loose in bulk) and therm (gas supply).
- The acre was removed from the list of units permitted for economic, public health, public safety or administrative purpose from 1 January 2010 as the Land Registry Office had ceased using it some years previously.
- The units permitted as supplementary indicators under The Weights and Measures (Packaged Goods) Regulations 2006 are the gallon, quart, pint, fluid ounce, pound and the ounce.
White Paper on Metrication (1972) – Summary and Conclusions. London: Department of Trade and Industry Consumer and Competition Policy Directorate.
Final Report of the Metrication Board (1980). London: Department of Trade and Industry Consumer and Competition Policy Directorate.
- "Weights & Measures". Scotlands People (A partnership between General Register Office for Scotland, the National Archives of Scotland and the Court of the Lord Lyon). Retrieved 26 October 2011.
- Scottish Weights and Measures at scan.org.uk. Retrieved 7 April 2012
- Watson, C. M. (1910), British Weights and Measures, London: John Murray, pp. 77–81.
- "An Essay towards a Real Character and a Philosophical Language (Reproduction – 34.7 MB)" (PDF). Retrieved 2 August 2011.
- "An Essay towards a Real Character and a Philosophical Language (Transcription – 127 kB)" (PDF). Retrieved 2 August 2011.
- Carnegie, Andrew (May 1905). James Watt. Doubleday, Page & Company. pp. 59–60. Retrieved 20 October 2011.
- Alder, Ken (2002). The Measure of all Things – The Seven-Year-Odyssey that Transformed the World. London: Abacus. pp. 252–253. ISBN 0 349 11507 9 Check
- "List of commissions and officials 1815–1829 (nos. 1–11)". British-history.ac.uk. 22 June 2003. Retrieved 2 August 2011.
- Scott H Brown (2006). "The life and work of Augustus de Morgan". Applied Probability Trust. Retrieved 16 January 2011.
- Samuel Brown (April 1864). "On the Metric System of Weights and Measures, and its proposed Adoption in this Country". The Assurance Magazine, and Journal of the Institute of Actuaries 11 (5): 263–279. Retrieved 20 April 2012.
- Decimal Association (formed Jun 12, 1854) - Proceedings with an introduction by Professor de Morgan. London. 1854. Retrieved 21 April 2012.
- Zupko, Ronald Edward (1990). Revolution in Measurement - Western European Weights and Measures SInce the Age of Science. Memoirs of the American Philosophical Society 186. pp. 242–245. ISBN 0-87169-186-8.
- "Untitled (page 10)". The Times. 5 May 1864.
- Alder, Ken (2002). The Measure of all Things – The Seven-Year-Odyssey that Transformed the World. London: Abacus. p. 360. ISBN 0 349 11507 9 Check
- Joule, James Prescott (1845). "On the Changes of Temperature Produced by the Rarefaction and Condensation of Air". Philosophical Magazine, Series 3 (Harper & brothers) 26: 369.
- Thomson, William; Joule, James Prescott; Maxwell, James Clerk; Jenkin, Flemming (1873). "First Report – Cambridge 3 October 1862". In Jenkin, Flemming. Reports on the Committee on Standards of Electrical Resistance – Appointed by the British Association for the Advancement of Science. London. pp. 1–3. Retrieved 12 May 2011.
- Thomson, William; Joule, James Prescott; Maxwell, James Clerk; Jenkin, Flemming (1873). "Second report – Newcastle-upon-Tyne 26 August 1863". In Jenkin, Flemming. Reports on the Committee on Standards of Electrical Resistance – Appointed by the British Association for the Advancement of Science. London. pp. 39–41. Retrieved 12 May 2011.
- J C Maxwell (1873). A treatise on electricity and magnetism 1. Oxford: Clarenden Press. pp. 1–3. Retrieved 12 May 2011.
- J C Maxwell (1873). A treatise on electricity and magnetism 2. Oxford: Clarenden Press. pp. 242–245. Retrieved 12 May 2011.
- Professor Everett, ed. (1874). "First Report of the Committee for the Selection and Nomenclature of Dynamical and Electrical Units". Report on the Forty-third Meeting of the British Association for the Advancement of Science held at Bradford in September 1873 (British Association for the Advancement of Science): 222–225. Retrieved 10 May 2011.
- "centimeter-gram-second systems of units". Sizes, Inc. 6 August 2001. Retrieved 7 April 2011.
