Jump to content

Rendezvous Docking Simulator

Coordinates: 37°5′8″N 76°22′41″W / 37.08556°N 76.37806°W / 37.08556; -76.37806
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 11:14, 16 November 2022 (Removed parameters. | Use this bot. Report bugs. | Suggested by Whoop whoop pull up | #UCB_webform 2900/3154). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Rendezvous Docking Simulator
docking practice during Apollo program
Rendezvous Docking Simulator is located in Virginia
Rendezvous Docking Simulator
Rendezvous Docking Simulator is located in the United States
Rendezvous Docking Simulator
LocationHampton, Virginia
Coordinates37°5′8″N 76°22′41″W / 37.08556°N 76.37806°W / 37.08556; -76.37806
Built1963
ArchitectNASA
NRHP reference No.85002809
VLR No.114-0141
Significant dates
Added to NRHPOctober 3, 1985[2]
Designated NHLOctober 3, 1985[3]
Designated VLRFebruary 18, 1986[1]

The Rendezvous Docking Simulator, also known as the Real-Time Dynamic Simulator, is a simulator at the Langley Research Center. It was constructed for the Gemini program in Building 1244 and it became operational in June 1963 at a cost of $320,000[4] and later reconfigured for the Apollo program.[4] The simulator consists of a gantry frame, with an overhead carriage from which test craft were suspended by cables.[5] A gimbal was powered hydraulically and was capable of changing pitch and yaw at a rate of 1 radian per second or roll at 2 radians per second. The gantry also moved like an overhead crane using electric motors and was capable of travelling 210 feet (64 m) longitudinally at up to 20 feet per second (6.1 m/s), 16 feet (4.9 m) laterally at up to 4 feet per second (1.2 m/s) and vertically 45 feet (14 m) at up to 10 feet per second (3.0 m/s).[6]

It is the only surviving simulator from the NASA Gemini and Apollo space programs that was used by astronauts to practice docking of space capsules with other vessels.[3] Ability to dock reliably with the lunar landing module was a crucial skill essential for the mission to return from the moon.[5] The docking simulator was used alongside the Projection Planetarium in training exercises.

It was declared a National Historic Landmark in 1985.[3][5][7]

Currently it is stored, hanging from the rafters in Building 1244, a vast hangar at Langley, and there are no plans for it otherwise.[3][5]

See also

References

  1. ^ "114-0141 Rendezvous Docking Simulator". Virginia Department of Historic Resources. February 20, 2019. Archived from the original on April 15, 2022. Retrieved April 15, 2022.
  2. ^ "National Register Information System". National Register of Historic Places. National Park Service. January 23, 2007.
  3. ^ a b c d "Rendezvous Docking Simulator". National Historic Landmark summary listing. National Park Service. Archived from the original on May 12, 2008. Retrieved April 26, 2008.
  4. ^ a b Hangar – NasaCRgis
  5. ^ a b c d Harry A. Butowsky (May 15, 1984). "National Register of Historic Places Inventory-Nomination: Rendezvous Docking Simulator / Real-Time Dynamic Simulator" (pdf). National Park Service. and Accompanying five photos, from 1964 and 1984 (32 KB)
  6. ^ "Rendezvous Docking Simulator" (PDF). NASA. January 25, 1966. Archived from the original (PDF) on March 4, 2016.
  7. ^ Harry A. Butowsky (May 15, 1984). "National Register of Historic Places Inventory-Nomination: Rendezvous Docking Simulator / Real-Time Dynamic Simulator" (PDF). National Park Service. (version at Virginia DHR, also including 5 maps showing location of Langley and the simulator within Langley)