- "International Bureau of Weights and Measures – The Metre Convention". Bipm.org. Retrieved 2 August 2011.
- S, F. J. (1973). "Standard Kilogram Weights—A Story of Precision Fabrication". Platinum Metals Review (London) (2): 66–68. Retrieved 26 April 2013.
- "National Physical Laboratory – History of Length Measurement". Npl.co.uk. Retrieved 2 August 2011.
- "Metrication timeline". UK Metric Association. 2009. Retrieved 8 December 2009.
- Frederik Hyttel (May 2009). Working man's pint – An investigation of the implementation of the metric system in Britain 1851–1979 (BA thesis). Bath, United Kingdom: Bath Spa University. Retrieved 29 March 2011.
- "Historical Perspectives on Metrication by Jim Humble [Last Director of the UK Metrication Board]". Retrieved 20 March 2012.
- Chalupsky, Albert B; Crawford, Jack J; Carr, Edwin M (1974). Going Metric: An analysis of experiences in five nations and their implications for U.S. Educational Planning (Report). U.S. Department of Health, Education & Welfare, Department of Health. p. 23. AIR-41800-2/74-FR. http://eric.ed.gov/PDFS/ED104725.pdf. Retrieved 19 October 2011.
- "50 years ago today - Introduction of metric system". Pakistan: Dawn.com newspaper. 20 October 2012.
- Metrication Board Final Report: para1.7
- Metrication Board White Paper: para 42–43
- Metrication Board White Paper: para 45
- Hemenway, David (April 1979). "Standards systems in Canada, the U.K., West Germany and Denmark: An overview". Washington DC: [United States] National Bureau of Standards.
- Feilden, GBR (July 1975). "Metrication in the United Kingdom – The Industrial Bonus". In Liptai, R. G. Metrication – Managing the Industrial Transition (American Society for Testing and Materials). pp. 70–75.
- Lighthill, MJ (2 December 1968). "Metrication". Metrication in Medical Journals: A Conference of Editors. London: Royal Society of Medicine. Retrieved 23 March 2012.
- "30 November 1970". Parliamentary Debates (Hansard) (United Kingdom: House of Lords). col. 326–347.
- "Historical Rugby Milestones 1970s". RugbyFootballHistory.com.
- "1975 is target date for metric system". The Times. 27 July 1968.
- "Cruickshank's metrication job". The Times. 30 December 1968.
- "Anti-metrication motion tabled by MPs". The Times. 30 October 1970.
- "Conservative MPs complain of metrication by stealth". The Times (London). 28 October 1970. p. 7.
- "Forward to metrication". The Times. 8 February 1972.
- Metrication Board White Paper: para 107
- "9 December 1970". Parliamentary Debates (Hansard) (House of Commons) 808. col. 417–418. Retrieved 25 March 2012.
- Metrication Board Final Report: Appendix A
- Final Report of the Metrication Board, Appendix A
- Footprints on a global landscape; 150 years of improving the built environment. Hyder Consulting. Retrieved 27 March 2012.
Units cited in this book are the units used in the original design (pg 4). The units for the Forth Road Bridge (opened 1966) are given in feet (pg 48) and for the Humber Bridge (opened 1981) in metres (pg 65)
- Metrication and the UK Building Industry originally published 1995. Retrieved 28 July 2011
- Metrication Board White Paper: para 54
- Metrication Board Final Report, para 2.20/21
- Metrication White Paper para 84 – 86
- "Notes and Comments: The inevitable changes to decimal systems". New Scientist (223): 456. 23 February 1961. Retrieved 20 March 2011.
- Metrication White Paper para 87
- The Cockcroft Report (1982): Mathematics counts – Report of the Committee of Inquiry into the Teaching of Mathematics in Schools under the Chairmanship of Dr WH Cockcroft (Report). London: Her Majesty's Stationery Office. para 299 – 301. http://www.educationengland.org.uk/documents/cockcroft/cockcroft06.html. Retrieved 23 March 2012.
- "Mathematics – The National Curriculum for England Key stages 1–4" (PDF). Joint publication by Department for Education and Employment and Qualifications and Curriculum Authority. 1999. Retrieved 31 May 2013.
- "Mathematics: Ma3 Shape, space and measures". Primary curriculum subjects. Department for Education. Retrieved 2 March 2012.
- Dawson, Robert. "Workman's Tutorial Arithmetic". Halifax, Nova Scotia: Saint Mary's University. Retrieved 27 June 2012.
- Jenny Houssart (6 October 1995). "Tens, nervous headaches". Times Educational Supplement. Retrieved 27 June 2012.
- Ross, Tim (16 May 2012). "'Imperial should be ditched in favour of metric in time for Olympics". The Daily Telegraph. Retrieved 27 May 2012.
- "15 May 2012". Parliamentary Debates (Hansard) (United Kingdom: House of Lords). col. 270.
- Final Report of the Metrication Board, para 1.15
- Final Report of the Metrication Board, para 1.8
- Metrication Board Final Report: para 2.6–9
- "Units of measurement directive". Local Authorities Coordinators of Regulatory Services (LACORS). 16 August 1999. Retrieved 28 March 2012.
- Final Report of the Metrication Board: para 2.14/15
- "Weights and Measures Act 1985 (c. 72), section 8(2)(d)". Statutelaw.gov.uk. Retrieved 2 August 2011.
- "The Measuring Instruments (Capacity Serving Measures) Regulations 2006 (No. 1264)". Statutelaw.gov.uk. 4 July 2011. Retrieved 2 August 2011.
- "Consultation on weights and measures legislation dealing with specified quantities and quantity labelling of foods". National Weights and Measures Laboratory. 23 October 2008. para 5.20. Retrieved 4 April 2012.
- "A History of the Ordnance Survey". Retrieved 2 March 2012. See pages 270–272
- Tim Owen; Elaine Pilbeam (1992). Ordnance Survey: Map Makers to Britain since 1791. Ordnance Survey and HMSO. p. 148. ISBN 0-11-701507-5.
- "Co-ordinate Converter". FieldenMaps.info. 4 May 2009. Retrieved 2011-05-30.
- "Ordnance Survey: Directorate of Field Survey: National Grid Object Name Books". Kew, Richmond: The National Archives. Retrieved 2 April 2012.
- "History". The United Kingdom Hydrographic Office. Retrieved 2 April 2012.
- "Hansard – Lords Sitting – Weather forecasts and temperature scales". 22 November 1971. Retrieved 22 February 2012.
- "Appendix". Final Report of the Metrication Board (1980). Department of Trade and Industry.
- "ft.com/marketsdata". Financial Times. Retrieved 29 February 2012. The actual units of measure are catalogued in the historic data reports and other daughter pages.
- "Our Contracts". London Metal Exchange. Retrieved 30 September 2011.
- "Market Prices and Trends". Farmers Weekly. Retrieved 28 February 2012.
- "Gas bill calculation". National Measurement Office. UK Crown.
- White Paper on Metrication (1972): Summary and Conclusions (para 100) (Report). London: Department of Trade and Industry Consumer and Competition Policy Directorate. 1972. §100. http://ukma.org.uk/sites/default/files/met1972.pdf.
- The CIA world factbook
- "13 January 1978". William Rodgers. Parliamentary Debates (Hansard) (United Kingdom: House of Commons). col. 844.
- "Estimating the cost of conversion of road traffic signs to metric units". Department for Transport. November 2005. Retrieved 31 May 2013.
- "Annual Report and Resource Accounts 2008–09 (For the year ended 31 March 2009)". Department for Transport. 16 July 2009. p. 377 Para 31.3; Note 2. Retrieved 14 March 2010.
- Robin Paice (2006). Metric signs ahead. United Kingdom Metrication Association. ISBN 978-0-9552351-0-8.
- Replacing distance signs only when they reach the end of their natural lives; replacing height, width and length restriction and warning signs over a five-year period and speed restriction signs "overnight".
- Metrication Board White Paper, para 21
- Final Report of the Metrication Board – para 3.15
- "Council Directive 80/181/EEC: On the approximation of the laws of the Member States relating to units of measurement and on the repeal of Directive 71/354/EEC". The Council of the European Communities. 20 December 1979. Retrieved 3 March 2012.
- Directive 80/181/EEC of 20 December 1979 on the approximation of the laws of the Member States relating to units of measurement and on the repeal of Directive 71/354/EEC
- "Weights and Measures Legislation (Scotland)". Food Standards Agency. Retrieved 5 April 2012.
- UK Parliament. The Weights and Measures (Metrication) (Miscellaneous Goods) (Amendment) Order 1994 as made, from legislation.gov.uk.
- "Clearing Up the Metric Muddle". Trading Standards. Gloucestershire County Council. Retrieved 3 March 2012. "Of course a shopper can ask for a pound of apples or half a pound of mince meat, but the retailer must weigh in metric and sell the metric equivalent"
- "Weights and Measures Act 1985". UK Crown. Retrieved 3 March 2012.
- UK Parliament. The Units of Measurement Regulations 1995 as made, from legislation.gov.uk.
- UK Parliament. The Units of Measurement Regulations 2009 as made, from legislation.gov.uk.
- Directive 2009/3/EC of 11 March 2009 amending Council Directive 80/181/EEC on the approximation of the laws of the Member States relating to units of measurement
- Statutory Instrument 2009/3046 - Weights and Measures - The Units of Measurement Regulations 2009, ""The Secretary of State, being a Minister designated(a) for the purposes of section 2(2) of the European Communities Act 1972(b) in relation to units of measurement to be used for economic, health, safety, or administrative purposes, in exercise of the powers conferred by that subsection, makes the following Regulations:"
- Final Report of the Metrication Board: para 2.19
- Directive 2004/22/EC of 31 March 2004 on measuring instruments
- Directive 2009/23/EC of 23 April 2009 on non-automatic weighing instruments
- "One in three hospital scales is inaccurate, LACORS study finds". Local Government Regulation (LACORS). 3 November 2008. Retrieved 27 July 2012.
- "Estates and Facilities Alert: Ref EFA/2010/001". Department of Health, Department of Health, Social Services and Public Safety, Health Facilities Scotland. 15 March 2010. p. 6.
- "Technology Review: World sold on metrication". New Scientist 53 (783): 380. 17 February 1972. Retrieved 25 March 2011.
- Vlannes, PN (October 1976). U.S. Metric Study Mission to the United Kingdom and the Federal Republic of Germany. Washington DC: National Aeronautics and Space Administration (NASA). NASA-TM-X-74307.
- Final Report of the Metrication Board: para 1.6 – 1.8
- "Trader fights metric case". BBC News (The BBC). 6 September 2000. Retrieved 3 March 2012.
- Dyer, Clare (19 February 2002). "Metric martyrs lose court fight". theguardian (London: Guardian News and Media). Retrieved 3 March 2012.
- Steve Thoburn v Sunderland City Council; Colin Hunt v London Borough of Hackney; Julian Harman and John Dove v Cornwall County Council; Peter Collins v London Borough of Sutton (Supreme Court of Judicature, Queens Bench Division, Divisional Court 18 February 2002). Text
- "'Metric martyr' loses appeal". BBC News (The BBC). 15 July 2002. Retrieved 3 March 2012.
- "Metric martyr market trader dies". BBC News (The BBC). 14 March 2004. Retrieved 3 March 2012.
- Drewry, Gavin (2007). "The jurisprudence of British Euroscepticism – A strange banquet of fish and vegetables". Utrecht Law Review 3 (2): 101–115. Retrieved 20 October 2011.
- Paice, Robin (2004). "A very British mess". United Kingdom Metrication Association. ISBN 0-7503-1014-6. Retrieved 4 April 2012.
- Paice, Robin (Autumn 2004). "British Metrication". Science in Parliament (The Parliamentary and Scientific Committee) 61 (4): 7. ISSN 0263-6271. Retrieved 4 April 2012.
- Philip Johnston (12 July 2004). "Home front". The Telegraph (London: Telegraph Media Group). Retrieved 2 March 2012.
- "Measure for measure". The Economist (The Economist Newspaper). 15 July 2004. Retrieved 3 March 2012.
- "Northern Rock, Metric Measurements And The EU Constitutional Treaty". Ipsos MORI. 24 September 2007. Q12. Retrieved 23 February 2012.
- "EU survey for The Sun". Ipsos MORI. September 2007. Pg 23. Retrieved 25 March 2012.
- Metrication Board Final Report para 1.6 & 1.10
- Rewe-Zentral AG v Bundesmonopolverwaltung für Branntwein, Case 120/78 (European Court of Justice 20 February 1979) (“Measures heaving an effect equivalent to quantitative restrictions”). Text
- "Legal metrology and pre-packaging – Pre-packaging – Pack sizes". European Commission – Enterprise and Industry. Retrieved 28 March 2012.
- "Government response to the consultation on specified quantities – Non pre-packages and food information". London: National Measurement Office, Department for Business Innovation and Skills. September 2009. Retrieved 28 March 2012.
- "Guidance note on UK implementation of a European directive deregulating specified quantities (fixed pack sizes)". National Weights and Measures Laboratory, an Executive Agency of the Department for Innovation, Universities and Skills. January 2009. Retrieved 28 March 2012.
- The Council of the European Communities (27 May 2009). "Council Directive 80/181/EEC of 20 December 1979 on the approximation of the laws of the Member States relating to Unit of measurement and on the repeal of Directive 71/354/EEC". Retrieved 8 June 2010.
- Barnett, Roger (June 1992). British Rail’s InterCity 125 and 225 (Report). Berkeley, California: The University of California Transportation Center. p. 34. UCTC No. 114. http://www.uctc.net/papers/114.pdf. Retrieved 19 October 2011.
- "Intercity 225: Fastest in the fleet". BBC. 17 October 2000. Retrieved 19 October 2011.
- "Telegraph style book: numbers, measures and money". web page. Telegraph Media Group Limited. 2012. Retrieved 23 June 2012.
- Austin, Tim (2003). The Times Style and Usage Guide. Times Books. ISBN 9780007145058.
- "Style Guide". London: Guardian News and Media Limited. 19 December 2008. Retrieved 12 May 2010.
- "Style Guide". The Economist Newspaper Limited. 2012. "Figures". Retrieved 6 March 2014.
The Economist Style Guide. The Economist Newspaper Limited. 2012. pp. 56–57. ISBN 9781846686061.
- "Honours and Awards". The London Gazette. 18 March 2005. Retrieved 3 April 2010.
- "Soldier wins VC for Iraq bravery". BBC. 18 March 2005. Retrieved 3 April 2010.
- Select Committee Review - South East England Regional Assembly. Kent County Council. Winter 2002/3. para 2.6:10. Retrieved 31 May 2013.
- "High-speed rail line switched on". BBC. 8 January 2007. Retrieved 3 April 2010.
- "Measure for measure". The Times (Times Newspapers). 23 February 2006.
- "An Act for regulating the Gauge of Railways". 18 October 1846. Retrieved 26 April 2010.
- "Guidance on Gauging". Rail Safety and Standards Board Limited. 3 October 2009. Retrieved 26 April 2010.
- Hansard. "21 October 2009 : Column 1446W". Retrieved 4 November 2009.
- Railway Construction and Operation Requirements – Structural and Electrical Clearances. London: Department of Transport. 1977. ISBN 0-11-550443-5. Retrieved 29 March 2012. ""an up-to-date metric guide" (para 1.2)"
- "Line facts". Transport for London. Retrieved 26 April 2010.
- Martyn Brown (7 June 2010). "This U-turn on metric is miles better". Daily Express. Retrieved 29 March 2012.
- "Statutory Instrument 1994 No. 1519; The Traffic Signs Regulations and General Directions 1994". Controller of HMSO. 12 August 1994. Retrieved 29 March 2012.
- "Driver location signs – Helping pinpoint your location on the motorway network". The Automobile Association (AA). 2011. Retrieved 29 March 2012.
- "The Green Guide to Car CO2 Emissions". Car Pages: car knowledge since 1999. 2012. Retrieved 29 March 2012.
- Summers, Chris (2 September 2004). "Will we ever go completely metric?". BBC News. Retrieved 21 October 2011.
- Foggo, Daniel (3 March 2002). "Raiders wage secret war on metric signs". Daily Telegraph (London). Retrieved 21 October 2011.
- "Record Details [British Weights and Measures Association (BWMA)]". DANGO – Database of Archives of Non-Governmental Organisations. Retrieved 21 October 2011.
- "Record Details [United Kingdom Metric Association (UKMA)]". DANGO – Database of Archives of Non-Governmental Organisations. Retrieved 21 October 2011.
- Grierson, Philip (1995). English Linear Measures: an essay in origins. 'The Stenton Lecture 1971', University of Reading.
- McGreevy, Thomas (1995). The Basis of Measurement: Historical Aspects. Chippenham, Picton Pub. ISBN 0-948251-82-4.
- McGreevy, Thomas (1997). The Basis of Measurement: Metrication and Current Practice. Chippenham, Picton Pub. ISBN 0-948251-84-0.